EN 62149-7:2012

SLOVENSKI STANDARD
01-julij-2012
$NWLYQHNRPSRQHQWHLQQDSUDYHRSWLþQLKYODNHQ7HKQLþQLVWDQGDUGLGHO
'LVNUHWQLQPVNLODVHUMLVSRYUãLQVNRHPLVLMRLQQDYSLþQLPUHVRQDWRUMHP,(&

Fibre optic active components and devices - Performance standards - Part 7: 1 310 nm
discrete vertical cavity surface emitting laser devices (IEC 62149-7:2012)
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhaltensnormen - Teil 7: 1
310 nm oberflächenemittierender Laser-Bauteile mit vertikalem Resonator (IEC 62149-
7:2012)
Composants et dispositifs actifs à fibres optiques - Norme de performance - Partie 7:
Dispositifs discrets à laser 1 310 nm émettant en surface (CEI 62149-7:2012)
Ta slovenski standard je istoveten z: EN 62149-7:2012
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62149-7
NORME EUROPÉENNE
May 2012
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic active components and devices -
Performance standards -
Part 7: 1 310 nm discrete vertical cavity surface emitting laser devices
(IEC 62149-7:2012)
Composants et dispositifs actifs  Aktive Lichtwellenleiterbauelemente
à fibres optiques - und -geräte -
Norme de performance - Betriebsverhaltensnormen -
Partie 7: Dispositifs discrets Teil 7: 1 310 nm oberflächenemittierender
à laser 1 310 nm émettant en surface Laser-Bauteile mit vertikalem Resonator
(CEI 62149-7:2012) (IEC 62149-7:2012)

This European Standard was approved by CENELEC on 2012-05-03. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62149-7:2012 E
Foreword
The text of document 86C/1021/CDV, future edition 1 of IEC 62149-7, prepared by IEC/TC 86 "Fibre
optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2013-02-03
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-05-03
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62149-7:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60191 series NOTE Harmonized as EN 60191 series (not modified).
IEC 60747-5-1 NOTE Harmonized as EN 60747-5-1.
IEC 60793-2 NOTE Harmonized as EN 60793-2.
IEC 60874 series NOTE Harmonized as EN 60874 series (not modified).
IEC 61280-1-3 NOTE Harmonized as EN 61280-1-3.
IEC 62007-1 NOTE Harmonized as EN 62007-1.
IEC 62007-2 NOTE Harmonized as EN 62007-2.
IEC 62148-1 NOTE Harmonized as EN 62148-1.
IEC 62149-1 NOTE Harmonized as EN 62149-1.
IEC 62149-4 NOTE Harmonized as EN 62149-4.

- 3 - EN 62149-7:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60749 Series Semiconductor devices - Mechanical and EN 60749 Series
climatic test methods
IEC 60825-1 - Safety of laser products - Part 1: Equipment EN 60825-1 -
classification and requirements

IEC 60950-1 - Information technology equipment - Safety - EN 60950-1 -
Part 1: General requirements
IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures - Part 2-4: Tests -
Fibre/cable retention
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures - Part 2-19: Tests -
Damp heat (steady state)
IEC 61300-2-48 - Fibre optic interconnecting devices and EN 61300-2-48 -
passive components - Basic test and
measurement procedures - Part 2-48: Tests -
Temperature-humidity cycling
IEC 62148-15 - Fibre optic active components and devices - EN 62148-15 -
Package and interface standards - Part 15:
Discrete vertical cavity surface emitting laser
packages
IEC Guide 107 1998 Electromagnetic compatibility - Guide to the - -
drafting of electromagnetic compatibility
publications
IEC 62149-7 ®
Edition 1.0 2012-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic active components and devices – Performance standards –

Part 7: 1 310-nm discrete vertical cavity surface emitting laser devices

Composants et dispositifs actifs à fibres optiques – Norme de performance –

Partie 7: Dispositifs discrets à laser 1 310 nm émettant en surface

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
V
CODE PRIX
ICS 33.180.20 ISBN 978-2-8322-0072-8

– 2 – 62149-7 © IEC:2012
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, symbols and abbreviated terms . 8
3.1 Terms and definitions . 8
3.2 Symbols and abbreviated terms. 9
4 Product parameters . 9
4.1 Absolute limiting ratings . 9
4.2 Operating environment . 9
4.3 Functional specification . 10
4.4 Diagrams . 10
5 Testing . 10
5.1 General . 10
5.2 Characterization testing . 10
5.3 Performance testing . 10
6 Environmental specifications . 10
6.1 General safety . 10
6.2 Laser safety . 10
6.3 Electromagnetic compatibility (EMC) requirements . 11
Annex A (normative) Specifications for multimode 1 310-nm VCSEL device without a
monitor photodiode (Case a) . 12
Annex B (normative) Specifications for multimode 1 310-nm VCSEL device with a
monitor photodiode (Case b) . 16
Annex C (normative) Specifications for single-mode 1 310-nm VCSEL device without a
monitor photodiode (Case c) . 21
Annex D (normative) Specifications for single-mode 1 310-nm VCSEL device with a
monitor photodiode (Case d) . 27
Bibliography . 33

Table 1 – Subcategorized specifications of the 1 310-nm discrete VCSEL . 7
Table 2 – Operating environment . 10
Table A.1 – Absolute limiting ratings . 12
Table A.2 – Operating conditions for functional specification. 12
Table A.3 – Functional specification . 13
Table A.4 – Performance test plan . 14
Table A.5 – Recommended performance test failure criteria . 15
Table B.1 – Absolute limiting ratings . 16
Table B.2 – Operating conditions for functional specification. 16
Table B.3 – Functional specification . 17
Table B.4 – Performance test plan . 19
Table B.5 – Recommended performance test failure criteria . 20

62149-7 © IEC:2012 – 3 –
Table C.1 – Absolute limiting ratings . 21
Table C.2 – Operating conditions for functional specification . 21
Table C.3 – Functional specification . 22
Table C.4 – Performance test plan . 25
Table C.5 – Recommended performance test failure criteria . 26
Table D.1 – Absolute limiting ratings . 27
Table D.2 – Operating conditions for functional specification . 27
Table D.3 – Functional specification . 28
Table D.4 – Performance test plan . 31
Table D.5 – Recommended performance test failure criteria . 32

– 4 – 62149-7 © IEC:2012
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PERFORMANCE STANDARDS –
Part 7: 1 310-nm discrete vertical cavity
surface emitting laser devices

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all qu
...