EN 50463-2:2012
(Main)Railway applications - Energy measurement on board trains - Part 2: Energy measuring
Railway applications - Energy measurement on board trains - Part 2: Energy measuring
This European Standard covers the requirements applicable to the Energy Measurement Function (EMF) of an Energy Measurement System (EMS) for use on board traction units for measurement of energy supplied directly from/to the Contact Line system. This European Standard also gives requirements for the Current Measurement Function (e.g. current sensor), the Voltage Measurement Function (e.g. voltage sensor) and the Energy Calculation Function (e.g. energy meter). The Conformity Assessment arrangements for the Voltage Measurement Function, Current Measurement Function, the Energy Calculation Function and a complete Energy Measurement Function are also specified in this document. The standard has been developed taking into account that in some applications the EMF may be subjected to legal metrological control. All relevant metrological aspects are covered in this part.
Bahnanwendungen - Energiemessung auf Bahnfahrzeugen - Teil 2: Energiemessung
Applications ferroviaires - Mesure d'énergie à bord des trains - Partie 2 : Mesure d'énergie
Železniške naprave - Merjenje energije na vlaku - 2. del: Merjenje energije
Ta evropski standard zajema zahteve za funkcijo merjenja energije (EMF) sistema merjenja energije (EMS), ki se uporablja na vlakovnih kompozicijah za merjenje energije, dovajane neposredno iz sistema kontaktnega vodnika ali vanj. Ta evropski standard določa tudi zahteve za funkcijo merjenja toka (npr. tokovni senzor), funkcijo merjenja napetosti (npr. napetostni senzor) in funkcijo izračuna energije (npr. števec energije). V tem dokumentu so navedeni tudi načini ugotavljanja skladnosti funkcije merjenja napetosti, funkcije merjenja toka, funkcije izračuna energije in celotne funkcije merjenja energije. Standard je bil pripravljen ob upoštevanju dejstva, da se lahko pri nekaterih načinih uporabe funkcije merjena energije izvaja zakonit metrološki nadzor. Ta del zajema vse zadevne metrološke vidike.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 50463-2:2013
01-marec-2013
1DGRPHãþD
SIST EN 50463:2008
Železniške naprave - Merjenje energije na vlaku - 2. del: Merjenje energije
Railway applications - Energy measurement on board trains - Part 2: Energy measuring
Bahnanwendungen - Energiemessung auf Bahnfahrzeugen - Teil 2: Energiemessung
Applications ferroviaires - Mesure d'énergie à bord des trains - Partie 2 : Mesure
d'énergie
Ta slovenski standard je istoveten z: EN 50463-2:2012
ICS:
45.060.10 9OHþQDYR]LOD Tractive stock
SIST EN 50463-2:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 50463-2:2013
---------------------- Page: 2 ----------------------
SIST EN 50463-2:2013
EUROPEAN STANDARD
EN 50463-2
NORME EUROPÉENNE
December 2012
EUROPÄISCHE NORM
ICS 45.060.10 Supersedes EN 50463:2007 (partially)
English version
Railway applications -
Energy measurement on board trains -
Part 2: Energy measuring
Applications ferroviaires - Bahnanwendungen -
Mesure d'énergie à bord des trains - Energiemessung auf Bahnfahrzeugen -
Partie 2 : Mesure d'énergie Teil 2: Energiemessung
This European Standard was approved by CENELEC on 2012-10-15. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50463-2:2012 E
---------------------- Page: 3 ----------------------
SIST EN 50463-2:2013
EN 50463-2:2012 - 2 -
Contents
Foreword .5
Introduction .6
1 Scope . 8
2 Normative references . 9
3 Terms, definitions, abbreviations and symbols .10
3.1 Terms and definitions . 10
3.2 Abbreviations . 13
3.3 Symbols . 14
4 Requirements .14
4.1 General . 14
4.2 Energy Measurement Function (EMF) . 15
4.3 Sensors . 19
4.4 Energy Calculation Function (ECF) . 31
5 Conformity assessment .42
5.1 General . 42
5.2 Testing framework .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.