EN 62148-18:2015

SLOVENSKI STANDARD
01-september-2015
$NWLYQHNRPSRQHQWHLQQDSUDYHRSWLþQLKYODNHQ6WDQGDUGL]DRKLãMDLQYPHVQLNH
GHO6HULMVNHRGGDMQLãNHLQVSUHMHPQLãNHNRPSRQHQWH*ELWV]DXSRUDER]
YPHVQLNRP]/&NRQHNWRUML,(&
Fiber optic active components and devices: package and interface standards - Part 18:
40-Gbit/s serial transmitter and receiver components for use with the LC connector
interface (IEC 62148-18:2014)
Aktive Lichtwellenleiterbauelemente und -geräte - Gehäuse- und Schnittstellennormen -
Teil 18: Serielle Sende- und Empfangsmodule für 40 Gbit/s für Schnittstellen mit LC-
Steckverbinder (IEC 62148-18:2014)
Composants et dispositifs actifs à fibres optiques - Normes de boîtier et d'interface -
Partie 18 : Composants d'émetteurs et de récepteurs série à 40 Gbit/s, destinés à être
utilisés avec les interfaces des connecteurs LC (IEC 62148-18:2014)
Ta slovenski standard je istoveten z: EN 62148-18:2015
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62148-18

NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2015
ICS 33.180.20
English Version
Fibre optic active components and devices - Package and
interface standards - Part 18: 40-Gbit/s serial transmitter and
receiver components for use with the LC connector interface
(IEC 62148-18:2014)
Composants et dispositifs actifs à fibres optiques - Normes Aktive Lichtwellenleiterbauelemente und -geräte - Gehäuse-
de boîtier et d'interface - Partie 18 : Composants und Schnittstellennormen - Teil 18: Serielle Sende- und
d'émetteurs et de récepteurs série à 40 Gbit/s, destinés à Empfangsmodule für 40 Gbit/s für Schnittstellen mit
être utilisés avec les interfaces des connecteurs LC LC-Steckverbinder
(IEC 62148-18:2014) (IEC 62148-18:2014)
This European Standard was approved by CENELEC on 2014-12-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62148-18:2015 E
Foreword
The text of document 86C/1227/CDV, future edition 1 of IEC 62148-18, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 62148-18:2015.
The following dates are fixed:
(dop) 2015-09-30
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2017-12-30
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62148-18:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60191 NOTE Harmonized in EN 60191 series (not modified).
IEC 61281-1 NOTE Harmonized as EN 61281-1.
IEC 61754-20 NOTE Harmonized as EN 61754-20.
ISO 1101 NOTE Harmonized as EN ISO 1101.

- 3 - EN 62148-18:2015
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 62148-1 -  Fibre optic active components and devices - EN 62148-1 -
Package and interface standards -
Part 1: General and guidance
IEC Guide 107 -  Electromagnetic compatibility - Guide to the - -
drafting of electromagnetic compatibility
publications
IEC 62148-18 ®
Edition 1.0 2014-11
INTERNATIONAL
STANDARD
Fibre optic active components and devices – Package and interface standards –

Part 18: 40-Gbit/s serial transmitter and receiver components for use with

the LC connector interface
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
V
ICS 33.180.20 ISBN 978-2-8322-1923-2

– 2 – IEC 62148-18:2014 © IEC 2014
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Abbreviations . 7
4 Electromagnetic compatibility (EMC) requirements . 8
5 Classification . 8
6 Specification of 40-Gbit/s serial transmitter component for LC connectors without
thermo-electric cooler . 8
6.1 General . 8
6.2 Electrical interface . 8
6.2.1 General . 8
6.2.2 Numbering of electrical terminals . 8
6.2.3 Electrical terminal assignment . 9
6.3 Outline and footprint . 11
6.3.1 Drawing of package outline . 11
6.3.2 Drawing of footprint . 13
7 Specification of 40-Gbit/s serial transmitter component for LC connectors with
thermo-electric cooler . 14
7.1 General . 14
7.2 Electrical interface . 14
7.2.1 General . 14
7.2.2 Numbering of electrical terminals . 15
7.2.3 Electrical terminal assignment . 16
7.3 Outline and footprint . 18
7.3.1 Drawing of package outline . 18
7.3.2 Drawing of footprint . 20
8 Specification of 40-Gbit/s serial transmitter component for LC connectors with
thermo-electric cooler and built-in driver . 21
8.1 General . 21
8.2 Electrical interface . 21
8.2.1 General . 21
8.2.2 Numbering of electrical terminals . 22
8.2.3 Electrical terminal assignment . 23
8.3 Outline and footprint . 25
8.3.1 Drawing of package outline . 25
8.3.2 Drawing of footprint . 27
9 Specification of receiver component for LC connectors with PIN . 28
9.1 General . 28
9.2 Electrical interface . 28
9.2.1 General . 28
9.2.2 Numbering of electrical terminals . 29
9.2.3 Electrical terminal assignment . 29
9.3 Outline and footprint . 31

IEC 62148-18:2014 © IEC 2014 – 3 –
9.3.1 Drawing of package outline . 31
9.3.2 Drawing of footprint . 33
Bibliography . 35

Figure 1 – Electrical terminal numbering assignments . 8
Figure 2 – Block diagram . 9
Figure 3 – Package outline drawing . 11
Figure 4 – Recommended pattern layout for the PCB . 13
Figure 5 – Electrical terminal numbering assignments . 15
Figure 6 – Block diagram . 16
Figure 7 – Package outline . 18
Figure 8 – Recommended pattern layout for the PCB . 20
Figure 9 – Electrical terminal numbering assignments . 22
Figure 10 – Block diagram . 23
Figure 11 – Package outline . 25
Figure 12 – Recommended pattern layout for the PCB . 27
Figure 13 – Electrical terminal numbering assignments . 29
Figure 14 – Block diagram . 29
Figure 15 – Package outline . 31
Figure 16 – Recommended patter
...