EN 60626-1:1995

SLOVENSKI STANDARD
01-junij-1998
Combined flexible materials for electrical insulation - Part 1: Definitions and
general requirements (IEC 60626-1:1995)
Combined flexible materials for electrical insulation -- Part 1: Definitions and general
requirements
Flexible Mehrschichtisolierstoffe zur elektrischen Isolation -- Teil 1: Begriffe und
allgemeine Anforderungen
Matériaux combinés souples destinés à l'isolement électrique -- Partie 1: Définitions et
prescriptions générales
Ta slovenski standard je istoveten z: EN 60626-1:1995
ICS:
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

NORME CEI
INTERNATIONALE IEC
626-1
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
1995-07
Matériaux combinés souples destinés
à l'isolement électrique —
Partie 1:
Définitions prescriptions générales
et
Combined flexible materials
for electrical insulation —
Part 1:
Definitions and general requirements
© CEI 1995 Droits de reproduction réservés — Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun pro- any form or by any means, electronic or mechanical,
cédé, électronique ou mécanique, y compris la photocopie et including photocopying and microfilm, without permission
raccord écrit de l'éditeur. les microfilms, sans in writing from the publisher.
Bureau Central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève, Suisse
Commission Electrotechnique Internationale
CODE PRIX
International Electrotechnical Commission
PRICE CODE F
IEC Me»Inytaponnae 3nelcrpoTexHu g
ecnan HOMHCCHH
Pour prix, voir catalogue en vigueur
• •
For price, see current catalogue

626-1 ©IEC:1995 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMBINED FLEXIBLE MATERIALS
FOR ELECTRICAL INSULATION -
Part 1: Definitions and general requirements
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to
promote international cooperation on all questions concerning standardization in the electrical and
electronic fields. To this end and in addition to other activities, the IEC publishes International Standards.
Their preparation is entrusted to technical committees; any IEC National Committee interested in
the subject dealt with may participate in this preparatory work. International, governmental and
non -governmental organizations liaising with the IEC also participate in this preparation. The IEC
collaborates closely with the International Organization for Standardization
(ISO) in accordance with
conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of the IEC on technical matters, prepared by technical committees on
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
3) They have the form of recommendations for international use published in the form of standards, technical
reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
International Standard IEC 626-1 has been prepared by sub-committee 15C:
Specifications, of IEC technical committee 15: Insulating materials.
This second edition cancels and replaces the first edition published in 1979 of which it
constitutes a minor revision.
The text of this standard is based on the following documents:
DIS
Report on voting
15C/474/DIS 15C/528/RVD
Full information on the voting for the approval of this standard can be found in the repo
rt
on voting indicated in the above table.

626-1 ©IEC:1995 – 5 –
INTRODUCTION
This International standard is one of a series which deals with combined flexible materials
consisting of two or more different insulating materials laminated together. The
components of the combined materials are plastic films and/or fibrous materials such as
papers, woven or non-woven fabrics, impregnated or not impregnated.
This series consist of three parts describing:
Part 1: Definitions and general requirements (IEC 626-1)
Part 2: Methods of test (IEC 626-2)
Part 3: Specifications for individual materials (IEC 626-3)
...