Evaluation and qualification of electrical insulation systems

Establishes the basis for estimating the ageing of electrical insulation systems (EIS) under conditions of either electrical, thermal, mechanical, environmental or multifactor stresses. It specifies the principles and procedures that should be followed, during the development of EIS functional test and evaluation procedures, to establish the service life for a specific insulation system.

Bewertung und Kennzeichnung von elektrischen Isoliersystemen

Evaluation et qualification des systèmes d'isolation électrique

Etablit les bases de l'estimation du vieillissement des systèmes d'isolation électrique (SIE) dans des conditions de contraintes électriques, thermiques, mécaniques, environnementales ou multifactorielles. Elle spécifie les principes ou les procédures qu'il convient de suivre, au cours du développement d'essais fonctionnels ou de méthodes d'évaluation, pour établir la durée de vie d'un système d'isolation spécifique.

Evaluation and qualification of electrical insulation systems

General Information

Status
Withdrawn
Publication Date
09-Jan-2000
Withdrawal Date
31-Dec-2002
Drafting Committee
IEC/TC 112 - IEC_TC_112
Parallel Committee
IEC/TC 98 - IEC_TC_98
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Oct-2007
Completion Date
01-Oct-2007

Relations

Effective Date
28-Jan-2023

Get Certified

Connect with accredited certification bodies for this standard

UL Solutions

Global safety science company with testing, inspection and certification.

ANAB United States Verified

CEPREI Certification Center (Guangzhou Saibao)

Pioneer of third-party certification, subsidiary of Electronic Fifth Research Institute.

CNAS China Verified

CESI Beijing Certification (Saisi)

Subsidiary of China Electronics Standardization Institute (CESI), established 1963.

CNAS China Verified

Sponsored listings

Frequently Asked Questions

EN 60505:2000 is a standard published by CLC. Its full title is "Evaluation and qualification of electrical insulation systems". This standard covers: Establishes the basis for estimating the ageing of electrical insulation systems (EIS) under conditions of either electrical, thermal, mechanical, environmental or multifactor stresses. It specifies the principles and procedures that should be followed, during the development of EIS functional test and evaluation procedures, to establish the service life for a specific insulation system.

Establishes the basis for estimating the ageing of electrical insulation systems (EIS) under conditions of either electrical, thermal, mechanical, environmental or multifactor stresses. It specifies the principles and procedures that should be followed, during the development of EIS functional test and evaluation procedures, to establish the service life for a specific insulation system.

EN 60505:2000 is classified under the following ICS (International Classification for Standards) categories: 29.080.30 - Insulation systems. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 60505:2000 has the following relationships with other standards: It is inter standard links to EN 60505:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 60505:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2000
Evaluation and qualification of electrical insulation systems
Evaluation and qualification of electrical insulation systems
Bewertung und Kennzeichnung von elektrischen Isoliersystemen
Evaluation et qualification des systèmes d'isolation électrique
Ta slovenski standard je istoveten z: EN 60505:2000
ICS:
29.080.30 Izolacijski sistemi Insulation systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60505
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2000

ICS 29.080.30
English version
Evaluation and qualification of electrical insulation systems
(IEC 60505:1999)
Evaluation et qualification Bewertung und Kennzeichnung
des systèmes d'isolation électrique von elektrischen Isoliersystemen
(CEI 60505:1999) (IEC 60505:1999)

This European Standard was approved by CENELEC on 2000-01-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
CENELEC
© 2000 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

European Committee for Electrotechnical Standardization
Ref. No. EN 60505:2000 E
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Portugal, Spain, Sweden, Switzerland and United Kingdom.

Page 2
Foreword
The text of document 98/85/FDIS, future edition 2 of IEC 60505, prepared by IEC TC 98, Electrical
insulation systems (EIS), was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60505 on 2000-01-01.

The following dates were fixed:

– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2000-10-01

– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2003-01-01

Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative and annexes A and B are informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60505:1999 was approved by CENELEC as a European
Standard without any modification.

In the official version, for Bibliography, the following note has to be added for the standard indicated:

IEC 60085 NOTE: Harmonized as HD 566 S1:1990 (not modified).
__________
Page 3
Annex ZA (normative)
Normative references to international publications
with their corresponding European publications

This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when inco
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...