iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61858-1:2014/AC:2024-05

(Corrigendum)

Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS

Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS

Elektrische Isoliersysteme - Thermische Bewertung von Veränderungen an einem erprobten elektrischen Isoliersystem (EIS) - Teil 1: EIS mit Runddraht-Wicklungen

Systèmes d'isolation électrique - Évaluation thermique des modifications apportées à un système d’isolation électrique (SIE) éprouvé - Partie 1: Système d’isolation électrique à enroulements à fils

Sistemi električne izolacije - Toplotno vrednotenje sprememb preverjenega sistema električne izolacije (EIS) - 1. del: Žično navitje EIS - Popravek AC

General Information

Status
Published
Publication Date
09-May-2024
ICS
29.080.30 - Insulation systems
Technical Committee
CLC/SR 112 - Evaluation and qualification of electrical insulating materials and systems (to be defined)
Current Stage
6060 - Document made available - Publishing
Start Date
10-May-2024
Completion Date
10-May-2024
Ref Project
SIST EN 61858-1:2014/AC:2024 - Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS

Relations

Corrects
EN 61858-1:2014 - Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS
Effective Date
27-Feb-2024

Buy Standard

EN 61858-1:2014/AC:2024EN 61858-1:2014/AC:2024
PreviousNext
Corrigendum
EN 61858-1:2014/AC:2024
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2024
Sistemi električne izolacije - Toplotno vrednotenje sprememb preverjenega
sistema električne izolacije (EIS) - 1. del: Žično navitje EIS - Popravek AC
Electrical insulation systems - Thermal evaluation of modifications to an established
electrical insulation system (EIS) - Part 1: Wire-wound winding EIS
Elektrische Isoliersysteme - Thermische Bewertung von Veränderungen an einem
erprobten elektrischen Isoliersystem (EIS) - Teil 1: EIS mit Runddraht-Wicklungen
Systèmes d'isolation électrique - Évaluation thermique des modifications apportées à un
système d’isolation électrique (SIE) éprouvé - Partie 1: Système d’isolation électrique à
enroulements à fils
Ta slovenski standard je istoveten z: EN 61858-1:2014/AC:2024-05
ICS:
29.080.30 Izolacijski sistemi Insulat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61857-32:2019(Main)
Electrical insulation systems - Procedures for thermal evaluation - Part 32: Multifactor evaluation with increased factors during diagnostic testing
SIST EN IEC 61857-32:2020

IEC 61857-32:2019 series is focused on applications where other possible factors need to be incorporated to evaluate any influence on the performance of the electrical insulation system (EIS). Multi-factor evaluation is the most complex type of project to design and conduct. Clear guidelines are needed to give the user of this document a uniform approach and a method to analyse the test results. This document is for applications where the stresses are some combination of other factors of influence identified in IEC 60505. The multi-factor stresses are applied during the diagnostic portion of each test cycle. A few examples of other factors of influence or multi-factor stresses are: – high vibration; – submersion in oils, water, or solutions; – voltage higher than the test voltage of the reference EIS; – decreased cold shock temperature.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61857-31:2017(Main)
Electrical insulation systems - Procedures for thermal evaluation - Part 31: Applications with a designed life of 5 000 h or less
SIST EN 61857-31:2017

IEC 61857-31:2017(E) establishes an EIS evaluation for applications with a designed life of 5 000 h or less. This test method follows the procedures of IEC 60505 and is modified based on the range of designed life.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60505:2011/AC:2017-03(Corrigendum)
Evaluation and qualification of electrical insulation systems
SIST EN 60505:2011/AC:2017

IEC corrigendum

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61858-1:2014(Main)
Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS
SIST EN 61858-1:2014

IEC 61858-1:2014 lists the required test procedures for qualification of modifications of an established electrical insulation system (EIS) with respect to its thermal classification. This standard is applicable to EIS used in wire-wound winding electrotechnical devices. The test procedures are comparative in that the performance of a candidate EIS is compared to that of a reference EIS, which has proven service experience in accordance with IEC 60505 or has been evaluated by one of the procedures given in the IEC 61857 series. This first edition of IEC 61858-1 cancels and replaces the third edition of IEC 61858, published in 2008. It constitutes a technical and editorial revision. This edition includes the following significant technical changes with respect to the previous edition: a) this part is specifically for wire-wound winding EIS; b) new figures and charts support the contents.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61858-2:2014(Main)
Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 2: Form-wound EIS
SIST EN 61858-2:2014

IEC 61858-2:2014 lists the required test procedures for qualification of modifications of an established electrical insulation system (EIS) with respect to its thermal classification. This standard is applicable to EIS used in form-wound electrotechnical devices. The test procedures are comparative in that the performance of a candidate EIS is compared to that of a reference EIS, which has proven service experience in accordance with IEC 60505 or has been evaluated by one of the procedures given in IEC 60085 and IEC 60034-18-31.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62068:2013(Main)
Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses
SIST EN 62068:2014

IEC 62068:2013 applies to electrical equipment, regardless of voltage, containing an insulation system, which is: - connected to an electronic power supply, and - requires an evaluation of insulation endurance under repetitive voltage impulses. This standard proposes a general test procedure to facilitate screening of electrical insulating materials (EIM) and systems (EIS) and to achieve a relative evaluation of insulation endurance under conditions of repetitive impulses. This first edition of IEC 62068 replaces IEC 62068-1:2003. It has been re-numbered as IEC 62068, as decided at the Plenary Meeting of TC 112 in Prague 2011. The main changes with regard to IEC 62068-1:2003 concern the terms and definitions which are now aligned, in part, on IEC/TS 61934 and IEC/TS 60034-18-42.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60505:2011(Main)
Evaluation and qualification of electrical insulation systems
SIST EN 60505:2011

IEC 60505:2011 establishes the basis for estimating the ageing of electrical insulation systems (EIS) under conditions of either electrical, thermal, mechanical, environmental stresses or combinations of these (multifactor stresses). It specifies the principles and procedures that shall be followed, during the development of EIS functional test and evaluation procedures, to establish the estimated service life for a specific EIS. This standard should be used by all IEC technical committees responsible for equipment having an EIS. The main change with respect to the previous edition is that Annex A: Glossary is now available in an Internet version as well as a hardcopy version. The internet version contains an abridged text version and a multimedia supplement.

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61857-21:2009(Main)
Electrical insulation systems - Procedures for thermal evaluation - Part 21: Specific requirements for general-purpose models - Wire-wound applications
SIST EN 61857-21:2009

IEC 61857-21:2009 describes a general-purpose model (GPM) and a tall channel alternative model (GPM-TC) which can be used for the evaluation of wire-wound electrical insulation systems (EIS) where specific electrotechnical products are not available or required. The third edition cancels and replaces the second edition published in 2004, and constitutes editorial revisions to make this standard compatible with Parts 1 and 22.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61857-1:2009(Main)
Electrical insulation systems - Procedures for thermal evaluation - Part 1: General requirements - Low-voltage
SIST EN 61857-1:2009

IEC 61857-1:2008 specifies a general test procedure for the thermal evaluation and qualification of electrical insulation systems (EIS) and establishes a procedure that compares the performance of a candidate EIS to that of a reference EIS. This standard is applicable to existing or proposed EIS used in electrotechnical products with an input voltage of up to 1 000 V where the thermal factor is the dominating ageing factor. This third edition cancels and replaces the second edition published in 2004, and constitutes editorial revisions to make this standard compatible with Parts 21 and 22.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61857-22:2008(Main)
Electrical insulation systems - Procedures for thermal evaluation - Part 22: Specific requirements for encapsulated-coil model - Wire-wound electrical insulation system (EIS)
SIST EN 61857-22:2008

IEC 61857-22:2008 provides a general-purpose procedure for the evaluation of wire-wound systems using a general purpose encapsulated-coil model (ECM) where the application is unknown. This second edition cancels and replaces the first edition published in 2002, and constitutes editorial revisions to make this standard compatible with Parts 1 and 21.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day