EN 62002-2:2008

SLOVENSKI STANDARD
01-november-2008
1DGRPHãþD
SIST EN 62002-2:2007
Dostop do mobilnega in prenosnega DVB-T/H radia - 2. del: Preskušanje
skladnosti vmesnika (IEC 62002-2:2008)
Mobile and portable DVB-T/H radio access - Part 2: Interface conformance testing (IEC
62002-2:2008)
Mobiler und tragbarer Funkzugang zu DVB-T/H - Teil 2: Konformitätsprüfung der
Schnittstelle (IEC 62002-2:2008)
Accès radio DVB-T/H vers les mobiles et les portables - Partie 2: Contrôles de
conformité de l'interface (CEI 62002-2:2008)
Ta slovenski standard je istoveten z: EN 62002-2:2008
ICS:
33.170 Televizijska in radijska Television and radio
difuzija broadcasting
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62002-2
NORME EUROPÉENNE
August 2008
EUROPÄISCHE NORM
ICS 33.170 Supersedes EN 62002-2:2006

English version
Mobile and portable DVB-T/H radio access -
Part 2: Interface conformance testing
(IEC 62002-2:2008)
Accès radio DVB-T/H  Mobiler und tragbarer Funkzugang
vers les mobiles et les portables - zu DVB-T/H -
Partie 2: Contrôles de conformité Teil 2: Konformitätsprüfung
de l'interface der Schnittstelle
(CEI 62002-2:2008) (IEC 62002-2:2008)

This European Standard was approved by CENELEC on 2008-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in two official versions (English and German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62002-2:2008 E
Foreword
The text of document 100/1290/CDV, future edition 2 of IEC 62002-2, prepared by IEC TC 100, Audio,
video and multimedia systems and equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 62002-2 on 2008-06-01.
This European Standard supersedes EN 62002-2:2006.
The main changes with respect to EN 62002-2:2006 are listed below:
– DVB-H has been included as a part of the main specification;
– all the performance figures have been revised as new simulation results have been made available as
well as new reference receivers for DVB-H have been developed;
– DVB-H now includes all the different MPE-FEC code rates;
– new portable indoor and portable outdoor channel models have been included as well as performance
figures for those;
– a new 2x TU-6 mobile SFN test channel has been included;
– a new L4 linearity pattern has been added;
– dedicated performance figures for DVB-H for S1, S2, L1 to L4 interference patterns have been
included;
– new GSM-interference measurement method has been added.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62002-2:2008 was approved by CENELEC as a European
Standard without any modification.
__________
– 3 – EN 62002-2:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

- - Digital Video Broadcasting (DVB): Framing ETSI EN 300 744 2007
structure, channel coding and modulation for
digital terrestrial television

1) 2)
IEC 62002-1 - Mobile and portable DVB-T/H radio access - EN 62002-1 2008
Part 1: Interface specification

1)
ITU-R BT.1701-1 - Charactistics of radiated signals of - -
conventional analogue television systems

1)
Undated reference.
2)
Valid edition at date of issue.

IEC 62002-2
Edition 2.0 2008-05
INTERNATIONAL
STANDARD
Mobile and portable DVB-T/H radio access –
Part 2: Interface conformance testing

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
X
ICS 33.170 ISBN 2-8318-9749-1
– 2 – 62002-2 © IEC:2008(E)
CONTENTS
FOREWORD.6
1 Scope.8
2 Normative references .8
3 Abbreviations .8
4 Test conditions .10
4.1 General test conditions.10
4.1.1 General .10
4.1.2 Temperature.10
4.1.3 Voltage.11
4.2 Terminal categories and summarized measurement conditions .11
4.3 Required equipment .12
4.4 Reference model and test point .12
4.5 Degradation criteria and resynchronization.13
4.6 Definition of C/N .15
4.7 Definition of measurement signals.15
4.7.1 Wanted DVB-T/H signal and interfering DVB-T signal definition.15
4.7.2 Interfering signal definitions.16
5 C/N performance .18
5.1 Definition and applicability.18
5.2 Minimum requirements .18
5.2.1 C/N performance in Gaussian channel .18
5.2.2 C/N performance in portable channel .19
5.2.3 C/N performance in portable indoor (PI) and portable outdoor (PO)
channels.19
5.2.4 C/N performance in mobile channels.20
5.3 Test purpose .21
5.4 Method of test .22
5.4.1 Initial conditions .22
5.4.2 Measurement setup .22
5.4.3 Procedure.23
5.5 Test requirement .23
6 Receiver minimum and maximum input signal levels.24
6.1 Definition and applicability.24
6.2 Minimum requirements .24
6.2.1 Minimum input levels .24
6.2.2 Maximum input levels for wanted signals .24
6.3 Test purpose .24
6.4 Method of test .24
6.4.1 Initial conditions .24
6.4.2 Measurement setup .25
6.4.3 Procedure.25
6.5 Test requirement .25
7 Immunity to analogue and/or digital signals in other channels.26
7.1 Definition and applicability.26
7.2 Minimum requirements .26
7.2.1 Immunity to pattern S1 .26

62002-2 © IEC:2008(E) – 3 –
7.2.2 Immunity to pattern S2 .27
7.2.3 Immunity to pattern L1.27
7.2.4 Immunity to pattern L2.28
7.2.5 Immunity to pattern L3.28
7.2.6 Immunity to pattern L4.29
7.3 Test purpose .30
7.4 Method of test .30
7.4.1 Initial conditions .30
7.4.2 Measurement setup .34
7.4.3 Procedure.35
7.5 Test requirement .35
8 Immunity to co-channel interference from analogue TV signals.35
8.1 Definition and applicability.35
8.2 Minimum requirements .35
8.3 Test purpose .36
8.4 Method of test .36
8.4.1 Initial conditions .36
8.4.2 Measurement setup .36
8.4.3 Procedure.37
8.5 Test requirement .37
9 Guard interval utilization: echoes within guard interval .37
9.1 Definition and applicability.37
9.2 Minimum requirements .37
9.3 Test purpose .37
9.4 Method of test .37
9.4.1 Initial conditions .37
9.4.2 Measurement setup .38
9.4.3 Procedure.38
9.5 Test requirement .39
10 Guard interval utilization: echoes outside the guard interval .39
10.1 Definition and applicability.39
10.2 Minimum requirements .39
10.3 Test purpose .40
10.4 Method of test .40
10.4.1 Initial conditions .40
10.4.2 Measurement setup .40
10.4.3 Procedure.41
10.5 Test requirement .41
11 Tolerance to impulse interference.41
11.1 Definition and applicability.41
11.2 Minimum requirements .41
11.3 Test purpose .42
11.4 Method of test .42
11.4.1 Initial conditions .42
11.4.2 Measurement setup .42
11.4.3 Procedure.43
11.5 Test requirement .43
12 GSM900 TX signal blocking test .43

– 4 – 62002-2 © IEC:2008(E)
12.1 Definition and applicability.43
12.2 Minimum requirements .44
12.2.1 Minimum input levels .44
12.3 Test purpose .44
12.4 Method of test .44
12.4.1 Initial conditions .44
12.4.2 Measurement setup .44
12.4.3 Procedure.45
12.5 Test requirements .45
13 Mobile SFN channel test.45
13.1 Definition and applicability.45
13.2 Minimum requirements .45
13.3 Test purpose .47
13.4 Method of test .47
13.4.1 Initial conditions .47
13.4.2 Measurement setup .47
13.4.3 Procedure.47
13.5 Test requirements .48
Bibliography.49

Figure 1 – Reference model.13
Figure 2 – DVB-H measurement stream.15
Figure 3 – PAL interfering signals .17
Figure 4 – SECAM L interfering signal .17
Figure 5 – Example of a possible measurement setup in C/N performance tests .22
Figure 6 – Example of a possible measurement setup in minimum and maximum
receiver signal input level tests .25
Figure 7 – Pattern S1: wanted DVB-T/H channel with N+1 or N–1 analogue interferer.30
Figure 8 – Pattern S2: wanted DVB-T/H channel with N + 1 or N – 1 digital DVB-T
interferer.31
Figure 9 – Pattern L1: wanted DVB-T/H channel with one analogue signal on N + 4
channel and one digital DVB-T signal on N + 2 channel .32
Figure 10 – Pattern L2: wanted DVB-T/H channel with one analogue signal on N + 4
channel and another analogue signal on N + 2 channel.32
Figure 11 – Pattern L3: Wanted DVB-T/H signal with one digital DVB-T signal on N + 4
channel and another digital DVB-T signal on N + 2 channel .33
Figure 12 – Pattern L4: Wanted DVB-T/H signal with one analogue signal in C4/VHF III
and one DVB-T signal in C21/UHF.34
Figure 13 – Example of a possible measurement setup to test the immunity to
analogue and/or to digital signals in other channels .34
Figure 14 – Example of a possible measurement setup to test the immunity to co-
channel interference from analogue TV signals.36
Figure 15 – Example of possible measurement setup to test echoes within the guard
interval .38
Figure 16 – Echo outside guard interval mask.39
Figure 17 – Example of a possible measurement setup to test echoes outside guard
interval .40
Figure 18 – Definition of the impulse interference test pattern.42

62002-2 © IEC:2008(E) – 5 –
Figure 19 – Example of a measurement setup to test impulse noise interference .43
Figure 20 – Example of a measurement setup to test GSM900 TX signal blocking .44
Figure 21 – Example of a measurement setup in mobile SFN test.47

Table 1 – Valid conformance measurements for different terminal categories .11
Table 2 – Delta values between picture failure point and reference BER.14
Table 3 – DVB-H measurement streams .16
Table 4 – C/N (dB) in Gaussian channel.18
Table 5 – DVB-H C/N (dB) for 5 % MFER in Gaussian channel.18
Table 6 – C/N (dB) in portable channel.19
Table 7 – C/N (dB) for 5 % MFER in portable channel .19
Table 8 – C/N (dB) for 5 % ESR in PI & PO channel.19
Table 9 – C/N (dB) for 5 % MFER in PI & PO channel.20
Table 10 – C/N (dB) for 5 % ESR in typical urban channel .20
Table 11 – C/N (dB) for MFER 5 % for DVB-H .21
Table 12 – Immunity to pattern S1 .26
Table 13 – Immunity to pattern S1 for DVB-H.26
Table 14 – Immunity to pattern S2 .27
Table 15 – Immunity to pattern S2 for DVB-H.27
Table 16 – Immunity to pattern L1.28
Table 17 – Immunity to pattern L1 for DVB-H .28
Table 18 – Immunity to pattern L2.28
Table 19 – Immunity to pattern L2 for DVB-H .28
Table 20 – Immunity to pattern L3.29
Table 21 – Immunity to pattern L3 for DVB-H .29
Table 22 – Signal levels for pattern L4.29
Table 23 – Immunity to pattern L4.29
Table 24 – Immunity to pattern L4 for DVB-H .29
Table 25 – Immunity to analogue co-channel .35
Table 26 – Immunity to co-channel interference from analogue signals for DVB-H .36
Table 27 – Performance with echoes within the guard interval .37
Table 28 – Paths in echoes within guard interval measurement .38
Table 29 – Delay of the corner point Tc.39
Table 30 – Definition of the value Δ .39
Table 31 – Definition of the inflection point .40
Table 32 – Measurement conditions, modes and requirements used for impulse noise .41
Table 33 – C/N (dB) for MFER 5 % for DVB-H .45
Table 34 – Mobile SFN-channel for weak long echo.46
Table 35 – Mobile SFN-channel for strong long echo .46
Table 36 – Mobile SFN-channel for strong short echo .47

– 6 – 62002-2 © IEC:2008(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MOBILE AND PORTABLE DVB-T/H RADIO ACCESS –

Part 2: Interface conformance testing

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62002-2 has been prepared by technical area 1: Terminals for
audio, video and data services and content, of IEC technical committee 100: Audio, video and
multimedia systems and equipment.
This second edition cancels and replaces the first edition, published in 2005 and constitutes a
technical revision.
The main changes with respect to the previous edition are listed below.
• DVB-H has been included as a part of the main specification.
• All the performance figures have been revised as new simulation results have been made
available as well as new reference receivers for DVB-H have been developed.
• DVB-H now includes all the different MPE-FEC code rates.
• New portable indoor and portable outdoor channel models have been included as well as
performance figures for those.
• A new 2x TU-6 mobile SFN test channel has been included.

62002-2 © IEC:2008(E) – 7 –
• A new L4 linearity pattern has been added.
• Dedicated performance figures for DVB-H for S1, S2, L1 to L4 interference patterns have
been included.
• A new GSM-interference measurement method has been added.
The text of this standard is based on the following documents:
CDV Report on voting
100/1290/CDV 100/1381/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 62002 series, under the general title Mobile and portable DVB-T/H
radio access, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

– 8 – 62002-2 © IEC:2008(E)
MOBILE AND PORTABLE DVB-T/H RADIO ACCESS –

Part 2: Interface conformance testing

1 Scope
This part of IEC 62002 provides the conformance testing rules and guidelines for equipment
built to meet the Mobile and portable DVB-T/H radio access interface specification
(IEC 62002-1).
One aim is to limit the number of tests to a practical level. Nevertheless, the manufacturer is
responsible of guaranteeing that the terminal fulfils all aspects of the mobile and portable
DVB-T/H radio access interface specification (see IEC 62002-1).
2 Normative references
The following references are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the
referenced document (including any amendments) applies.
IEC 62002-1, Mobile and portable DVB-T/H radio access – Part 1: Interface specification
ETSI EN 300 744:2007, Digital Video Broadcasting (DVB) – Framing structure, channel
coding and modulation for digital terrestrial television, V1.5.2
ITU-R BT.1701-1, Characteristics of radiated signals of conventional analogue television
systems
3 Abbreviations
For the purposes of part of IEC 62002, the following abbreviations apply.
λ Lambda, wavelength (λ = c/f)
A2 German analogue TV-stereo system
A Coupling between antennas
A
AGC Automatic Gain Control
A
Stop band attenuation of the GSM reject filter
GSM
B Bandwidth
BER Bit Error Ratio
C Carrier power (In band carrier power including any echoes)
c
Speed of light c = 3,0 × 10 m/s
C Power contribution from the i-th signal
i
C Total useful carrier power
t
C/N
Carrier to Noise ratio
C/N Minimum C/N
min
CPE Common Phase Error
CR Code rate
dB Decibel
62002-2 © IEC:2008(E) – 9 –
dBc dB compared to carrier power C
dBd Antenna gain in dB compared to reference dipole (0 dBd = –2,14 dBi)
dBi Antenna gain in dB compared to isotropic antenna (0 dBi = 2,14 dBd)
dB(mW) Power in dB compared to 1 mW
DUT Device Under Test
DVB, DVB-T Digital Video Broadcasting, Terrestrial Digital Video Broadcasting
DVB-H Digital Video Broadcasting to hand-held terminals
DVB-RCT DVB Terrestrial Return Channel
E Field strength V/m
E(dBμV/m) Field strength in dB compared to 1 μV
EDGE Enhanced Data rates for GSM/Global Evolution
EMC Electromagnetic Compatibility
END Equivalent Noise Degradation
ENF Equivalent Noise Floor
ESR Erroneous Second Ratio
f
Frequency in Hz
f (MHz) Frequency in MHz
fc Centre frequency
F Noise factor
fd, Fd Doppler Frequency
Doppler Frequency with minimum C/N requirement raised by 3 dB
Fd
3dB
FER Frame Error Rate
G Gain
Ga Antenna gain
GI Guard Interval
GPRS General Packet Radio Service
GSM Global System for Mobile communications
I Interfering power
ICI Intercarrier Interference
J joule
-26
k Boltzmann’s constant k = 1,38 x 10 J/K
K kelvin
L1, L2, L3, L4 Linearity patterns
L Insertion loss of the GSM reject filter
GSM
LNA Low Noise Amplifier
MER
Modulation Error Ratio
MFER MPE-FEC Frame Error Rate
MHz Megahertz
MPE-FEC Multi Protocol Encapsulation Forward Error Correction
MPEG-2 Motion Pictures Expert Group, Video compression standard
n, m, N
Channel indexes
NF Noise figure in dB
NICAM Additional sound carrier for analogue TV, modulated with a Near Instantaneous
Companded Audio Multiplex.
PA Power Amplifier
PAL, PAL B, PAL G, PAL Phase Alternation Line, TV-systems using PAL
I, PAL I1
– 10 – 62002-2 © IEC:2008(E)
PER Packet Error Ratio
PFP Picture Failure Point
P Input power W
in
P (dB(mW))
Input power dB compared to 1 mW
in
P Maximum power
max
ppm Parts per million
PSI/SI Program Specific Information, Service Information
P Transmission power
TX
P Excess noise Power dBc
x
QAM16, QAM64 Quadrature Amplitude Modulation, 16-level and 64-level versions
QEF Quasi Error Free
QoS Quality of Service
QPSK Quaternary Phase Shift Keying
RF Radio Frequency
RS Reed Solomon
Rx Receiver
S1,S2 Selectivity Patterns
SECAM, SECAM L Sequential á mémoire, TV-system using SECAM
SFN Single Frequency Network
SFP Subjective Failure Point
T Temperature in kelvin
Tc Corner point
Te Total duration of the gating pulses
ti Time of arrival for the i-th signal
TS Transport Stream
Tg Guard Interval duration
Tu Active symbol duration
Tx Transmitter
UHF Ultra High Frequency
UMTS Universal Mobile Telecommunications System
VHF Very High Frequency
W watt
WCDMA Wide-band Code Division Multiple Access
Wi Weighting coefficient for the i-th component
4 Test conditions
4.1 General test conditions
4.1.1 General
The general test conditions are set out below. Manufacturers should note that the actual
conditions of use could be more stringent.
4.1.2 Temperature
The terminal shall be tested in the normal laboratory conditions defined below:
+15 °C to + 35 °C For normal conditions (with relative humidity of 25 % to 75 %)

62002-2 © IEC:2008(E) – 11 –
4.1.3 Voltage
All tests are performed under nominal operating voltage as defined by the manufacturer.
4.2 Terminal categories and summarized measurement conditions
Table 1 shows which conformance measurements are performed with different terminal
categories and provides a summary of the measurement conditions.
Table 1 – Valid conformance measurements for different terminal categories
Terminal category Terminal Terminal Terminal
Clause Conditions a category b1 category b2 Category c
hand-held
car terminals portable TVs pocketable TVs
convergence
terminals
Ch 45
Gaussian All modulations, 2k/4k/8k
Portable All modulations, 2k/4k/8k
5 C/N
QPSK 1/2, 2/3,
performance
16-QAM 1/2,
16-QAM 2/3, 3/4, 64-QAM 2/3, GI 1/4, 8k
PI / PO
2/3, MPE-FEC
3/4, GI 1/4, 8k
QPSK 1/2, 2/3, 16-
QPSK 1/2, 2/3
QAM 1/2, 2/3, 64-
16-QAM 1/2,
Mobile - -
QAM 2/3
2/3, MPE-FEC
3/4, GI 1/4, 8k
GI 1/4, 8k
6 Receiver Minimum
Ch 21, 45, 64 (UHF), Ch 8, 12 (VHF)
minimum and and
maximum input maximum
QPSK 1/2
signal levels input levels
N ± 1: Ch 45 (UHF), Ch 8 (VHF) with 64-QAM 2/3 additionally Ch 21, 64 (UHF),
Ch 5, 12 (VHF). N ± 2: Ch 45 (UHF), Ch 8 (VHF)
S1
16-QAM 3/4 , 16-QAM 2/3, 16-QAM 1/2 , 64-QAM 3/4 , 64-QAM 2/3 GI 1/8
Ch 45 (UHF), Ch 8 (VHF)
S2
QPSK 1/2, 2/3, 16-QAM 1/2, 2/3, 3/4, 64-QAM 2/3, 3/4, GI 1/8
7 Immunity to
analogue
Ch 21,45,64 (UHF) Ch 8 (VHF)
and/or digital
signals in
16-QAM 1/2, 2/3, 16-QAM 1/2, 2/3, 16-QAM 1/2, 2/3, QPSK 1/2, 2/3,
L1-L3
other channels
3/4, 64-QAM 2/3, 3/4, 64-QAM 2/3, 3/4, 64-QAM 2/3, 16-QAM 1/2, 2/3,
GI 1/8, 8k GI 1/8, 8k GI 1/8, 8k GI 1/8, 8k
Ch 43
QPSK 1/2, 2/3, QPSK 1/2, 2/3, QPSK 1/2, 2/3, QPSK 1/2, 2/3,
L4
16-QAM 1/2, 2/3, 16-QAM 1/2, 2/3, 16-QAM 1/2, 2/3, 16-QAM 1/2, 2/3,
GI 1/8, 8k GI 1/8, 8k GI 1/8, 8k GI 1/8, 8k
Ch 45 (UHF)
8 Immunity to
co-channel
interference
QPSK 1/2, 2/3,
16-QAM 1/2, 2/3,
from analogue
16-QAM 1/2, 2/3,
3/4, 64-QAM 2/3,
TV signals
MPE-FEC 3/4, GI
3/4, GI 1/8
1/4, 8k
9 Guard
Ch 45 (UHF)
interval
utilization:
echoes within
8k, 64-QAM 2/3, GI 1/8
guard interval
8k, 16-QAM 1/2, GI 1/8
– 12 – 62002-2 © IEC:2008(E)
Terminal category Terminal Terminal Terminal
Clause Conditions a category b1 category b2 Category c
hand-held
car terminals portable TVs pocketable TVs
convergence
terminals
10 Guard
Ch 45 (UHF)
interval
utilization:
echoes outside
8k, 64-QAM 2/3, GI 1/8
the guard
8k, 16-QAM 1/2, GI 1/8
interval
8k, 16-QAM 2/3, GI 1/8
Ch 45 (UHF)
11 Tolerance
to impulse
8k, 64-QAM 2/3, GI 1/8, 8k
interference
8k, 16-QAM 1/2, GI 1/8, 8k
8k, 16-QAM 2/3, GI 1/8, 8k
12 GSM900 TX 8k, GI 1/4, QPSK
signal blocking   1/2CR MPE-FEC
test 3/4, C55
8k, GI 1/4, 16-
13 Mobile SFN
QAM 1/2 MPE-
channel test
FEC 3/4, C45
4.3 Required equipment
The following list gives an overview of the measurement equipment required for the entire set
of conformance testing. Capabilities and features of the actual equipment may vary and there
could be alternative ways of performing the measurements. Therefore no detailed instructions
for various measurements are given and the list of the required equipment is an example.
• 3 DVB-T/H signal sources;
• Wideband noise source;
• 2 PAL/SECAM analogue TV-signal sources;
• Spectrum analyser;
• Channel simulator;
• RF-power meter;
• Impulse noise source;
• MPEG-2 source;
• MPEG-2 decoder;
• DVB-H IP encapsulator;
• MPEG-2 TS player;
• Step attenuators, power dividers, cables and other standard RF-measurement accessories.
4.4 Reference model and test point
The receiver performance is defined according to the reference model shown in Figure 1.

62002-2 © IEC:2008(E) – 13 –
Field
strength
Antenna
Optional external
E
gain antenna connector
G
a
Only in DVB -H receiver
Noise
IP-out
factor
DVB-H DVB-H DVB - H
F DVB-T
time MPE- IP - De -
demodulator
slicing FEC encapsulation
Input
Optional
power
GSM
P
in
reject
RF - reference
filter
point
TS-reference
IP - reference
L
point
GSM point
FER- MFER -
reference reference
point point
IEC  653/08
Figure 1 – Reference model
The receiver performance figures are all specified at the reference point, which is the input of
the receiver. All conformance testing is performed at the same point.
In the case where the GSM rejection filter is included (terminal category c), the measurements
will be carried out in the front of the GSM rejection filter.
In the case of a DVB-H receiver, the manufacturer shall provide the specified test mode in
which the following parameters can be monitored:
• TS-BER after Viterbi decoder,
• TS-PER,
• MPE FER (FER) (Frame Error Rate before MPE-FEC),
• MPE-FEC FER (MFER) (Frame Error rate after MPE-FEC).
4.5 Degradation criteria and resynchronization
Four different degradation criteria are used. The criteria a and b are used in the non-mobile
cases for DVB-T. Criterion c is for mobile reception in DVB-T and criterion d for DVB-H
reception A receiver must be able to acquire a degraded signal and a resynchronization test
must be done to ensure the C/N or C/I value is valid. Once the degradation criterion is
achieved, all receiver input signals are removed for a period of 5 seconds and then re-applied.
The same degradation criterion must be achieved within a further 5 seconds. If that is not the
case, then the only degradation criterion that can be used for receiver measurement has to be
based upon successful signal acquisition.
−4
a) Reference BER, defined as BER = 2 × 10 after Viterbi decoding.
This corresponds to the quasi error free (QEF) criterion in the DVB-T standard, which
states: ”less than one uncorrected error event per hour”. In the stationary reception cases,
QEF is equivalent to the reference BER after Viterbi decoding.
b) Picture failure point (PFP).
The picture failure point is defined as the C/N or C/I value when picture errors become
visible. This is preferred if BER measurements are unstable or unavailable. A more
objective definition can be made using the ESR (5 % erroneous second ratio) criterion,
which allows one erroneous second within the 20 s observation period in the transport
stream. Note that the reception quality is poor at picture failure point as one possible error

– 14 – 62002-2 © IEC:2008(E)
in each 20 s interval is too much for fixed TV-reception. The criterion is
...