EN 60454-1:1994

SLOVENSKI STANDARD
01-junij-1998
Pressure-sensitive adhesive tapes for electrical purposes - Part 1: General
requirements (IEC 60454-1:1992)
Specifications for pressure-sensitive adhesive tapes for electrical purposes -- Part 1:
General requirements
Bestimmungen für selbstklebende Bänder für elektrotechnische Anwendungen -- Teil 1:
Allgemeine Anforderungen
Spécifications pour rubans adhésifs par pression à usages électriques -- Partie 1:
Prescriptions générales
Ta slovenski standard je istoveten z: EN 60454-1:1994
ICS:
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

NORME
CEI
INTERNATIONALE
IEC
454-1
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
1992-04
Spécifications pour rubans adhésifs par pression
à usages électriques
Partie 1:
Prescriptions générales
Specifications for pressure-sensitive adhesive
tapes for electrical purposes
Part 1:
General requirements
© CEI 1992 Droits de reproduction réservés — Copyright — all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized
utilisée sous quelque forme que ce soit et par aucun procédé, in any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission
microfilms, sans raccord écrit de réditeur. in writing from the publisher
Bureau central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève Suisse
Téléfax: +41 22 919 0300 e-mail: inma l (C^ i iec.ch IEC web site http://www.iec.ch
K
Commission Electrotechnique Internationale CODE PRIX
International Electrotechnical Commission PRICE CODE
IEC
MewiyHapoaHae 3neicrpoTexuwiecean HOMHCCHR
• Pour prix, voir catalogue en vigueur
For price, see current catalogue

454-1 ©IEC _ 3
CONTENTS
Page
FOREWORD 5
INTRODUCTION
Clause
1 Scope 9
2 Normative references 9
3 Definition 9
4 Classification and designation 9
5 Appearance
6 Freedom from defects 13
7 Dimensions 13
8 Minimum storage life
9 Packing
10 Marking
Tables
454-1C IEC - 5 -
INTERNATIONAL ELECTROTECHNICAL COMMISSION
SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES
FOR ELECTRICAL PURPOSES
Part 1: General requirements
FOREWORD
1) The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
2) They have the form of recommendations for international use and they are accepted by the National
Committees in that sense.
3) In order to promote international unification, the IEC expresses the wish that all National Committees
should adopt the text of the IEC recommendation for their national rules in so far as national conditions will
permit. Any divergence between the IEC recommendation and the corresponding national rules should, as
far as possible, be clearly indicated in the latter.
4) The IEC has not laid down any procedure concerning marking as an indication of approval and has no
responsibility when an item of equipment is declared to comply with one of its recommendations.
This pa rt of International Standard IEC 454 has been prepared by Sub-Committee 15C:
Specifications, of IEC Technical Committee No. 15: Insulating materials.
This second edition of IEC 454-1 replaces the first edition published in 1974.
The text of this pa rt is based on the following documents:
Report on Voting
DIS
15C(CO)278 15C(CO)304
Full information on the voting for the approval of this part can be found in the Voting
Repo rt indicated in the above table.

454-1 © IEC – 7 –
INTRODUCTION
of IEC 454 is one of a series which deals with the characteristics of
This pa rt
pressure-sensitive adhesive tapes for electrical purposes.
The series consists of three pa rts:
Part 1: General requirements (IEC 454-1).
Part 2: Methods of test (IEC 454-2).
rt 3: Specifications for individual materials (IEC 454-3).
Pa
454-1 © IEC - 9 -
SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES
FOR ELECTRICAL PURPOSES
Part 1: General requirements
1 Scope
rt
This pa of IEC 454 gives general requirements for pressure-sensitive adhesive tapes for
electrical purposes.
2 Normative references
The following normative documents contain provisions which, through reference in this
text, constitute provisions of this pa rt of IEC 454. At the time of publication, the editions
indicated were valid. All normative documents are subject to revision, and pa rties to
agreements based on this pa rt of IEC 454 are encouraged to investigate the possibility of
applying the most recent editions of the normative documents indicated below. Members
of IEC and ISO maintain registers of currently valid International Standards.
IEC 304: 1982, Standard colours for insulation for low-frequency cables and wires.
ISO 472: 1988, Plastics - Vocabulary.
3 Definition
For the purpose of this International Standard, the following definition applies:
3.1 pressure-sensitive adhesive tapes: Category of tapes coated on one or both faces
with a pressure-sensitive adhesive which is permanently tacky at room temperature. They
require no activation by water, solvent or heat to adhere to a variety of dissimilar surfaces
upon contact, using only light pressure.
4 Classification and designation
The tape shall be classified by:
a) form and nature of backing (base)
...