EN IEC 62149-4:2023/prA1:2024

SLOVENSKI STANDARD
01-december-2024
Aktivne komponente in naprave optičnih vlaken - Izvedbeni standardi - 4. del: 1300
nm oddajnikov in sprejemnikov optičnih vlaken za Gigabit Ethernet uporabo -
Dopolnilo A1
Amendment 1 - Fibre optic active components and devices - Performance standards -
Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
Amendement 1 - Composants et dispositifs actifs fibroniques - Normes de performance -
Partie 4: Émetteurs-récepteurs fibroniques de 1 300 nm pour application Gigabit
Ethernet
Ta slovenski standard je istoveten z: EN IEC 62149-4:2023/prA1:2024
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

86C/1946/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62149-4/AMD1 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-11-01 2025-01-24
SUPERSEDES DOCUMENTS:
86C/1931/CD, 86C/1943/CC
IEC SC 86C : FIBRE OPTIC SYSTEMS AND ACTIVE DEVICES
SECRETARIAT: SECRETARY:
United States of America Mr Fred Heismann
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):

ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Amendment 1 - Fibre optic active components and devices - Performance standards - Part 4: 1
300 nm fibre optic transceivers for Gigabit Ethernet application

PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it,
for any other purpose without permission in writing from IEC.

IEC 62149-4/AMD1 ED3 © IEC 2024 2 86C/1946/CDV
1 INTERNATIONAL ELECTROTECHNICAL COMMISSION
2 ____________
4 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
5 PERFORMANCE STANDARDS –
7 Part 4: 1 300 nm fibre optic transceivers
8 for Gigabit Ethernet application
10 Amendment 1
12 FOREWORD
13 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
14 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
15 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
16 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
17 Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
18 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
19 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
20 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
21 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
22 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
23 consensus of opinion on the relevant subjects since each technical committee has representation from all
24 interested IEC National Committees.
25 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
26 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
27 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
28 misinterpretation by any end user.
29 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
30 transparently to the maximum extent possible in their national and regional publications. Any divergence between
31 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
32 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
33 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
34 services carried out by independent certification bodies.
35 6) All users should ensure that they have the latest edition of this publication.
36 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
37 members of its technical committees and IEC National Committees for any personal injury, property damage or
38 other damage of any nature whatsoever, whether direct or indirect, o
...