EN 61850-7-4:2010/A1:2020

SLOVENSKI STANDARD
01-junij-2020
Komunikacijska omrežja in sistemi za avtomatizacijo porabe električne energije - 7
-4. del: Osnovna komunikacijska struktura - Združljivi logični vozliščni in
podatkovni razredi - Dopolnilo A1
Communication networks and systems for power utility automation - Part 7-4: Basic
communication structure - Compatible logical node classes and data object classes
Kommunikationsnetze und -systeme für die Automatisierung in der elektrischen
Energieversorgung - Teil 7-4: Grundlegende Kommunikationsstruktur - Kompatible
Logikknoten- und Datenklassen
Réseaux et systèmes de communication pour lautomatisation des systèmes électriques -
Partie 7-4: Structure de communication de base - Classes de nud logique et classes de
donnée objet compatibles
Ta slovenski standard je istoveten z: EN 61850-7-4:2010/A1:2020
ICS:
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
33.200 Daljinsko krmiljenje, daljinske Telecontrol. Telemetering
meritve (telemetrija)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61850-7-4:2010/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2020
ICS 33.200
English Version
Communication networks and systems for power utility
automation - Part 7-4: Basic communication structure -
Compatible logical node classes and data object classes
(IEC 61850-7-4:2010/A1:2020)
Réseaux et systèmes de communication pour Kommunikationsnetze und -systeme für die
l'automatisation des systèmes électriques- Partie 7-4: Automatisierung in der elektrischen Energieversorgung -
Structure de communication de base - Classes de nœuds Teil 7-4: Grundlegende Kommunikationsstruktur -
logiques et classes d'objets de données compatibles Kompatible Logikknoten- und Datenklassen
(IEC 61850-7-4:2010/A1:2020) (IEC 61850-7-4:2010/A1:2020)
This amendment A1 modifies the European Standard EN 61850-7-4:2010; it was approved by CENELEC on 2020-03-18. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61850-7-4:2010/A1:2020 E

European foreword
The text of document 57/2102A/FDIS, future IEC 61850-7-4/A1, prepared by IEC/TC 57 "Power
systems management and associated information exchange" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 61850-7-4:2010/A1:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-12-18
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-03-18
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61850-7-4:2010/A1:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61869-9:2016 NOTE Harmonized as EN IEC 61869-9:2019 (not modified)
IEC 62271-3:2015 NOTE Harmonized as EN 62271-3:2015 (not modified)

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Add the following references:
Publication Year Title EN/HD Year
IEC/IEEE 61850-9-3 - Communication networks and systems for - -
power utility automation - Part 9-3: Precision
time protocol profile for power utility
automation
IEC/IEEE 61850-9-3 2016 Communication networks and systems for - -
power utility automation - Part 9-3: Precision
time protocol profile for power utility
automation
IEC/IEEE 60255-118-1 2018 Measuring relays and protection equipment - - -
Part 118-1: Synchrophasor for power
systems - Measurements
IEC 60255-24 2013 Measuring relays and protection equipment - - -
Part 24: Common format for transient data
exchange (COMTRADE) for power systems

Delete the following reference:
Publication Year Title EN/HD Year
IEEE 1588 - Precision clock synchronization protocol for - -
networked measurement and control
systems
IEC 61850-7-4 ®
Edition 2.0 2020-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
A MENDMENT 1
AM ENDEMENT 1
Communication networks and systems for power utility automation –

Part 7-4: Basic communication structure – Compatible logical node classes and

data object classes
Réseaux et systèmes de communication pour l'automatisation des systèmes

électriques –
Partie 7-4: Structure de communication de base – Classes de noeuds logiques

et classes d'objets de données compatibles

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.200 ISBN 978-2-8322--7347-0

– 2 – IEC 61850-7-4:2010/AMD1:2020
 IEC 2020
FOREWORD
This amendment has been prepared by IEC technical committee 57: Power systems
management and associated information exchange.
The motivation and goal of the amendment is to improve consistency of the data model over
all application domains of IEC 61850. Data (Logical Nodes, Data Objects, Data Attributes)
with the same semantics shall have the same naming where this part of IEC 61850 refers to
Logical Nodes and Data Objects and IEC 61850-7-3 to the Data Attributes.
Therefore, the amendement complements and updates the second edition of this part of
IEC 61850, which was published in 2010. It constitutes editorial revisions for consistency and
technical corrections of bugs as far as interoperability is touched.
To reach this goal and to keep it for all future as common working source a comprehensive
back-office UML version was created and will be maintained for future standard development.
The published parts of IEC 61850such as IEC 61850-7-4, on which the amendment is based,
are generated automatically from the UML version. This allows publishing, voting and reading
the various parts of IEC 61850-7 as in the past.
This amendment includes the following changes with respect to IEC 61850-7-4:2010:
• provides clarifications and corrections to the second edition of IEC 61850-7-4, based on
the tissues = {671, 672, 674, 675, 676, 677, 679, 680, 682, 683, 685, 686, 689, 693, 694,
695, 696, 712, 713, 714, 715, 716, 724, 725, 732, 734, 735, 736, 742, 743, 744, 748, 749,
772, 773, 774, 775, 776, 800, 802, 808, 819, 830, 831, 835, 838, 842, 843, 844, 849, 871,
877, 878, 879, 881, 882, 902, 908, 909, 910, 911, 912, 913, 920, 928, 932, 933, 937, 939,
940, 952, 967, 991, 1007, 1029, 1044, 1046, 1071, 1075, 1076, 1077, 1081, 1086, 1117,
1119, 1128, 1137, 1139, 1176, 1177, 1190, 1191, 1203, 1205, 1229, 1235, 1236, 1244,
1250, 1256, 1258, 1259, 1261, 1269, 1273, 1278, 1282, 1292, 1294, 1310, 1316, 1330,
1331, 1333, 1339, 1347, 1348, 1364, 1368, 1375, 1380, 1390, 1404, 1411, 1420, 1423,
1425, 1426, 1456, 1568};
• adds to each functional LN group a parent abstract Logical node where the functional
nodes are children from (full object oriented model). Since all abstract LNs are in a
common clause, the relative position of the functional LNs is not changed within their
clause.
• adds new abbreviated terms
• has extension of the list of abbreviate terms to be used for object names
• has more precise combination rules for abbreviated terms to object names
• has extensions by new logical nodes mainly from power quality domains and others
• has corrections of editorial errors.
Clauses 4 through 8 and their subclauses (except for 5.1, 5.2, and 5.3) and XML
enumerations from Annex H are automatically generated from the UML model.
The structure of the document has been changed for the following reasons:
– To split the description of logical nodes preliminaries (Clause 5) from logical node
specification (Clause 6). Some content of this clause has been moved from the previous
description of logical nodes (was in IEC 61850-7-4:2007(revision A – 5.1 and 5.2).
– To include abstract logical nodes. These abstract logical nodes have been described in
6.2.
– The specification of logical nodes begins with 6.3 (was in IEC 61850-7-4:2007 (revision A
– 5.3). In consequence all clauses in IEC 61850-7-4:2007 (revision A beginning with 5.3
count one number higher (beginning with 6.3) than they were in IEC 61850-7-4
(revision A).
IEC 61850-7-4:2010/AMD1:2020 – 3 –
 IEC 2020
– The description of data object semantics and enumerations starts with Clause 7. A new
clause has been included to specify the enumerations used in IEC 61850-7-4 separately.
Annex J and Annex K have been added.
The text of this amendment is based on the following documents:
FDIS Report on voting
57/2102A/FDIS 57/2133/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The content of this part of IEC 61850 is based on existing or emerging standards and
applications. In particular the definitions are based upon:
• the specific data objects types defined in IEC 60870-5-101 and IEC 60870-5-103;
• the common class definitions from the Utility Communication Architecture 2.0: Generic
Object Models for Substation and Feeder Equipment (GOMSFE) (IEEE TR 1550);
• CIGRE Report 34-03, Communication requirements in terms of data flow within
substations, December 1996.
A list of all parts of the IEC 61850 series under the general title Communication networks and
systems for power utility automation, can be found on the IEC website.
This IEC standard includes Code Components i.e. components that are intended to be directly
processed by a computer. Such content is any text found between the markers BEGINS> and , or otherwise is clearly labeled in this standard as a Code
Component. In the current version of this document, such indication is made at the beginning
of each concerned top-level clauses
The purchase of this IEC standard carries a copyright license for the purchaser to sell
software containing Code Components from this standard directly to end users and to end
users via distributors, subject to IEC software licensing conditions, which can be found at:
http://www.iec.ch/CCv1.
If any updates are required to the published code component that needs to apply immediately
and can not wait for an amendment (i.e. fixing a major problem), a new release of the Code
Component will be issued and distributed through the IEC WebSite. Any new release of the
Code Component related to this part will supersede any previously published Code
Component including the one published within the current document.
This publication contains attached nsd files which compose the Code Component of this part.
These files are intended to be used as a complement and do not form an integral part of this
standard.
– 4 – IEC 61850-7-4:2010/AMD1:2020
 IEC 2020
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page o
...