EN 60068-3-8:2003

SLOVENSKI SIST EN 60068-3-8:2004

STANDARD
februar 2004
Environmental testing - Part 3-8: Supporting documentation and guidance -
Selecting amongst vibration tests (IEC 60068-3-8:2003)
ICS 19.040; 29.020 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 60068-3-8
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2003

ICS 19.040; 29.020
English version
Environmental testing
Part 3-8: Supporting documentation and guidance –
Selecting amongst vibration tests
(IEC 60068-3-8:2003)
Essais d'environnement Umweltprüfungen
Partie 3-8: Documentation Teil 3-8: Unterstützende Dokumentation
d'accompagnement et lignes directrices - und Leitfaden –
Sélection d'essais de vibrations Auswahl zwischen verschiedenen
(CEI 60068-3-8:2003) Schwingprüfverfahren
(IEC 60068-3-8:2003)
This European Standard was approved by CENELEC on 2003-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60068-3-8:2003 E
Foreword
The text of document 104/308/FDIS, future edition 1 of IEC 60068-3-8, prepared by IEC TC 104,
Environmental conditions, classification and methods of test, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 60068-3-8 on 2003-11-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-11-01

Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60068-3-8:2003 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60721-3-0 NOTE Harmonized as HD 478.3.0 S1:1987 (not modified).

__________
- 3 - EN 60068-3-8:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60068-1 - Environmental testing EN 60068-1 1994
Part 1: General and guidance
1) 2)
IEC 60068-2-6 - Part 2-6: Tests - Test Fc: Vibration EN 60068-2-6 1995
(sinusoidal)
1) 2)
IEC 60068-2-64 - Part 2-64: Test methods - Test Fh: EN 60068-2-64 1994
Vibration, broad-band random (digital
control) and guidance
3)
IEC 60068-2-80 - Part 2-80: Tests - Test Fi: Mixed mode - -

IEC 60721-3 Series Classification of environmental EN 60721-3 Series
conditions
Part 3: Classification of groups of
environmental parameters and their
severities
IEC 60721-4 Series Part 4: Guidance for the correlation and - -
transformation of environmental
condition classes of IEC 60721-3 to the
environmental tests of IEC 60068

IEC Guide 104 1997 The preparation of safety publications - -
and the use of basic safety publications
and group safety publications
1)
ISO 2041 - Vibration and shock - Vocabulary - -

1)
ISO 5348 - Mechanical vibration and shock - - -
Mechanical mounting of accelerometers

1)
Undated reference.
2)
Valid edition at date of issue.
3)
At draft stage.
NORME CEI
INTERNATIONALE IEC
60068-3-8
INTERNATIONAL
Première édition
STANDARD
First edition
2003-08
PUBLICATION FONDAMENTALE DE SÉCURITÉ
BASIC SAFETY PUBLICATION
Essais d'environnement –
Partie 3-8:
Documentation d'accompagnement
et lignes directrices –
Sélection d'essais de vibrations
Environmental testing –
Part 3-8:
Supporting documentation and guidance –
Selecting amongst vibration tests
 IEC 2003 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
y compris la photo-copie et les photocopying and microfilm, without permission in writing from
électronique ou mécanique,
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch  Web: www.iec.ch
CODE PRIX
S
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60068-3-8  IEC:2003 – 3 –
CONTENTS
FOREWORD.5
INTRODUCTION.9
1 Scope.11
2 Normative references .11
3 Terms and definitions .13
4 Description of vibration test methods .15
4.1 General .15
4.2 Test methods .15
4.3 Accelerated testing.19
5 Vibration environment of a specimen .19
5.1 General .19
5.2 Collecting information, preparing a decision .19
5.3 Definition of dynamic conditions .21
6 Estimation of ‘real life’ dynamic conditions for the specimen.21
6.1 General .21
6.2 Measurement of dynamic conditions.21
6.3 Data analysis .23
7 Selection of test method .31
7.1 General .31
7.2 Sine testing .33
7.3 Random testing .33
7.4 Mixed mode testing .35
8 Vibration response investigation of the specimen .35
8.1 General .35
8.2 Aims, purposes .37
8.3 Sinusoidal excitation .37
8.4 Random excitation.39
8.5 Problem investigation (troubleshooting).39
8.6 Survival pass/fail criterion .39
8.7 Information to be given in the relevant specification .43
Bibliography.45
Figure 1 – Probability density of a single frequency sinusoidal signal.27
Figure 2 – Probability density of a mixture of sine and random signals.27
Figure 3 – Autocorrelation functions for various signals .29
Table 1 – Examples of vibration environment and recommended test method .31
Table 2 – Recommended method for response investigation.43

60068-3-8  IEC:2003 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ENVIRONMENTAL TESTING –
Part 3-8: Supporting documentation and guidance –
Selecting amongst vibration tests
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to
technical committees; any IEC National Committee interested in the subject dealt with may participate in this
preparatory work. International, governmental and non-governmental organizations liaising with the IEC also
participate in this preparation. IEC collaborates closely with the International Organization for Standardization
(ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60068-3-8 has been prepared by IEC technical committee 104:
Environmental conditions, classification and methods of test.
The text of this standard is based on the following documents:
FDIS Report on voting
...