EN 61755-3-2:2009

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Optische Schnittstellen für Lichtwellenleiter-Steckverbinder - Teil 3-2: Optische Schnittstellen von Zirkonium-Stiften mit 2,5 mm und 1,25 mm Durchmesser für 8° angeschrägte Einmodenfasern mit physikalischem Kontakt (IEC 61755-3-2:2006 (MOD) + corrigendum Jan. 2009)Interfaces optiques de connecteurs pour fibres optiques - Partie 3-2: Interfaces optiques, férules PC en zircone plein cylindrique de diamètre 2,5 mm et 1,25 mm, pour fibres unimodales à angle PC de 8 degrés (CEI 61755-3-2:2006 (MOD) + corrigendum Jan. 2009)Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres (IEC 61755-3-2:2006 (MOD) + corrigendum Jan. 2009)33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 61755-3-2:2009SIST EN 61755-3-2:2009en,fr01-maj-2009SIST EN 61755-3-2:2009SLOVENSKI
STANDARD



SIST EN 61755-3-2:2009



EUROPEAN STANDARD EN 61755-3-2 NORME EUROPÉENNE
EUROPÄISCHE NORM February 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61755-3-2:2009 E
ICS 33.180.20
English version
Fibre optic connector optical interfaces -
Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter
cylindrical full zirconia ferrules
for 8 degrees angled-PC single mode fibres (IEC 61755-3-2:2006, modified + corrigendum 2009)
Interfaces optiques de connecteurs
pour fibres optiques -
Partie 3-2: Interfaces optiques,
férules PC en zircone plein cylindrique
de diamètre 2,5 mm et 1,25 mm,
pour fibres unimodales
à angle PC de 8 degrés (CEI 61755-3-2:2006, modifiée + corrigendum 2009)
Optische Schnittstellen
für Lichtwellenleiter-Steckverbinder -
Teil 3-2:Optische Schnittstellen
mit 8° abgeschrägten Zirkonium-Ferrulen mit 2,5 mm und 1,25 mm Durchmesser
für Einmodenfasern mit
physikalischem Kontakt (IEC 61755-3-2:2006, modifiziert + Corrigendum 2009)
This European Standard was approved by CENELEC on 2008-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 61755-3-2:2009



EN 61755-3-2:2009 - 2 - Foreword The text of the International Standard IEC 61755-3-2:2006, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, together with the common modifications prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic interconnect, passive and connectorised components, was submitted to the formal vote and was approved by CENELEC as EN 61755-3-2 on 2008-12-01. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2009-12-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2011-12-01 __________ Endorsement notice The text of the International Standard IEC 61755-3-2:2006 + corrigendum January 2009 was approved by CENELEC as a European Standard with agreed common modifications as given below. COMMON MODIFICATIONS Table 1 – Optical interface parameter values for 2,5 mm diameter ferrule In row C, replace the 3 maximum values ‘70’ with ‘50’ (µm). Table 2 – Optical interface parameter values for 1,25 mm diameter ferrule In row C, replace the 3 maximum values ‘70’ with ‘50’ (µm). Bibliography The following notes have to be added for the standards indicated: IEC 61753-1 NOTE
Harmonized as EN 61753-1:2007 (not modified). IEC 61755-2-2 NOTE
Harmonized as EN 61755-2-2:2006 (not modified). ___________ SIST EN 61755-3-2:2009



NORME INTERNATIONALECEIIEC INTERNATIONAL STANDARD 61755-3-2Première éditionFirst edition2006-07 Inter
...