iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60896-2:1996

(Main)

Stationary lead-acid batteries - General requirements and methods of test - Part 2: Valve regulated types

Stationary lead-acid batteries - General requirements and methods of test - Part 2: Valve regulated types

Applies to valve regulated stationary lead-acid cells and batteries for service in a fixed location (i.e. not habitually to be moved from place to place) and permanently connected to a load and to a.d.c. power supply.

Orstfeste Blei-Akkumulatoren - Allgemeine Anforderungen und Prüfungen - Teil 2: Wartungsfreie verschlossene Batterien

Batteries stationnaires au plomb - Prescriptions générales et méthodes d'essais - Partie 2: Batteries étanches à soupapes

S'applique aux éléments et batteries au plomb étanches à soupapes, destinés à une utilisation dans des installations fixes (c'est-à-dire qui, habituellement, ne sont pas destinés à être changées de place ) et connectés en permanence à une charge et à une source de courant continu.

Stacionarne svinčeno-kislinske baterije - Splošne zahteve in metode preskušanja - 2. del: Ventilsko regulirani tipi (IEC 60895-2:1995)

General Information

Status
Withdrawn
Publication Date
19-Feb-1996
Withdrawal Date
31-Oct-1996
ICS
29.220.20 - Acid secondary cells and batteries
Technical Committee
CLC/TC 21X - Secondary cells and batteries
Drafting Committee
IEC/TC 21 - IEC_TC_21
Parallel Committee
IEC/TC 21 - IEC_TC_21
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Mar-2007
Completion Date
01-Mar-2007
Ref Project
SIST EN 60896-2:1997 - Stationary lead-acid batteries - General requirements and methods of test -- Part 2: Valve regulated types

Relations

Replaced By
EN 60896-21:2004 - Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test
Effective Date
29-Jan-2023

Buy Standard

EN 60896-2:1997 - IEC pretisk WithdrawnEN 60896-2:1997 - IEC pretisk Withdrawn
PreviousNext
Standard
EN 60896-2:1997 - IEC pretisk Withdrawn
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
P EN 60896-2:1998P EN 60896-2:1998
PreviousNext
Standard – translation
P EN 60896-2:1998
Slovenian language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-1997
Stacionarne svinčeno-kislinske baterije - Splošne zahteve in metode preskušanja -
2. del: Ventilsko regulirani tipi (IEC 60895-2:1995)
Stationary lead-acid batteries - General requirements and methods of test -- Part 2:
Valve regulated types
Orstfeste Blei-Akkumulatoren - Allgemeine Anforderungen und Prüfungen -- Teil 2:
Wartungsfreie verschlossene Batterien
Batteries stationnaires au plomb - Prescriptions générales et méthodes d'essais -- Partie
2: Batteries étanches à soupapes
Ta slovenski standard je istoveten z: EN 60896-2:1996
ICS:
29.220.20 Kislinski sekundarni členi in Acid secondary cells and
baterije batteries
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIS
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 61427-2:2015/A1:2024(Amendment)
Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 2: On-grid applications
SIST EN IEC 61427-2:2016/fprA1
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62877-1:2023(Main)
Electrolyte and water for vented lead acid accumulators - Part 1: Requirements for electrolyte
SIST EN IEC 62877-1:2024

IEC 62877-1:2023 is available as IEC 62877-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62877-1:2023 applies to electrolytes and their components used for filling vented lead acid batteries with dry-charged cells and for electrolyte replenishment, replacement or electrolyte density adjustment of batteries in operation. This document defines the composition, purity and properties of electrolyte, for application where specific instructions from the battery manufacturer are not available. This second edition cancels and replaces the first edition published in 2016. This edition includes the following significant technical changes with respect to the previous edition: - Addition of the concentration values of halogens in Table 4.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62485-5:2021/AC:2022-07(Corrigendum)
Safety requirements for secondary batteries and battery installations - Part 5: Safe operation of stationary lithium ion batteries
SIST EN IEC 62485-5:2021/AC:2022

IEC Corrected version

  • Corrigendum
    4 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62660-3:2022(Main)
Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements
SIST EN IEC 62660-3:2022

This part of IEC 62660 specifies test procedures and acceptance criteria for safety performance of secondary lithium-ion cells and cell blocks used for propulsion of electric vehicles (EV) including battery electric vehicles (BEV) and hybrid electric vehicles (HEV). This document determines the basic safety performance of cells used in a battery pack and system under intended use and reasonably foreseeable misuse or incident, during the normal operation of the EV. The safety requirements of the cell in this document are based on the premise that the cells are properly used in a battery pack and system within the limits for voltage, current and temperature as specified by the cell manufacturer (cell operating region). The evaluation of the safety of cells during transport and storage is not covered by this document. NOTE 1 The safety performance requirements for lithium-ion battery packs and systems are defined in ISO 6469‑1. The specifications and safety requirements for lithium-ion battery packs and systems of electrically propelled mopeds and motorcycles are defined in ISO 18243. IEC 62619 covers the safety requirements for the lithium-ion cells and batteries for industrial applications, including, for example, forklift trucks, golf carts, and automated guided vehicles. NOTE 2 Lithium cells, modules, battery packs, and battery systems are regulated by International Air Transport Association (IATA) and International Maritime Organization (IMO) for air and sea transport, and, regionally, by other authorities, mainly for land transport. Refer to IEC 62281 for additional information.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50342-1:2015/A2:2021(Amendment)
Lead-acid starter batteries - Part 1: General requirements and methods of test
SIST EN 50342-1:2016/A2:2021

TC21X working group 3 has been agree to implement following changes to EN 50342-1:2015/1:2018 - Deletion of high current discharge after water consumption test. This is not needed as a dedicated corrosion test is available in the document. - Limitation of the maximum discharge time in cranking performance test. Batteries with high power capability might be damaged if discharge until the cut off voltage of 6,0 V is reached. To prevent this the maximum discharge time of the second step of the cranking performance test has been limited to 180 s.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62485-6:2021(Main)
Safety requirements for secondary batteries and battery installations - Part 6: Safe operation of lithium-ion batteries in traction applications
SIST EN IEC 62485-6:2021

IEC 62485-6:2021 applies to battery installations used for electric off-road vehicles; it does not cover the design of such vehicles. Examples of the main applications are: - industrial • cleaning machines, • trucks for material handling, for example, lift trucks, tow trucks, automatic guided vehicles, • electrically propulsed lifting platforms; - other applications • electric powered boats and ships.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62485-5:2021(Main)
Safety requirements for secondary batteries and battery installations - Part 5: Safe operation of stationary lithium ion batteries
SIST EN IEC 62485-5:2021

IEC 62485-5:2020 applies to the installation of one or more stationary secondary batteries having a maximum aggregate DC voltage of 1 500 V to any DC part of the power network, and describes the principal measures for protections during normal operation or under expected fault conditions against hazards generated from: – electricity, – short-circuits, – electrolyte, – gas emission, – fire, – explosion. This document provides requirements on safety aspects associated with the installation, use, inspection, and maintenance and disposal of lithium ion batteries used in stationary applications.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63193:2021(Main)
Lead-acid batteries for propulsion power of lightweight vehicles - General requirements and methods of test
SIST EN IEC 63193:2021

IEC 63193:2020 is applicable to lead-acid batteries powering electric two-wheelers (mopeds) and three-wheelers (e-rickshaws and delivery vehicles), and also to golf cars and similar light utility and multi-passenger vehicles. The document specifies methods of tests tailored to batteries destined for the above‑referenced types of vehicles so as to ensure satisfactory and safe battery performance in the intended application. This document does not apply for example to lead-acid cells and batteries used for: vehicle engine starting applications (IEC 60095 series); traction applications (IEC 60254 series); stationary applications (IEC 60896 series); general purpose applications (IEC 61056 series); or to motorized wheelchairs and similar personal assist vehicles

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50342-4:2020(Main)
Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles
SIST EN 50342-4:2021

This document is applicable to lead-acid batteries used for heavy vehicles. The object of this document is to specify the European requirements of the main dimensions of starter batteries. For new and future developments of the above applications, it is expected that only batteries from the “Preferred Types” series be used. Batteries of the series of “Other Types” exist under several national standards. They have been transferred from the previous standard EN 60095 4. The preferred types A, B and C are newly introduced and correspond closely to the types D4, D5 and D6 with some differences in tolerances and dimensions.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62984-3:2020(Main)
High-temperature secondary batteries - Part 3: Sodium-based batteries - Performance requirements and tests
SIST EN IEC 62984-3:2020

IEC 62984-3:2020 specifies performance requirements and test procedures for high­-temperature batteries based on sodium for mobile and/or stationary use and whose rated voltage does not exceed 1 500 V. Sodium based batteries include sodium-sulphur batteries and sodium-nickel chloride batteries; both are high-temperature batteries and use a solid, sodium conducting electrolyte. Additional information on sodium-based batteries technology, their chemistries and construction are given in Annex B. This document does not cover aircraft batteries, covered by IEC 60952 (all parts), and batteries for the propulsion of electric road vehicles, covered by IEC 61982 (all parts).

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day