EN 60317-51:2001

SLOVENSKI STANDARD
01-april-2002
Specifications for particular types of winding wires – Part 51: Solderable
polyurethane enamelled round copper wire, class 180
Specifications for particular types of winding wires -- Part 51: Solderable polyurethane
enamelled round copper wire, class 180
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten -- Teil 51:
Runddraht aus Kupfer, verzinnbar, lackisoliert mit Polyurethan, Klasse 180
Spécifications pour types particuliers de fils de bobinage -- Part 51: Fil de section
circulaire en cuivre émaillé avec polyuréthane brasable, classe 180
Ta slovenski standard je istoveten z: EN 60317-51:2001
ICS:
29.060.10 Žice Wires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60317-51
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2001
ICS 29.060.10
English version
Specifications for particular types of winding wires
Part 51: Solderable polyurethane enamelled round copper wire, class 180
(IEC 60317-51:2001)
Spécifications pour types particuliers Technische Lieferbedingungen für
de fils de bobinage bestimmte Typen von Wickeldrähten
Part 51: Fil de section circulaire Teil 51: Runddraht aus Kupfer,
en cuivre émaillé avec polyuréthane verzinnbar, lackisoliert mit Polyurethan,
brasable, classe 180 Klasse 180
(CEI 60317-51:2001) (IEC 60317-51:2001)
This European Standard was approved by CENELEC on 2001-06-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-51:2001 E
Foreword
The text of document 55/743/FDIS, future edition 1 of IEC 60317-51, prepared by IEC TC 55, Winding
wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60317-51 on 2001-06-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-06-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60317-51:2001 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60317-51:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60317-0-1 1997 Specifications for particular types of EN 60317-0-1 1998
winding wires
Part 0-1: General requirements -
Enamelled round copper wire
NORME CEI
INTERNATIONALE IEC
60317-51
INTERNATIONAL
Première édition
STANDARD
First edition
2001-05
Spécifications pour types particuliers
de fils de bobinage –
Partie 51:
Fil de section circulaire en cuivre émaillé
avec polyuréthane brasable, classe 180
Specifications for particular types
of winding wires –
Part 51:
Solderable polyurethane enamelled
round copper wire, class 180
 IEC 2001 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
G
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60317-51  IEC:2001 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES –
Part 51: Solderable polyurethane enamelled
round copper wire, class 180
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technica
...