EN 61753-087-6:2012

SLOVENSKI STANDARD
01-junij-2012
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
1DSUDYHEUH]NRQHNWRUMHY]DãLURNRSDVRYQLYDORYQLPXOWLSOHNV::'0]D
HQRURGQLGYRVPHUQLQPQDY]JRUQMLLQQPQDY]GROQMLSUHQRV]D
NDWHJRULMR21HQDG]RURYDQRRNROMH,(&
Fibre optic interconnecting devices and passive components - Performance standard -
Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490
nm downstream WWDM devices for category O - Uncontrolled environment (IEC 61753-
087-6:2012)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
087-6: Nicht mit Steckverbindern versehene bidirektionale 1310-nm-upstream- und 1490
-nm-downstream-Einmoden-WWDM-Bauteile für die Kategorie O - Unkontrollierte
Umgebung (IEC 61753-087-6:2012)
Dispositifs d’interconnexion et composants passifs à fibres optiques - Norme de
performance - Partie 087-6 : Dispositifs WWDM unimodaux non connectorisés
bidirectionnels 1 310 nm en voie montante et 1 490 nm en voie descendante pour la
catégorie O - Environnement non contrôlé (CEI 61753-087-6:2012)
Ta slovenski standard je istoveten z: EN 61753-087-6:2012
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61753-087-6
NORME EUROPÉENNE
April 2012
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Performance standard -
Part 087-6: Non-connectorised single-mode bidirectional 1310 nm
upstream and 1490 nm downstream WWDM devices for category O -
Uncontrolled environment
(IEC 61753-087-6:2012)
Dispositifs d’interconnexion et Lichtwellenleiter -
composants passifs à fibres optiques - Verbindungselemente und passive
Norme de performance - Bauteile -
Partie 087-6 : Dispositifs WWDM Betriebsverhalten -
unimodaux non connectorisés Teil 087-6: Nicht mit Steckverbindern
bidirectionnels 1 310 nm en voie montante versehene bidirektionale 1310-nm-
et 1 490 nm en voie descendante pour la upstream- und 1490-nm-downstream-
catégorie O - Environnement non contrôlé Einmoden-WWDM-Bauteile für die
Kategorie O -
Unkontrollierte Umgebung
(IEC 61753-087-6:2012)
This European Standard was approved by CENELEC on 2012-03-27. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-087-6:2012 E

Foreword
The text of document 86B/3256/CDV, future edition 1 of IEC 61753-087-6, prepared by SC 86B, "Fibre
optic interconnecting devices and passive components", of IEC/TC 86, "Fibre optics" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-087-6:2012.

The following dates are fixed:
(dop) 2012-12-27
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-03-27

standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61753-087-6:2012 was approved by CENELEC as a European
Standard without any modification.

- 3 - EN 61753-087-6:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60793-2-50 - Optical fibres - EN 60793-2-50 -
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres

IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)

IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention

IEC 61300-2-5 - Fibre optic interconnecting devices and EN 61300-2-5 -
passive components - Basic test and
measurement procedures -
Part 2-5: Tests - Torsion
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
IEC 61300-2-14 - Fibre optic interconnecting devices and EN 61300-2-14 -
passive components - Basic test and
measurement procedures -
Part 2-14: Tests - Optical power handling and
damage threshold characterization

IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)

IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature

IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain relief of
fibre optic devices
Publication Year Title EN/HD Year
IEC 61300-2-48 - Fibre optic interconnecting devices and EN 61300-2-48 -
passive components - Basic test and
measurement procedures -
Part 2-48: Tests - Temperature-humidity
cycling
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures -
Part 3-2: Examinations and measurements -
Polarization dependent loss in a single-mode
fibre optic device
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and measurements -
Return loss
IEC 61300-3-7 - Fibre optic interconnecting devices and EN 61300-3-7 -
(mod) passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components

IEC 61300-3-20 - Fibre optic interconnecting devices and EN 61300-3-20 -
passive components - Basic test and
measurement procedures -
Part 3-20: Examinations and measurements -
Directivity of fibre optic branching devices

IEC 61753-1 - Fibre optic interconnecting devices and EN 61753-1 -
passive components performance standard -
Part 1: General and guidance for performance
standards
IEC 62074-1 - Fibre optic interconnecting devices and EN 62074-1 -
passive components - Fibre optic WDM
devices -
Part 1: Generic specification
IEC 61753-087-6 ®
Edition 1.0 2012-02
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Performance

standard –
Part 087-6: Non-connectorised single-mode bidirectional 1 310 nm upstream

and 1 490 nm downstream WWDM devices for category O – Uncontrolled

environment
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
N
ICS 33.180.20 ISBN 978-2-88912-934-8

– 2 – 61753-087-6  IEC:2012(E)
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Test . 6
4 Test report. 6
5 Performance requirements . 6
5.1 Reference components . 6
5.2 Dimensions . 7
5.3 Sample size, sequencing and grouping . 7
5.4 Test Details and Requirements . 7
Annex A (normative) Sample size, sequencing and grouping . 12
Annex B (informative) General information for 1 310 nm upstream and 1 490 nm
downstream PON WWDM device . 13
Bibliography . 14

Figure B.1 – Example for 1490 nm downstream and 1310 nm upstream WWDM at
central office and customer side . 13

Table 1 – Test details and requirements . 7
Table A.1 – Sample size and sequencing of tests . 12

61753-087-6  IEC:2012(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 087-6: Non-connectorised single-mode
bidirectional 1 310 nm upstream and
1 490 nm downstream WWDM devices for category O –
Uncontrolled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not pr
...