EN 186290:1997
(Main)Sectional Specification: Connector sets for optical fibres and cables - Type MPO
- BACK
- 17-Nov-1997
- 31-May-1998
- 33.180.20
- M/212
- CLC/TC 86BXA
Sectional Specification: Connector sets for optical fibres and cables - Type MPO
Superseded by EN 61754-7:2005 (confirmed by D133/C031)
Rahmenspezifikation: Steckverbindersätze für Lichtwellenleiter und LWL-Kabel - Bauart MPO
Spécification particulière: Jeux de connecteurs pour fibres et câbles optiques - Type MPO
Sectional Specification: Connector sets for optical fibres and cables - Type MPO
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sectional Specification: Connector sets for optical fibres and cables - Type MPORahmenspezifikation: Steckverbindersätze für Lichtwellenleiter und LWL-Kabel - Bauart MPOSpécification particulière: Jeux de connecteurs pour fibres et câbles optiques - Type MPOSectional Specification: Connector sets for optical fibres and cables - Type MPO33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 186290:1997SIST EN 186290:1999en01-ma
...
This May Also Interest You
IEC 61754-13:2024 defines the standard interface dimensions for the type FC-PC family of connectors. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) revising normative reference reflecting the latest documents; b) addition of intermateability in 5.2; c) changes of dimensions of the plug connector interface in Table 2 and Table 3; d) addition of Grade Am, Bm and Cm in Table 3.
- Standard18 pagesEnglish languagesale 10% offe-Library read for×1 day
- 27-Jun-2024
- 33.180.20
- CLC/TC 86BXA
IEC 61300-2-27:2024 determines the effects of dust on fibre optic interconnecting devices or passive components. This second edition cancels and replaces the first edition published in 1995. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) normative references have been added; b) the relative humidity requirement during the test has been modified; c) the procedure description has been modified; d) Figure 1 showing possible test configurations has been added; e) the severity of the test has been updated according to the component and performance category; f) Clause 8 has been added, listing details to be specified and reported.
- Standard14 pagesEnglish languagesale 10% offe-Library read for×1 day
- 13-Jun-2024
- 33.180.20
- CLC/TC 86BXA
- Amendment18 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-May-2024
- 33.180.20
- CLC/TC 86BXA
IEC 61755-3-1:2024 defines the dimensional limits of the optical interface that are necessary for single-mode fibre optic connectors with 2,5 mm or 1,25 mm diameter cylindrical zirconia (ZrO2) ferrules to meet the specific requirements for fibre-to-fibre interconnection, as defined in IEC 61755-2-1. Ferrules made from the material specified in this document are suitable for use in all the operating service environments defined in IEC 61753-1. Ferrule dimensions and features are contained in the IEC 61754 series of fibre optic connector interface standards. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) normative references have been added; b) the introduction of an additional optical interface with a different fibre core eccentricity profile. The previous revision of optical interface standard is named "Variant 1: with fibre core axis oriented towards the connector guide key". The additional optical interface is named "Variant 2: with fibre core axis not oriented towards the connector guide key"; c) statements added related to interoperability, where both variants remain intermateable within a given performance grade and backwards compatible to IEC 61755-3-1:2006; d) The addition of Grade B and Grade C interface requirements for both variants; e) The addition of a descriptive statistic for the mean fibre core eccentricity (mean value) to describe the distribution of fibre core eccentricity to ensure interoperability; f) A new informative Annex B to give guidance on the expected attenuation when mated to a reference connector plug; g) A new informative Annex C to give guidance related to the simulation of optical interface attenuation; h) A new informative Annex D to give guidance related to estimation of mean fibre eccentricity limits for finite production batch sizes.
- Standard27 pagesEnglish languagesale 10% offe-Library read for×1 day
- 23-May-2024
- 04-Sep-2022
- 33.180.20
- CLC/TC 86BXA
IEC 61755-3-2:2024 defines the dimensional limits of the optical interface that are necessary for single-mode fibre optic connectors with 2,5 mm or 1,25 mm diameter cylindrical zirconia (ZrO2) ferrules polished at an 8° angle to meet the specific requirements for fibre-to-fibre interconnection, as defined in IEC 61755-2-2. Ferrules made from the material specified in this standard are suitable for use in all the operating service environments defined in IEC 61753-1. Ferrule dimensions and features are contained in the IEC 61754 series of fibre optic connector interface standards. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) normative references have been added; b) The introduction of an additional optical interface with a different fibre core eccentricity profile. The previous revision of optical interface standard is named "Variant 1: with fibre core axis oriented towards the connector guide key". The additional optical interface is named "Variant 2: with fibre core axis not oriented towards the connector guide key"; c) statements added related to interoperability, where both variants remain intermateable within a given performance grade and are fully backwards compatible to IEC 61755-3-2:2006; d) The addition of Grade B and Grade C interface requirements for both variants; f) The addition of a descriptive statistic for the mean fibre core eccentricity (mean value) to describe the distribution of fibre core eccentricity to ensure interoperability; g) A new informative Annex B to give guidance on the expected attenuation when mated to a reference connector plug; h) A new informative Annex D to give guidance related to estimation of mean fibre eccentricity limits for finite production batch sizes.
- Standard26 pagesEnglish languagesale 10% offe-Library read for×1 day
- 23-May-2024
- 04-Sep-2022
- 33.180.20
- CLC/TC 86BXA
IEC 60875-1:2024 is available as IEC 60875-1:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60875-1:2024 applies to non-wavelength-selective fibre optic branching devices, all exhibiting the following features: - they are passive, in that they contain no optoelectronic or other transducing elements; - they have three or more ports for either the entry or exit, or both, of optical power, and share optical power among these ports in a predetermined fashion; - the ports are optical fibres, or optical fibre connectors. This document establishes uniform requirements for the optical, mechanical and environmental properties. This seventh edition cancels and replaces the sixth edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) removal of variant and reference extensions in clause classification b) removal of specification system in clause documentation c) removal of interface standards, reliability standards and interlinking in clause standardization system
- Standard19 pagesEnglish languagesale 10% offe-Library read for×1 day
- 23-May-2024
- 33.180.20
- CLC/TC 86BXA
- Amendment5 pagesEnglish languagesale 10% offe-Library read for×1 day
- Amendment5 pagesEnglish languagesale 10% offe-Library read for×1 day
- 25-Apr-2024
- 33.180.20
- CLC/TC 86BXA
IEC 63267-2-2:2024 defines the dimensional limits of an optical interface for reference connections necessary to meet specific requirements for fibre-to-fibre interconnection of non-angled and angled polished multimode reference connectors intended to be used for attenuation measurements in the field or factory. Several grades of reference connections are defined in this document. The multimode reference connections are terminated to restricted IEC 60793-2-10 A1-OM2b to A1-OM5b fibre at the 850 nm band only. The geometrical dimensions and tolerances of the specified reference connections have been developed primarily to limit the variation in measured attenuation between multiple sets of two reference connectors, and therefore to limit the variation in measured attenuation between randomly chosen reference connectors when mated with connectors in the field or factory.
- Standard16 pagesEnglish languagesale 10% offe-Library read for×1 day
- 25-Apr-2024
- 33.180.20
- CLC/TC 86BXA
IEC 63267-2-1:2024 defines a set of specified conditions for an enhanced macro bend of 50/125 µm, graded index multimode fibre optic connection that is maintained in order to satisfy the requirements of attenuation and return loss performance in a randomly mated pair of polished physically contacting (PC) fibres. An encircled flux (EF) compliant launch condition in accordance with IEC 61300-1, at an operational wavelength of 850 nm, is used for determination of performance grades, based on lateral fibre core offset, numerical aperture (NA) mismatch, and fibre core diameter (CD) variation. Fibre core angular offset is considered insignificant given the state-of-the-art and is excluded as a factor for attenuation estimation. Attenuation and return loss performance grades are defined in IEC 63267-1.
- Standard15 pagesEnglish languagesale 10% offe-Library read for×1 day
- 25-Apr-2024
- 33.180.20
- CLC/TC 86BXA
IEC 61300-2-44:2024 specifies a test to determine the influence of flexing under tensile load of the strain relief of fibre optic interconnecting devices or components. The intention is to simulate the number of flexing cycles which would typically be experienced during service life. This test is applied to both single fibre cable and multiple fibre cable. This fourth edition cancels and replaces the third edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) replaced active monitoring with transient loss for measurements during test; b) harmonized recommended severities according to IEC 61753-1.
- Standard12 pagesEnglish languagesale 10% offe-Library read for×1 day
- 04-Apr-2024
- 33.180.20
- CLC/TC 86BXA
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.