EN IEC 61784-5-22:2024

SLOVENSKI STANDARD
oSIST prEN IEC 61784-5-22:2022
01-junij-2022
Industrijska komunikacijska omrežja - Profili - 5-22. del: Inštalacija procesnih vodil
- Inštalacijski profili za CPF 22
Industrial communication networks - Profiles - Part 5-22: Installation of fieldbuses -
Installation profiles for CPF 22
Réseaux de communication industriels - Profils - Partie 5-22: Installation de bus de
terrain - Profils d'installation pour CPF 22
Ta slovenski standard je istoveten z: prEN IEC 61784-5-22:2022
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 Večslojne uporabniške Multilayer applications
rešitve
oSIST prEN IEC 61784-5-22:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN IEC 61784-5-22:2022

oSIST prEN IEC 61784-5-22:2022
65C/1161/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61784-5-22 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-03-25 2022-06-17
SUPERSEDES DOCUMENTS:
65C/1059/CD, 65C/1073/CC
IEC SC 65C : INDUSTRIAL NETWORKS
SECRETARIAT: SECRETARY:
France Ms Valérie DEMASSIEUX
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

SC 22G,TC 57,SC 121A
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Industrial communication networks – Profiles – Part 5-22: Installation of fieldbuses –
Installation profiles for CPF 22

PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

oSIST prEN IEC 61784-5-22:2022
– 2 – IEC CDV 61784-5-22 © IEC 2022
1 CONTENTS
3 FOREWORD . 4
4 INTRODUCTION . 6
5 1 Scope . 7
6 2 Normative references . 7
7 3 Terms, definitions and abbreviated terms . 7
8 4 CPF 22: Overview of installation profiles . 7
9 5 Installation profile conventions . 8
10 6 Conformance to installation profiles . 8
11 Annex A (normative) CP 22/1 (AUTBUS™) specific installation profile . 10
12 A.1 Installation profile scope . 10
13 A.2 Normative references . 10
14 A.3 Installation profile terms, definitions, and abbreviated terms . 10
15 A.3.1 Terms and definitions . 10
16 A.3.2 Abbreviated terms . 10
17 A.3.3 Conventions for installation profiles . 10
18 A.4 Installation planning . 10
19 A.4.1 General . 10
20 A.4.2 Planning requirements . 10
21 A.4.3 Network capabilities. 11
22 A.4.4 Selection and use of cabling components . 12
23 A.4.5 Cabling planning documentation . 15
24 A.4.6 Verification of cabling planning specification . 15
25 A.5 Installation implementation . 15
26 A.5.1 General requirements . 15
27 A.5.2 Cable installation . 15
28 A.5.3 Connector installation . 16
29 A.5.4 Terminator installation . 16
30 A.5.5 Device installation . 17
31 A.5.6 Coding and labelling . 17
32 A.5.7 Earthing and bonding of equipment and devices and shield cabling . 17
33 A.5.8 As-implemented cabling documentation . 17
34 A.6 Installation verification and installation acceptance test . 17
35 A.6.1 General . 17
36 A.6.2 Installation verification . 17
37 A.6.3 Installation acceptance test . 18
38 A.7 Installation administration . 18
39 A.8 Installation maintenance and installation troubleshooting . 18
41 Figure 1 – Standards relationships . 6
43 Table A.1 – Basic network characteristics for balanced cabling not based on Ethernet . 11
44 Table A.2 – Basic network characteristics for un-balanced cabling not based on
45 Ethernet . 11
46 Table A.3 – Information relevant to copper cable: fixed cables . 12

oSIST prEN IEC 61784-5-22:2022
IEC CDV 61784-5-22 © IEC 2022 – 3 –
47 Table A.4 – Connectors for copper cabling CPs not based on Ethernet – twisted pair . 13
48 Table A.5 – Connectors for copper cabling CPs not based on Ethernet – Coaxial cable . 13
49 Table A.6 – Parameters for balanced cables – twisted pair . 16
50 Table A.7 – Parameters for un-balanced cables – coaxial cable . 16
oSIST prEN IEC 61784-5-22:2022
– 4 – IEC CDV 61784-5-22 © IEC 2022
54 INTERNATIONAL ELECTROTECHNICAL COMMISSION
55 ____________
57 INDUSTRIAL COMMUNICATION NETWORKS –
58 PROFILES –
60 Part 5-22: Installation of fieldbuses –
61 Installation profiles for CPF 22
64 FOREWORD
65 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
66 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
67 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
68 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
69 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
70 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
71 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
72 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
73 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
74 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
75 consensus of opinion on the relevant subjects since each technical committee has representation from all
76 interested IEC National Committees.
77 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
78 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
79 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
80 misinterpretation by any end user.
81 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
82 transparently to the maximum extent possible in their national and regional publications. Any divergence between
83 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
84 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
85 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
86 services carried out by independent certification bodies.
87 6) All users should ensure that they have the latest edition of this publication.
88 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
89 members of its technical committees and IEC National Committees for any personal injury, property damage or
90 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
91 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
92 Publications.
93 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
94 indispensable for the correct application of this publication.
95 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
96 rights. IEC shall not be held responsible for identifying any or all such patent rights.
97 IEC 61784-5-22 has been prepared by subcommittee 65C: Industrial Networks, of IEC technical
98 committee 65: Industrial-process measurement, control and automation. It is an International
99 Standard.
100 This document is to be used in conjunction with IEC 61918:2018 and IEC 61918:2018/AMD1:—.
101 The text of this International Standard is based on the following documents:
FDIS Report on voting
65C/XX/FDIS 65C/XX/RVD
103 Full information on the voting for the approval of this international Standard can be found in the
104 report on voting indicated in the above table.
105 The language used for the development of this International Standard is English.

oSIST prEN IEC 61784-5-22:2022
IEC CDV 61784-5-22 © IEC 2022 – 5 –
106 This document was drafted in accordance with the ISO/IEC Directives, Part 2, and developed
107 in accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement,
108 available at www.iec.ch/members_experts/refdocs. The main document types developed by IEC
109 are described in greater detail at www.iec.ch/standardsdev/publications.
110 A list of all parts of IEC 61784-5 series, under the general title Industrial communications
111 networks – Profiles – Installation of fieldbuses, can be found on the IEC website.
112 The committee has decided that the contents of this document will remain unchanged until the
113 stability date indicated on the IEC website under webstore.iec.ch in the data related to the
114 specific document. At this date, the document will be
115 • reconfirmed,
116 • withdrawn,
117 • replaced by a revised edition, or
118 • amended.
IMPORTANT – The 'colour inside' logo on the cover page of this document indicates that it
contains colours which are considered to be useful for the correct understanding of its
contents. Users should therefore print this document using a colour printer.
121 A bilingual version of this publication may be issued at a later date.
oSIST prEN IEC 61784-5-22:2022
– 6 – IEC CDV 61784-5-22 © IEC 2022
124 INTRODUCTION
125 This International Standard is one of a series produced to facilitate the use of communication
126 networks in industrial control systems.
127 IEC 61918:2018 and IEC 61918:2018/AMD1:— provide the common requirements for the
128 installation of communication networks in industrial control systems. This installation profile
129 document provides the installation profiles of the communication profiles (CP) of a specific
130 communication profile family (CPF) by stating which requirements of IEC 61918 fully apply and,
131 where necessary, by supplem
...