EN 60335-2-35:1994

EN 60335-2-35:1994 is a standard published by CLC. Its full title is "Safety of household and similar electrical appliances - Part 2: Particular requirements for instantaneous water heaters". This standard covers: This clause of Part 1 is applicable except as follows: 1.1 Replacement: This standard applies to electrical instantaneous water heaters intended for heating water to a temperature below its boiling point. NOTES 1. Heating elements incorporated in instantaneous water heaters may be sheathed or bare. 2. Instantaneous water heaters not intended for normal household use, but which nevertheless may be a source of danger to the public, such as water heaters intended to be used in shops, in light industry and on farms, are within the scope of this standard. 3. This standard does not take into account the special hazards which exist in nurseries and other places where there are young children or aged or infirm persons without supervision; in such cases, additional requirements may be necessary. 4. This standard does not apply to: - instantaneous water heaters designed exclusively for industrial purposes; - instantaneous water heaters intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); - instantaneous water heaters of the electrode type; - storage water heaters (EN 60335-2-21). 5. For instantaneous water heaters intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary. 6. For instantaneous water heaters intended to be used in tropical countries, special requirements may be necessary. 7. Attention is drawn to the fact that in many countries additional requirements are specified by the national authorities responsible for health or water supplies, and for the protection of labour.

This clause of Part 1 is applicable except as follows: 1.1 Replacement: This standard applies to electrical instantaneous water heaters intended for heating water to a temperature below its boiling point. NOTES 1. Heating elements incorporated in instantaneous water heaters may be sheathed or bare. 2. Instantaneous water heaters not intended for normal household use, but which nevertheless may be a source of danger to the public, such as water heaters intended to be used in shops, in light industry and on farms, are within the scope of this standard. 3. This standard does not take into account the special hazards which exist in nurseries and other places where there are young children or aged or infirm persons without supervision; in such cases, additional requirements may be necessary. 4. This standard does not apply to: - instantaneous water heaters designed exclusively for industrial purposes; - instantaneous water heaters intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); - instantaneous water heaters of the electrode type; - storage water heaters (EN 60335-2-21). 5. For instantaneous water heaters intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary. 6. For instantaneous water heaters intended to be used in tropical countries, special requirements may be necessary. 7. Attention is drawn to the fact that in many countries additional requirements are specified by the national authorities responsible for health or water supplies, and for the protection of labour.

EN 60335-2-35:1994 is classified under the following ICS (International Classification for Standards) categories: 97.100 - Domestic, commercial and industrial heating appliances. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 60335-2-35:1994 has the following relationships with other standards: It is inter standard links to HD 282 S1:1990/A1:1992, EN 60335-2-35:1998, EN 60335-2-35:1994/A51:1995. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 60335-2-35:1994 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 73/23/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 60335-2-35:1994 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.