Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables to be terminated with connectors

IEC 60794-2-22: 2016 is a detail specification and specifies breakout optical cables with multiple simplex fibre cables for termination with connectors. The requirements of the sectional specification IEC 60794-2 are applicable to cables covered by this document. The requirements of the family specification IEC 60794-2-20 are applicable to breakout cables to be installed without terminated connectors. Fan-out kits used for cable systems are not covered by this document. Keywords: breakout optical cables with multiple simplex fibre cables

Lichtwellenleiterkabel - Teil 2-22: LWL-Innenkabel - Bauartspezifikation für mit Steckverbinder abzuschließende Simplex-Breakout-Kabel

Câbles à fibres optiques - Partie 2-22: Câbles intérieurs - Spécification particulière pour câbles optiques épanouis simplex multiples munis de connecteurs

L'IEC 60794-2-22: 2016 est une spécification particulière pour les câbles optiques épanouis avec plusieurs câbles à fibres simplex équipés de connecteurs. Les exigences de la spécification intermédiaire IEC 60794-2 sont applicables aux câbles couverts par le présent document. Les exigences de la spécification de famille IEC 60794-2-20 sont applicables aux câbles épanouis destinés à être installés sans connecteurs. Les kits d'éclatement utilisés dans les systèmes de câbles ne sont pas couverts par le présent document. Mots clés: câbles optiques épanouis avec plusieurs câbles à fibres simplex

Optični kabli - 2-22. del: Notranji optični kabli - Podrobna specifikacija večsimpleksnih odporno oplaščenih optičnih kablov, ki se zaključujejo s konektorjem (IEC 60794-2-22:2016)

Ta del standarda IEC 60794 je podrobna specifikacija in določa večsimpleksne odporno-oplaščene optične kable, ki se zaključujejo s konektorji.
Zahteve področne specifikacije IEC 60794-2 se uporabljajo za kable, ki jih zajema ta dokument.
Zahteve skupinske specifikacije IEC 60794-2-20 se uporabljajo za odporno-oplaščene kable, ki se nameščajo brez končnih konektorjev.
Izhodni kompleti za kabelske sisteme niso zajeti v tem dokumentu.

General Information

Status
Published
Publication Date
16-Mar-2017
Withdrawal Date
10-Jan-2020
Current Stage
6060 - Document made available - Publishing
Start Date
17-Mar-2017
Completion Date
17-Mar-2017

Relations

Buy Standard

Standard
EN 60794-2-22:2017 - BARVE
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2017
2SWLþQLNDEOLGHO1RWUDQMLRSWLþQLNDEOL3RGUREQDVSHFLILNDFLMD
YHþVLPSOHNVQLKRGSRUQRRSODãþHQLKRSWLþQLKNDEORYNLVH]DNOMXþXMHMRV
NRQHNWRUMHP ,(&
Optical fibre cables - Part 2-22: Indoor optical fibre cables - Detail specification for multi-
simplex breakout optical cables to be terminated with connector (IEC 60794-2-22:2016)
Ta slovenski standard je istoveten z: EN 60794-2-22:2017
ICS:
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60794-2-22

NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2017
ICS 33.180.10
English Version
Optical fibre cables - Part 2-22: Indoor cables -
Detail specification for multi-simplex breakout optical cables to
be terminated with connectors
(IEC 60794-2-22:2016)
Câbles à fibres optiques - Partie 2-22: Câbles intérieurs - Lichtwellenleiterkabel - Teil 2-22: LWL-Innenkabel -
Spécification particulière pour câbles optiques épanouis Bauartspezifikation für mit Steckverbinder abzuschließende
simplex multiples munis de connecteurs Simplex-Breakout-Kabel
(IEC 60794-2-22:2016) (IEC 60794-2-22:2016)
This European Standard was approved by CENELEC on 2017-01-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60794-2-22:2017 E
European foreword
The text of document 86A/1765/FDIS, future edition 1 of IEC 60794-2-22, prepared by SC 86A "Fibres
and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60794-2-22:2017.
The following dates are fixed:
(dop) 2017-10-11
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2020-01-11
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60794-2-22:2016 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :
IEC 61753-1 NOTE Harmonized as EN 61753-1.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60811-202 -  Electric and optical fibre cables - Test EN 60811-202 -
methods for non-metallic materials -
Part 202: General tests - Measurement
of thickness of non-metallic sheath
IEC 60811-203 -  Electric and optical fibre cables - Test EN 60811-203 -
methods for non-metallic materials -
Part 203: General tests - Measurement
of overall dimensions
IEC 60793-1-1 -  Optical fibres - Part 1-1: Measurement EN 60793-1-1 -
methods and test procedures - General
and guidance
IEC 60793-1-20 -  Optical fibres - Part 1-20: Measurement EN 60793-1-20 -
methods and test procedures - Fibre
geometry
IEC 60793-1-21 -  Optical fibres - Part 1-21: Measurement EN 60793-1-21 -
methods and test procedures - Coating
geometry
IEC 60793-2 -  Optical fibres - Part 2: Product EN 60793-2 -
specifications - General
IEC 60793-2-10 -  Optical fibres - Part 2-10: Product EN 60793-2-10 -
specifications - Sectional specification
for category A1 multimode fibres
IEC 60793-2-50 -  Optical fibres - Part 2-50: Product EN 60793-2-50 -
specifications - Sectional specification
for class B single-mode fibres
IEC 60794-1-1 -  Optical fibre cables - Part 1-1: Generic EN 60794-1-1 -
specification - General
IEC 60794-1-21 -  Optical fibre cables - Part 1-21: Generic EN 60794-1-21 -
specification - Basic optical cable test
procedures - Mechanical tests methods
Publication Year Title EN/HD Year
IEC 60794-1-22 -  Optical fibre cables - Part 1-22: Generic EN 60794-1-22 -
specification - Basic optical cable test
procedures - Environmental test
methods
IEC 60794-2 -  Optical fibre cables - Part 2: Indoor EN 60794-2 -
cables - Sectional specification
IEC 60794-2-20 -  Optical fibre cables - Part 2-20: Indoor EN 60794-2-20 -
cables - Family specification for multi-
fibre optical cables
IEC 60794-2-50 -  Optical fibre cables - Part 2-50: Indoor EN 60794-2-50 -
cables - Family specification for simplex
and duplex cables for use in terminated
cable assemblies
IEC 60794-2-51 -  Optical fibre cables - Part 2-51: Indoor EN 60794-2-51 -
cables - Detail specification for simplex
and duplex cables for use in cords for
controlled environment
IEC 60794-2-22 ®
Edition 1.0 2016-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Optical fibre cables –
Part 2-22: Indoor cables – Detail specification for multi-simplex breakout optical

cables to be terminated with connectors

Câbles à fibres optiques –
Partie 2-22: Câbles intérieurs – Spécification particulière pour câbles optiques

épanouis simplex multiples munis de connecteurs

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.10 ISBN 978-2-8322-3793-9

– 2 – IEC 60794-2-22:2016 © IEC 2016
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Construction . 6
4.1 General . 6
4.2 Optical fibres . 7
4.3 Simplex cables . 7
4.4 Strength and anti-buckling members . 7
4.5 Ripcord . 7
4.6 Cable sheath . 7
4.7 Sheath marking . 7
4.8 Examples of cable constructions . 7
5 Tests . 7
5.1 General . 7
5.2 Dimensions . 8
5.3 Mechanical requirements . 8
5.3.1 General . 8
5.3.2 Cable bend . 8
5.4 Environmental requirements – Temperature cycling . 8
6 Transmission requirements . 9
7 Fire performance . 9
Annex A (normative) Cable sample preparation for bend and temperature cycling test . 10
Annex B (informative) Examples of cable constructions . 11
B.1 Breakout cable with simplex cables . 11
B.2 Breakout cable with subunit containing simplex cables. 11
Bibliography . 12

Figure A.1 – Cable sample preparation and lengths . 10
Figure B.1 – Example of a cross-section of a six-fibre breakout cable . 11
Figure B.2 – Example of a cross-section of a 24-fibre breakout cable . 11

Table 1 – Temperatures . 8

IEC 60794-2-22:2016 © IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL FIBRE CABLES –
Part 2-22: Indoor cables –
Detail specification for multi-simplex breakout
optical cables to be terminated with connectors

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC i
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.