EN IEC 62343-1:2019
(Main)Dynamic modules - Part 1: Performance standards - General conditions
Dynamic modules - Part 1: Performance standards - General conditions
This document provides general conditions for the standard performance of optical dynamic modules. All performance standards of dynamic modules are based on the general conditions defined in this document. Additional conditions are included in individual performance standards.
Dynamische Module - Teil 1: Betriebsverhaltensnormen - Allgemeine Bedingungen
Modules dynamiques - Partie 1: Normes de performance - Conditions générales
Le présent document fournit les conditions générales en vue de la performance normalisée des modules dynamiques optiques. L'ensemble des normes de performance des modules dynamiques sont fondées sur les conditions générales définies dans le présent document. Des conditions complémentaires sont incluses dans des normes de performance individuelles.
Dinamični moduli - 1. del: Tehnični standardi - Splošni pogoji (IEC 62343-1:2019)
IEC 62343-1:2016(E) zagotavlja tehnični standard splošnih pogojev za dinamične module. Vsi dinamični moduli morajo ustrezati zahtevani zmogljivosti, ki je opredeljena v posameznih tehničnih standardih v zvezi s splošnimi pogoji, določenimi v tem dokumentu. Posamezni tehnični standardi lahko vključujejo dodatne pogoje.
Ključne besede: dinamični moduli
General Information
- Status
- Published
- Publication Date
- 25-Apr-2019
- Withdrawal Date
- 12-Mar-2022
- Technical Committee
- CLC/SR 86C - Fibre optic systems and active devices
- Drafting Committee
- IEC/SC 86C - IEC_SC_86C
- Current Stage
- 6060 - Document made available - Publishing
- Start Date
- 26-Apr-2019
- Completion Date
- 26-Apr-2019
Relations
- Effective Date
- 23-Jan-2018
- Amended By
EN IEC 62343-1:2019/A1:2024 - Dynamic modules - Part 1: Performance standards - General conditions - Effective Date
- 13-Dec-2022
Overview
EN IEC 62343-1:2019 (IEC 62343-1:2019) defines the general conditions for performance standards of optical dynamic modules. It establishes the baseline environmental, spectral and test-condition requirements that all individual performance standards in the IEC 62343 series reference. This edition (2019) supersedes EN 62343-1:2016 and corrects/updates elements such as operating-condition and storage tables.
Key topics and technical requirements
- Scope and purpose
- Provides general conditions for standard performance tests of optical dynamic modules used in fibre optic systems.
- Performance tests are intended for initial design verification; reliability requirements are covered separately (IEC 62343-2).
- Operating conditions (minimum requirements)
- Operating temperature (case): −5 °C to 70 °C.
- Operating relative humidity: under consideration (modules are typically used in controlled central-office environments).
- Vibration: 5 Hz–100 Hz at up to 1 g (3 mm) sweep, 3-axis; optional 100–200 Hz at up to 2 g.
- Shock and maximum input power: specified in individual performance standards.
- Operating wavelength range (spectral bands)
- Spectral bands follow ITU‑T G.Supplement 39: O (1260–1360 nm), E (1360–1460 nm), S (1460–1530 nm), C (1530–1565 nm), L (1565–1625 nm), U (1625–1675 nm).
- Storage and non‑operating conditions (informative recommendations)
- Storage temperature: −40 °C to 70 °C (ambient).
- Storage relative humidity: 5% to 85% RH; absolute humidity within 24 g/kg dry air.
- Non‑operating shock/vibration/drop/packed transportation: typical values are given for module mass ranges and packed handling.
- Absolute maximum ratings (recommended items)
- Applied voltage, current, electrical power, input optical power - to be defined in product specifications.
Applications and who uses this standard
- Manufacturers and designers of optical dynamic modules (e.g., tunable filters, dynamic equalizers) use EN IEC 62343-1:2019 to set baseline test conditions for product performance validation.
- Test laboratories and QA teams use it to design reproducible performance tests and pass/fail criteria.
- Network equipment vendors and system integrators reference it when specifying module acceptance criteria for fiber optic systems deployed in central office or controlled environments.
- Procurement, certification and standards compliance teams rely on it for harmonized performance definitions across markets.
Related standards
- IEC 62343 (General and guidance)
- IEC 62343-1-2, IEC 62343-1-3 (specific dynamic module performance parts)
- IEC 62343-2 (reliability qualification)
- IEC TS 62538 (categorization of optical devices)
- ITU‑T G.Supplement 39 (spectral band definitions)
Keywords: EN IEC 62343-1:2019, dynamic modules, optical dynamic modules, performance standards, operating conditions, spectral bands, fibre optic systems, storage conditions, absolute maximum ratings.
Frequently Asked Questions
EN IEC 62343-1:2019 is a standard published by CLC. Its full title is "Dynamic modules - Part 1: Performance standards - General conditions". This standard covers: This document provides general conditions for the standard performance of optical dynamic modules. All performance standards of dynamic modules are based on the general conditions defined in this document. Additional conditions are included in individual performance standards.
This document provides general conditions for the standard performance of optical dynamic modules. All performance standards of dynamic modules are based on the general conditions defined in this document. Additional conditions are included in individual performance standards.
EN IEC 62343-1:2019 is classified under the following ICS (International Classification for Standards) categories: 33.180.01 - Fibre optic systems in general; 33.180.99 - Other fibre optic equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN IEC 62343-1:2019 has the following relationships with other standards: It is inter standard links to EN 62343-1:2016, EN IEC 62343-1:2019/A1:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN IEC 62343-1:2019 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2019
Nadomešča:
SIST EN 62343-1:2016
Dinamični moduli - 1. del: Tehnični standardi - Splošni pogoji (IEC 62343-1:2019)
Dynamic modules - Part 1: Performance standards - General conditions (IEC 62343-
1:2019)
Dynamische Module - Teil 1: Betriebsverhaltensnorm - Allgemeine Bedingungen (IEC
62343-1:2019)
Modules dynamiques - Partie 1: Normes de performance - Conditions générales (IEC
62343-1:2019)
Ta slovenski standard je istoveten z: EN IEC 62343-1:2019
ICS:
33.180.01 Sistemi z optičnimi vlakni na Fibre optic systems in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62343-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2019
ICS 33.180.01; 33.180.99 Supersedes EN 62343-1:2016
English Version
Dynamic modules - Part 1: Performance standards - General
conditions
(IEC 62343-1:2019)
Modules dynamiques - Partie 1: Normes de performance - Dynamische Module - Teil 1: Betriebsverhaltensnorm -
Conditions générales Allgemeine Bedingungen
(IEC 62343-1:2019) (IEC 62343-1:2019)
This European Standard was approved by CENELEC on 2019-03-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63093-13:2019 E
European foreword
The text of document 86C/1518/CDV, future edition 2 of IEC 62343-1, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62343-1:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-12-13
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-03-13
document have to be withdrawn
This document supersedes EN 62343-1:2016, of which it constitutes a technical revision.
This edition includes the following technical changes with respect to the previous edition:
a) errors in Table 1 have been corrected
b) the content of Table A.1 has been revised.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62343-1:2019 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 62343 NOTE Harmonized as EN 62343
IEC 62343-1-2 NOTE Harmonized as EN 62343-1-2
IEC 62343-1-3 NOTE Harmonized as EN 62343-1-3
IEC 62343-2 NOTE Harmonized as EN 62343-2
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 62343 - Dynamic modules – General and guidance EN 62343 -
IEC/TS 62538 - Categorization of optical devices - -
ITU-T - Optical system design and engineering - -
Recommendation considerations
G.Sup39
IEC 62343-1 ®
Edition 2.0 2019-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Dynamic modules –
Part 1: Performance standards – General conditions
Modules dynamiques –
Partie 1: Normes de performance – Conditions générales
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.01; 33.180.99 ISBN 978-2-8322-6508-6
– 2 – IEC 62343-1:2019 © IEC 2019
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Requirements of operating conditions . 6
5 Requirements of operating wavelength range (spectral band) . 7
Annex A (informative) Recommendations for other conditions on product
specifications . 8
A.1 Storage environmental conditions . 8
A.2 Absolute maximum ratings . 8
Bibliography . 9
Table 1 – Operating conditions . 7
Table 2 – Spectral bands . 7
Table A.1 – Typical storage environmental conditions . 8
Table A.2 – Recommended absolute maximum rating items . 8
IEC 62343-1:2019 © IEC 2019 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DYNAMIC MODULES –
Part 1: Performance standards – General conditions
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters ex
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...