EN IEC 62343-1:2019

SLOVENSKI STANDARD
01-julij-2019
Nadomešča:
SIST EN 62343-1:2016
Dinamični moduli - 1. del: Tehnični standardi - Splošni pogoji (IEC 62343-1:2019)
Dynamic modules - Part 1: Performance standards - General conditions (IEC 62343-
1:2019)
Dynamische Module - Teil 1: Betriebsverhaltensnorm - Allgemeine Bedingungen (IEC
62343-1:2019)
Modules dynamiques - Partie 1: Normes de performance - Conditions générales (IEC
62343-1:2019)
Ta slovenski standard je istoveten z: EN IEC 62343-1:2019
ICS:
33.180.01 Sistemi z optičnimi vlakni na Fibre optic systems in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62343-1

NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2019
ICS 33.180.01; 33.180.99 Supersedes EN 62343-1:2016
English Version
Dynamic modules - Part 1: Performance standards - General
conditions
(IEC 62343-1:2019)
Modules dynamiques - Partie 1: Normes de performance - Dynamische Module - Teil 1: Betriebsverhaltensnorm -
Conditions générales Allgemeine Bedingungen
(IEC 62343-1:2019) (IEC 62343-1:2019)
This European Standard was approved by CENELEC on 2019-03-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63093-13:2019 E

European foreword
The text of document 86C/1518/CDV, future edition 2 of IEC 62343-1, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62343-1:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-12-13
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-03-13
document have to be withdrawn
This document supersedes EN 62343-1:2016, of which it constitutes a technical revision.
This edition includes the following technical changes with respect to the previous edition:

a) errors in Table 1 have been corrected
b) the content of Table A.1 has been revised.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62343-1:2019 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 62343 NOTE Harmonized as EN 62343
IEC 62343-1-2 NOTE Harmonized as EN 62343-1-2
IEC 62343-1-3 NOTE Harmonized as EN 62343-1-3
IEC 62343-2 NOTE Harmonized as EN 62343-2

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 62343 -  Dynamic modules – General and guidance EN 62343 -
IEC/TS 62538 -  Categorization of optical devices - -
ITU-T -  Optical system design and engineering - -
Recommendation considerations
G.Sup39
IEC 62343-1 ®
Edition 2.0 2019-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Dynamic modules –
Part 1: Performance standards – General conditions

Modules dynamiques –
Partie 1: Normes de performance – Conditions générales

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.01; 33.180.99 ISBN 978-2-8322-6508-6

– 2 – IEC 62343-1:2019 © IEC 2019
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Requirements of operating conditions . 6
5 Requirements of operating wavelength range (spectral band) . 7
Annex A (informative) Recommendations for other conditions on product
specifications . 8
A.1 Storage environmental conditions . 8
A.2 Absolute maximum ratings . 8
Bibliography . 9

Table 1 – Operating conditions . 7
Table 2 – Spectral bands . 7
Table A.1 – Typical storage environmental conditions . 8
Table A.2 – Recommended absolute maximum rating items . 8

IEC 62343-1:2019 © IEC 2019 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DYNAMIC MODULES –
Part 1: Performance standards – General conditions

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters ex
...