EN 60794-3-12:2013

SLOVENSKI STANDARD
01-oktober-2013
2SWLþQLNDEOLGHO.DEOL]D]XQDQMRPRQWDåR3RGUREQDVSHFLILNDFLMD]D
RSWLþQHWHOHNRPXQLNDFLMVNHNDEOHYNDQDOLKDOLQHSRVUHGQR]DNRSDQH]DRNDEOMHQMH
SURVWRURY
Optical fibre cables - Part 3-12: Outdoor optical fibre cables - Detailed specification for
duct and directly buried optical telecommunication cables for use in premises cabling
Lichtwellenleiterkabel - Teil 3-12: LWL-Außenkabel - Produktspezifikation für LWL-
Fernmelde-Erd- und Röhrenkabel für anwendungsneutrale Standortverkabelung
Ta slovenski standard je istoveten z: EN 60794-3-12:2013
ICS:
33.180.10 2SWLþQDYODNQDLQNDEOL Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60794-3-12
NORME EUROPÉENNE
June 2013
EUROPÄISCHE NORM
ICS 33.180.10 Supersedes EN 60794-3-12:2006

English version
Optical fibre cables -
Part 3-12: Outdoor cables -
Detailed specification for duct and directly buried optical
telecommunication cables for use in premises cabling
(IEC 60794-3-12:2012)
Câbles à fibres optiques -  Lichtwellenleiterkabel -
Partie 3-12: Câbles extérieurs - Teil 3-12: LWL-Außenkabel -
Spécification particulière pour les câbles Produktspezifikation für LWL-Fernmelde-
optiques de télécommunication destinés à Erd- und Röhrenkabel für
être installés dans des conduites ou à être anwendungsneutrale Standortverkabelung
directement enterrés et utilisés dans le (IEC 60794-3-12:2012)
câblage de locaux
(CEI 60794-3-12:2012)
This European Standard was approved by CENELEC on 2013-01-16. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60794-3-12:2013 E
Foreword
The text of document 86A/1471/FDIS, future edition 2 of IEC 60794-3-12, prepared by SC 86A, "Fibres
and cables", of IEC TC 86, "Fibre optics" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 60794-3-12:2013.
The following dates are fixed:
• latest date by which the document has (dop) 2013-12-28
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-01-16
• latest date by which the national
standards conflicting with the

document have to be withdrawn
This document supersedes EN 60794-3-12:2006.
12:2006:
– reference to ISO/IEC 24702;
– reference to Fibre B6 (EN 60793-2-50);
– reference to Fibre A1a.3 (EN 60793-2-10);
– reference to the OS2 Fibre as defined by ISO/IEC 11801
– reference to the OM4 Fibre as defined by ISO/IEC 11801.
This International Standard is to be used in conjunction with EN 60794-1-1, EN 60794-1-2 and EN 60794-
3-10.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60794-3-12:2012 was approved by CENELEC as a European
Standard without any modification.

- 3 - EN 60794-3-12:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60793-2-10 2011 Optical fibres - EN 60793-2-10 2011
Part 2-10: Product specifications - Sectional
specification for category A1 multimode fibres

IEC 60793-2-50 2012 Optical fibres - EN 60793-2-50 2013
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres

IEC 60794-1-1 - Optical fibre cables - EN 60794-1-1 -
Part 1-1: Generic specification - General

IEC 60794-1-2 - Optical fibre cables - EN 60794-1-2 -
Part 1-2: Generic specification - Basic optical
cable test procedures
IEC 60794-3 - Optical fibre cables - EN 60794-3 -
Part 3: Sectional specification - Outdoor
cables
IEC 60794-3-10 - Optical fibre cables - EN 60794-3-10 -
Part 3-10: Outdoor cables - Family
specification for duct, directly buried and
lashed aerial optical telecommunication
cables
ISO/IEC 11801 - Information technology - - -
Generic cabling for customer premises

ISO/IEC 24702 - Information technology - - -
Generic cabling - Industrial premises

IEC 60794-3-12 ®
Edition 2.0 2012-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Optical fibre cables –
Part 3-12: Outdoor cables – Detailed specification for duct and directly buried

optical telecommunication cables for use in premises cabling

Câbles à fibres optiques –
Partie 3-12: Câbles extérieurs – Spécification particulière pour les câbles

optiques de télécommunication destinés à être installés dans des conduites ou

à être directement enterrés et utilisés dans le câblage de locaux

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX J
ICS 33.180.10 ISBN 978-2-83220-509-9

– 2 – 60794-3-12 © IEC:2012
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 General requirements . 6
4 Particular requirements . 6
4.1 General . 6
4.2 MICE (mechanical, ingress, climatic and chemical and electromagnetic)
characteristics . 6
4.3 Transmission requirements. 7
4.3.1 Attenuation of cabled fibre . 7
4.3.2 Fibre bandwidth requirements . 7
4.3.3 Polarization mode dispersion (PMD) requirements . 8
Bibliography . 9

Table 1 – Multimode maximum cable attenuation coefficient (dB/km) . 7
Table 2 – Single-mode maximum cable attenuation coefficient (dB/km) . 7
Table 3 – Minimum multimode fibre bandwidth (MHz × km) . 8

60794-3-12 © IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL FIBRE CABLES –
Part 3-12: Outdoor cables –
Detailed specification for duct and directly buried optical
telecommunication cables for use in premises cabling

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are
...