iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60317-0-5:1994

(Main)

Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire

Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire

Specifies the general requirements of glass-fibre braided bare and of glass-fibre braided enamelled rectangular copper winding wires.

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-5: Allgemeine Anforderungen - Flachdrähte aus Kupfer, blank oder lackisoliert, umsponnen mit Glasgewebe, imprägniert mit Harz oder Lack

Spécifications pour types particuliers de fils de bobinage - Partie 0-5: Prescriptions générales - Fil de section rectangulaire en cuivre nu ou émaillé recouvert d'une tresse de fibres de verre imprégnées de résine ou de vernis

Spécifie les prescriptions générales pour les fils de bobinage de section rectangulaire en cuivre tressé de fibre de verre et en cuivre émaillé tressé de fibres de verre.

Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire

General Information

Status
Withdrawn
Publication Date
07-Aug-1994
Withdrawal Date
14-Mar-1995
ICS
29.060.10 - Wires
Technical Committee
CLC/TC 55 - Winding wires
Drafting Committee
IEC/TC 55 - IEC_TC_55
Parallel Committee
IEC/TC 55 - IEC_TC_55
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Dec-2009
Completion Date
01-Dec-2009
Ref Project
SIST EN 60317-0-5:2001 - Specifications for particular types of winding wires -- Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire

Relations

Replaced By
EN 60317-0-5:2007 - Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire
Effective Date
29-Jan-2023
Amended By
EN 60317-0-5:1994/A2:2000 - Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire
Effective Date
29-Jan-2023
Amended By
EN 60317-0-5:1994/A1:1998 - Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire
Effective Date
29-Jan-2023

Buy Standard

EN 60317-0-5:2001EN 60317-0-5:2001
PreviousNext
Standard
EN 60317-0-5:2001
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60317-0-5:2001
01-september-2001
Specifications for particular types of winding wires - Part 0-5: General
requirements - Glass-fibre braided resin or varnish impregnated, bare or
enamelled rectangular copper wire
Specifications for particular types of winding wires -- Part 0-5: General requirements -
Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper
wire
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten -- Teil 0-5:
Allgemeine Anforderungen - Flachdrähte aus Kupfer, blank oder lackisoliert, umsponnen
mit Glasgewebe, imprägniert mit Harz oder Lack
Spécifications pour types particuliers de fils de bobinage -- Partie 0-5: Prescriptions
générales - Fil de section rectangulaire en cuivre nu ou émaillé recouvert d'une tresse de
fibres de verre imprégnées de résine ou de vernis
Ta slovenski standard je istoveten z: EN 60317-0-5:1994
ICS:
29.060.10 Žice Wires
SIST EN 60317-0-5:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60317-0-5:2001

---------------------- Page: 2 ----------------------

SIST EN 60317-0-5:2001

---------------------- Page: 3 ----------------------

SIST EN 60317-0-5:2001

---------------------- Page: 4 ----------------------

SIST EN 60317-0-5:2001

---------------------- Page: 5 ----------------------

SIST EN 60317-0-5:2001

---------------------- Page: 6 ----------------------

SIST EN 60317-0-5:2001

---------------------- Page: 7 ----------------------

SIST EN 60317-0
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 60317-67:2017/A1:2024(Amendment)
Specifications for particular types of winding wires - Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105
SIST EN 60317-67:2017/A1:2024
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60851-3:2023(Main)
Winding wires - Test methods - Part 3: Mechanical properties
SIST EN IEC 60851-3:2023

IEC 60851-3:2023 is available as IEC 60851-3:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60851-3: 2023 specifies the following test methods for winding wires: - Test 6: Elongation; - Test 7: Springiness; - Test 8: Flexibility and adherence; - Test 11: Resistance to abrasion; - Test 18: Heat bonding. For definitions, general notes on test methods and the complete series of test methods for winding wires, IEC 60851-1 applies. This document also provides recommended friction test methods in Annex B. This fourth edition cancels and replaces the third edition published in 2009, Amendment 1:2013 and Amendment 2:2019. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Clarification of the distance measurement for determining loss of adhesion in 6.6.3, 6.6.4 for fibre-covered wires and 6.6.5 for tape-wrapped wires.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60317-89:2023(Main)
Specifications for particular types of winding wires - Part 89: Polyesterimide enamelled round aluminum wire, class 200
SIST EN IEC 60317-89:2024

IEC 60317-89:2023 specifies the requirements of enamelled round aluminium winding wire of class 200 with a sole coating based on polyesterimide resin, which can be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor diameters covered by this standard is as follows: grade 1: 0,250 mm up to and including 1,600 mm; grade 2: 0,250 mm up to and including 5,000 mm. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-3:2008 and IEC 60317-0-3:2008/AMD1:2013. This International Standard is to be used in conjunction with IEC 60317-0-3:2008, its Amendment 1 (2013) and its Amendment 2 (2019).

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60317-93:2023(Main)
Specifications for particular types of winding wires - Part 93: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 220
SIST EN IEC 60317-93:2024

IEC 60317-93: 2023 specifies the requirements of enamelled rectangular copper winding wire of class 220 with a dual coating. The underlying coating is based on polyester or polyesterimide resin, which be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is based on polyamide-imide resin. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor dimensions covered by this standard is: width: min. 2,0 mm max. 25,0 mm; thickness: min. 0,80 mm max. 10,0 mm. Wires of grade 1 and grade 2 are included in this specification and apply to the complete range of conductors. The specified combinations of width and thickness as well as the specified width/thickness ratio are given in IEC 60317-0-2. This International Standard is to be used in conjunction with IEC 60317-0-2:2020.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60317-84:2021(Main)
Specifications for particular types of winding wires – Part 84: Polyesterimide enamelled round copper wire, class 200
SIST EN IEC 60317-84:2021

IEC 60317-84:2021 specifies the requirements of enamelled round copper winding wires of class 200 with a sole coating based on polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. NOTE A modified resin is a resin that has undergone a chemical change or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor diameters covered by this document is as follows:  
Grade 1: 0,018 mm up to and including 3,150 mm;
Grade 2: 0,020 mm up to and including 5,000 mm;
Grade 3: 0,0250 mm up to and including 1,600 mm.  The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60851-1:2021(Main)
Winding wires - Test methods - Part 1: General
SIST EN IEC 60851-1:2021

IEC 60851-1:2021 specifies the general notes on methods of test for winding wires. It also gives the definitions for terms used in IEC 60851 (all parts). A survey of the contents of IEC 60851-2 to IEC 60851-6 is given in Annex A. This third edition cancels and replaces the second edition published in 1996, and its amendment 1:2003 and amendment 2:2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
revision to Clause 2 to update the list of normative references;
revision to 3.2 atmospheric conditions for testing;
addition to 3.2 with remarks concerning frequency and management of tests;
revision to Annex A to update the contents list of IEC 60851 series of tests.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60172:2021(Main)
Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
SIST EN IEC 60172:2021

IEC 60172:2020 is available as IEC 60172:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60172:2020 specifies, in accordance with the provisions of IEC 60216-1, a method for evaluating the temperature index of enamelled wire, varnished or unvarnished with an impregnating agent, and of tape wrapped round and rectangular wire, in air at atmospheric pressure by periodically monitoring changes in response to AC proof voltage tests. This procedure does not apply to fibre-insulated wire or wire covered with tapes containing inorganic fibres. NOTE The data obtained according to this test procedure provide the designer and development engineer with information for the selection of winding wire for further evaluation of insulation systems and equipment tests. This fifth edition cancels and replaces the fourth edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - revision of 3.1, definition of thermal index; - revision of 3.3, time to failure; - revisions to 5.1.1 for clarity and to reduce the range wire size range to which the test applies; - revisions to 5.1.2 for tape wrapped round and enamelled or tape wrapped rectangular wire for clarity; - revision to Clause 9 to add the correlation coefficient, r to the report.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60317-60-1:2020(Main)
Specifications for particular types of winding wires - Part 60-1: Polyester glass-fibre wound fused, unvarnished, bare or enamelled rectangular copper wire, temperature index 155
SIST EN IEC 60317-60-1:2020

IEC 60317-60-1: 2020 specifies the requirements of polyester glass-fibre wound fused, unvarnished, bare or grade 1 or grade 2 enamelled rectangular copper winding wires, temperature index 155. NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified. The range of nominal conductor dimensions covered by this document is: width: min. 2,0 mm max. 16,0 mm; thickness: min. 0,80 mm max. 5,60 mm.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60317-82:2020(Main)
Specifications for particular types of winding wires - Part 82: Polyesterimide enamelled rectangular copper wire, class 200
SIST EN IEC 60317-82:2020

IEC 60317-82: 2020 specifies the requirements of enamelled rectangular copper winding wires of class 200 with a sole coating based on polyesterimide resin, which can be modified provided it retains the chemical identity of the original resin and meets all specified wire requirements. NOTE A modified resin is a resin that has undergone a chemical change or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor dimensions covered by this document is:  
width: min. 2,0 mm max. 16,0 mm;
thickness: min. 0,80 mm max. 5,60 mm.  Wires of grade 1 and grade 2 are included in this specification and apply to the complete range of conductors. The specified combinations of width and thickness as well as the specified width/thickness ratio are given in IEC 60317-0-2.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60317-70-2:2020(Main)
Specifications for particular types of winding wires - Part 70-2: Polyester glass-fibre wound resin/varnish impregnated, bare or enamelled round copper wire, temperature index 155
SIST EN IEC 60317-70-2:2020

IEC 60317-70-2:2020 specifies the requirements of polyester glass-fibre wound resin/varnish impregnated bare, grade 1 or grade 2 enamelled round copper winding wires, temperature index 155. The impregnating agent can be, for instance, epoxy, polyester, or polyesterimide resin based. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-10:2017. NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day