Copper and copper alloys - Rod for general purposes

This European Standard specifies the composition, property requirements and dimensional tolerances for copper and copper alloy rod supplied in straight lengths, intended for general purposes. The sampling procedures and the methods of test for verification of conformity to the requirements of this standard are also specified.

Kupfer und Kupferlegierungen - Stangen zur allgemeinen Verwendung

Diese Europäische Norm legt die Zusammensetzung, die Anforderungen an die Eigenschaften und Grenzabmaße für in geraden Längen gelieferte Stangen aus Kupfer und Kupferlegierungen zur allgemeinen Verwendung fest. Der Ablauf der Probenentnahme, die Prüfverfahren zur feststellung der Übereinstimmung mit den Anforderungen der Norm und die Lieferbedingungen sind ebenfalls festgelegt.

Cuivre et alliages de cuivre - Barres pour usages généraux

La présente norme européenne spécifie la composition, les caractéristiques et les tolérances dimensionnelles des barres en cuivre et alliages de cuivre livrées en longueurs droites, destinés à des usages généraux. Les procédures d'échantillonnage et les méthodes d'essai pour la vérification de la conformité aux prescriptions de la présente norme sont également spécifiées.

Baker in bakrove zlitine - Palice za splošno uporabo

General Information

Status
Withdrawn
Publication Date
20-Jan-1998
Withdrawal Date
31-May-2011
ICS
77.150.30 - Copper products
Technical Committee
CEN/TC 133 - Copper and copper alloys
Drafting Committee
CEN/TC 133/WG 4 - Extruded and drawn products, forgings and scrap
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Jun-2011
Completion Date
01-Jun-2011
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/131 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on pipes, tanks and ancillaries, not in contact with water intended for human consumption
Ref Project
SIST EN 12163:1998 - Copper and copper alloys - Rod for general purposes

Relations

Replaced By
EN 12163:2011 - Copper and copper alloys - Rod for general purposes
Effective Date
28-May-2011
Referred By
EN 12516-4:2008 - Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
Effective Date
28-Jan-2026
Referred By
EN 12288:2010 - Industrial valves - Copper alloy gate valves
Effective Date
28-Jan-2026

Frequently Asked Questions

EN 12163:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Copper and copper alloys - Rod for general purposes". This standard covers: This European Standard specifies the composition, property requirements and dimensional tolerances for copper and copper alloy rod supplied in straight lengths, intended for general purposes. The sampling procedures and the methods of test for verification of conformity to the requirements of this standard are also specified.

This European Standard specifies the composition, property requirements and dimensional tolerances for copper and copper alloy rod supplied in straight lengths, intended for general purposes. The sampling procedures and the methods of test for verification of conformity to the requirements of this standard are also specified.

EN 12163:1998 is classified under the following ICS (International Classification for Standards) categories: 77.150.30 - Copper products. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 12163:1998 has the following relationships with other standards: It is inter standard links to EN 12163:2011, EN 12516-4:2008, EN 12288:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 12163:1998 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/131. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 12163:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baker in bakrove zlitine - Palice za splošno uporaboKupfer und Kupferlegierungen - Stangen zur allgemeinen VerwendungCuivre et alliages de cuivre - Barres pour usages générauxCopper and copper alloys - Rod for general purposes77.150.30Bakreni izdelkiCopper productsICS:Ta slovenski standard je istoveten z:EN 12163:1998SIST EN 12163:1998en01-november-1998SIST EN 12163:1998SLOVENSKI
STANDARD
SIST EN 12
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...