EN 1426:1999
(Main)Bitumen and bituminous binders - Determination of needle penetration
Bitumen and bituminous binders - Determination of needle penetration
This European Standard specifies a method for determining the consistency of bituminous binders. A normal procedure is described for penetrations up to 500 x 0,1 mm, but for penetrations above this value, different operating parameters are necessary. WARNING: The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Nadelpenetration
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Konsistenz von Bitumen und bitumenhaltigen Bindemitteln fest. Das übliche Verfahren ist zur Messung von Penetrationen bis höchstens 500 x 0,1 mm beschrieben, wenn Penetrationen über diesen Wert erwartert werden, sind abweichende Prüfparameter erforderlich. WARNUNG: Die Anwendung dieser Norm kann gefährliche Substanzen, Arbeitsgänge und Ausrüstung einschließen. In der Norm werden nicht alle Sicherheitsprobleme angesprochen, die mit ihrer Anwendung verbunden sind.
Bitumes et liants bitumineux - Détermination de la pénétrabilité à l'aiguille
La présente norme européenne définit une méthode pour la détermination de la consistance des liants bitumineux. Le mode opératoire courant s'applique pour les pénétrations inférieures ou égales à 500 x 0,1 mm. Pour les pénétrations supérieures à cette valeur, des conditions opératoires différentes sont prévues. AVERTISSEMENT: L'utilisation de la présente Norme européenne implique l'intervention de produits, d'opérations et d'équipements à caractères dangereux. La présente norme européenne n'est pas censée aborder tous les problémes de sécurité concernés par son usage.
Bitumen in bitumenska veziva - Določevanje penetracije igle
General Information
- Status
- Withdrawn
- Publication Date
- 19-Oct-1999
- Withdrawal Date
- 13-Mar-2007
- Technical Committee
- CEN/TC 336 - Bituminous binders
- Drafting Committee
- CEN/TC 336 - Bituminous binders
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 14-Mar-2007
- Completion Date
- 14-Mar-2007
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
ABS Quality Evaluations Inc.
American Bureau of Shipping quality certification.
Element Materials Technology
Materials testing and product certification.
ICC Evaluation Service
Building products evaluation and certification.
Sponsored listings
Frequently Asked Questions
EN 1426:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Bitumen and bituminous binders - Determination of needle penetration". This standard covers: This European Standard specifies a method for determining the consistency of bituminous binders. A normal procedure is described for penetrations up to 500 x 0,1 mm, but for penetrations above this value, different operating parameters are necessary. WARNING: The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
This European Standard specifies a method for determining the consistency of bituminous binders. A normal procedure is described for penetrations up to 500 x 0,1 mm, but for penetrations above this value, different operating parameters are necessary. WARNING: The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
EN 1426:1999 is classified under the following ICS (International Classification for Standards) categories: 75.140 - Waxes, bituminous materials and other petroleum products; 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1426:1999 has the following relationships with other standards: It is inter standard links to EN 1426:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1426:1999 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/124. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1426:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2000
%LWXPHQLQELWXPHQVNDYH]LYD'RORþHYDQMHSHQHWUDFLMHLJOH
Bitumen and bituminous binders - Determination of needle penetration
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Nadelpenetration
Bitumes et liants bitumineux - Détermination de la pénétrabilité a l'aiguille
Ta slovenski standard je istoveten z: EN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...