EN 13230-4:2016/prA1

SLOVENSKI STANDARD
01-februar-2019
äHOH]QLãNHQDSUDYH=JRUQMLXVWURMSURJH%HWRQVNLSUDJLLQNUHWQLãNLEHWRQVNL
SUDJLGHO3UHGQDSHWLEHWRQVNLSUDJL]DNUHWQLFHLQNULåLãþD'RSROQLOR$
Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed
bearers for switches and crossings
Bahnanwendungen - Oberbau - Gleis- und Weichenschwellen aus Beton - Teil 4:
Spannbetonschwellen für Weichen und Kreuzungen
Applications ferroviaires - Voie - Traverses et supports en béton - Partie 4 : Supports
précontraints pour appareil de voie
Ta slovenski standard je istoveten z: EN 13230-4:2016/prA1
ICS:
45.080 7UDþQLFHLQåHOH]QLãNLGHOL Rails and railway
components
91.100.30 Beton in betonski izdelki Concrete and concrete
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 13230-4:2016
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
November 2018
ICS 91.100.30; 93.100
English Version
Railway applications - Track - Concrete sleepers and
bearers - Part 4: Prestressed bearers for switches and
crossings
Applications ferroviaires - Voie - Traverses et supports Bahnanwendungen - Oberbau - Gleis- und
en béton - Partie 4 : Supports précontraints pour Weichenschwellen aus Beton - Teil 4:
appareil de voie Spannbetonschwellen für Weichen und Kreuzungen
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 13230-4:2016. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13230-4:2016/prA1:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Modification to Annex ZA (informative), Relationship between thi
...