EN 1636-3:1997
(Main)Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings
Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings
This part of prEN 1636 specifies the characteristics of fittings made from glass-reinforced thermosetting plastics pipes or moulded based on unsaturated polyester resin (GRP-UP) intended to be used for non-pressure drainage and sewerage. It also specifies the test parameters for the test methods referred to in this standard. It is applicable to fittings intended to be used for the conveyance of surface water or sewage, below ground, outside buildings, at temperatures up to 50 oC.
Kunststoff-Rohrleitungssysteme für drucklose Entwässerungs- und Abwasserleitungen - Glasfaserverstärkte duroplastische Kunststoffe (GFK) auf der Basis von ungesättigtem Polyesterharz (UP) - Teil 3: Formstücke
Dieser Teil der prEN 1636 legt die Charakteristika von Formstücken, die aus glasfaserverstärkten duroplastischen Kunststoffen auf der Basis von ungesättigtem Polyesterharz (GFK-UP) hergestellt sind, im Bereich von drucklosen Entwässerungs- und Abwasserleitungen fest. Er legt auch die Prüfparameter für Prüfverfahren fest, auf die in dieser Norm verwiesen wird. Er ist anwendbar auf Formstücke, die für den unterirdischen Transport von Oberflächenwasser und Abwasser bis zu Temperaturen von 50 °C vorgesehen sind.
Systèmes de canalisations en plastique pour l'évacuation et l'assainissement sans pression - Plastiques thermodurcissables renforcés de verre (PRV) à base de résine de polyester non saturé (UP) - Partie 3: Raccords
La présente partie de la prEN 1636 prescrit les caractéristiques des raccords réalisés à partir de tubes en plastiques thermodurcissables renforcés de verre ou moulés à base de résine de polyester non saturé (PRV-UP) et destinés à l'évacuation et l'assainissement sans pression. Elle précise aussi les paramètres d'essai pour les méthodes d'essai dont il est fait mention dans la présente norme.
Cevni sistemi iz polimernih materialov za odpadno vodo in kanalizacijo, ki delujejo po težnostnem principu - S steklenimi vlakni okrepljeni duromerni materiali (GRP), ki temeljijo na nenasičeni poliestrski smoli (UP) - 3. del: Fitingi
General Information
- Status
- Withdrawn
- Publication Date
- 19-Aug-1997
- Withdrawal Date
- 04-Apr-2006
- Technical Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 05-Apr-2006
- Completion Date
- 05-Apr-2006
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 1636-3:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings". This standard covers: This part of prEN 1636 specifies the characteristics of fittings made from glass-reinforced thermosetting plastics pipes or moulded based on unsaturated polyester resin (GRP-UP) intended to be used for non-pressure drainage and sewerage. It also specifies the test parameters for the test methods referred to in this standard. It is applicable to fittings intended to be used for the conveyance of surface water or sewage, below ground, outside buildings, at temperatures up to 50 oC.
This part of prEN 1636 specifies the characteristics of fittings made from glass-reinforced thermosetting plastics pipes or moulded based on unsaturated polyester resin (GRP-UP) intended to be used for non-pressure drainage and sewerage. It also specifies the test parameters for the test methods referred to in this standard. It is applicable to fittings intended to be used for the conveyance of surface water or sewage, below ground, outside buildings, at temperatures up to 50 oC.
EN 1636-3:1997 is classified under the following ICS (International Classification for Standards) categories: 23.040.45 - Plastics fittings. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1636-3:1997 has the following relationships with other standards: It is inter standard links to EN 14364:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1636-3:1997 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1636-3:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.JLKunststoff-Rohrleitungssysteme für drucklose Entwässerungs- und Abwasserleitungen - Glasfaserverstärkte duroplastische Kunststoffe (GFK) auf der Basis von ungesättigtem Polyesterharz (UP) - Teil 3: FormstückeSystemes de canalisations en plastique pour l'évacuation et l'assainissement sans pression - Plastiques thermodurcissables renforcés de verre (PRV) a base de résine de polyester non saturé (UP) - Partie 3: RaccordsPlastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings93.030Zunanji sistemi za odpadno vodoExternal sewage systems23.040.45
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...