EN 13399:2010
(Main)Bitumen and bituminous binders - Determination of storage stability of modified bitumen
Bitumen and bituminous binders - Determination of storage stability of modified bitumen
This European Standard specifies a method for measuring the storage stability at high temperatures.
NOTE Modified bitumen and, in particular, polymer-modified bitumen, which consist of mainly bitumen and at least one additional agent, are known to display phase separation under certain conditions.
WARNING — The use of this European Standard can involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Lagerbeständigkeit von modifiziertem Bitumen
Diese Europäische Norm legt ein Verfahren zum Messen der Lagerbeständigkeit bei hohen Temperaturen fest.
ANMERKUNG Es ist bekannt, dass modifiziertes Bitumen und besonders mit Polymeren modifiziertes Bitumen, das vorwiegend aus Bitumen und mindestens einem zusätzlichen Bestandteil besteht, unter bestimmten Bedingungen Pha¬sentrennung zeigt.
WARNUNG — Die Anwendung dieser Europäischen Norm kann den Umgang mit gefährlichen Sub-stanzen und Ausrüstungsteilen und die Ausführung gefährlicher Arbeitsgänge einschließen. Diese Europäische Norm erhebt nicht den Anspruch, alle mit ihrer Anwendung verbundenen Sicherheitspro-bleme anzusprechen. Es liegt in der Verantwortung des Anwenders dieser Europäischen Norm, geeig-nete Verhaltensregeln zur Sicherheit und Gesundheit festzulegen und vor der Anwendung zu klären, ob einschränkende Vorschriften zu berücksichtigen sind.
Bitumes et liants bitumineux - Détermination de la stabilité au stockage des bitumes modifiés
La présente norme européenne prescrit une méthode permettant de mesurer la stabilité au stockage à des
températures élevées.
NOTE Les bitumes modifiés, et plus particulièrement les bitumes modifiés par des polymères, qui contiennent
principalement du bitume et au moins un agent additivé, sont connus pour présenter une séparation de phases dans
certaines conditions.
AVERTISSEMENT — L'utilisation de la présente Norme européenne implique l'intervention de produits,
d'opérations et d'équipements à caractère dangereux. La présente Norme européenne n'est pas
censée aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de
l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer
l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določevanje stabilnosti modificiranih bitumnov pri skladiščenju
Ta evropski standard določa metodo za merjenje stabilnost skladiščenja pri visokih temperaturah.
General Information
- Status
- Withdrawn
- Publication Date
- 25-May-2010
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 336 - Bituminous binders
- Drafting Committee
- CEN/TC 336/WG 1 - Bituminous binders for paving
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 06-Dec-2017
- Completion Date
- 28-Jan-2026
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-May-2010
- Effective Date
- 13-Dec-2017
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Kiwa BDA Testing
Building and construction product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
EN 13399:2010 is a standard published by the European Committee for Standardization (CEN). Its full title is "Bitumen and bituminous binders - Determination of storage stability of modified bitumen". This standard covers: This European Standard specifies a method for measuring the storage stability at high temperatures. NOTE Modified bitumen and, in particular, polymer-modified bitumen, which consist of mainly bitumen and at least one additional agent, are known to display phase separation under certain conditions. WARNING — The use of this European Standard can involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
This European Standard specifies a method for measuring the storage stability at high temperatures. NOTE Modified bitumen and, in particular, polymer-modified bitumen, which consist of mainly bitumen and at least one additional agent, are known to display phase separation under certain conditions. WARNING — The use of this European Standard can involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
EN 13399:2010 is classified under the following ICS (International Classification for Standards) categories: 75.140 - Waxes, bituminous materials and other petroleum products; 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13399:2010 has the following relationships with other standards: It is inter standard links to EN 13399:2003, EN 13399:2017, EN 58:2012, EN 12594:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13399:2010 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13399:2010 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VNODGLãþHQMXBitumen und bitumenhaltige Bindemittel - Bestimmung der Lagerbeständigkeit von modifiziertem BitumenBitumes et liants bitumineux - Détermination de la stabilité au stockage des bitumes modifiésBitumen and bituminous binders - Determination of storage stability of modified bitumen91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13399:2010SIST EN 13399:2010en,fr,de01-oktober-2010SIST EN 13399:2010SLOVENSKI
STANDARDSIST EN 13399:20041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13399
May 2010 ICS 75.140; 91.100.50 Supersedes EN 13399:2003English Version
Bitumen and bituminous binders - Determination of storage stability of modified bitumen
Bitumes et liants bitumineux - Détermination de la stabilité au stockage des bitumes modifiés
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Lagerbeständigkeit von modifiziertem Bitumen This European Standard was approved by CEN on 23 April 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13399:2010: ESIST EN 13399:2010
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...