EN 4604-009:2017

SLOVENSKI STANDARD
01-maj-2017
1DGRPHãþD
SIST EN 4604-009:2014
$HURQDYWLND.DEOLHOHNWULþQL]DSUHQRVVLJQDODGHO.DEOLNRDNVLDOQLODKNL
RKPRYƒ&WLS.:ODKNL:16WDQGDUG]DSURL]YRG
Aerospace series - Cable, electrical, for signal transmission - Part 009: Cable, coaxial,
light weight, 50 ohms, 180 °C, type KW (light WN) - Product standard
Luft- und Raumfahrt - Elektrische Leitungen für Signalübertragungen - Teil 009:
Koaxialkabel, Leichtbauweise, 50 Ohm, 180 °C, Typ KW (WN Leichtbauweise) -
Produktnorm
Série aérospatiale - Câbles électriques pour transmission de signaux - Partie 009 :
Câble, coaxial, allégé 50 ohms, 180 °C, type KW (WN allégé) - Norme de produit
Ta slovenski standard je istoveten z: EN 4604-009:2017
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4604-009
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2017
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 4604-009:2014
English Version
Aerospace series - Cable, electrical, for signal transmission
- Part 009: Cable, coaxial, light weight, 50 ohms, 180 °C,
type KW (light WN) - Product standard
Série aérospatiale - Câbles électriques pour Luft- und Raumfahrt - Elektrische Leitungen für
transmission de signaux - Partie 009 : Câble, coaxial, Signalübertragungen - Teil 009: Koaxialkabel,
allégé 50 ohms, 180 °C, type KW (WN allégé) - Norme Leichtbauweise, 50 Ohm, 180 °C, Typ KW (WN
de produit Leichtbauweise) - Produktnorm
This European Standard was approved by CEN on 24 September 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4604-009:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
5 Quality assurance . 11
6 Designation. 12
7 Identification and marking . 12
8 Colours of components and jacket . 12
9 Packaging, labelling and delivery lengths . 12
10 Technical specification . 12

European foreword
This document (EN 4604-009:2017) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2017, and conflicting national standards shall
be withdrawn at the latest by September 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 4604-009:2014.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
1 Scope
This European Standard specifies the required characteristics of a light weight coaxial cable, 50 Ω,
type KW for use in aircraft electrical systems at operating temperature between −55 °C and 180 °C and
specially for high frequency up to 6 GHz. Nevertheless, if needed, −65 °C is also acceptable as shown by
rapid change of temperature test.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 3475-100 (all parts), Aerospace series — Cables, electrical, aircraft use — Test methods — Part 100:
General
EN 4434, Aerospace series — Copper or copper alloy lightweight conductors for electrical cables — Product
standard (Normal and tight tolerances)
EN 4604-001, Aerospace series — Cable, electrical, for signal transmission — Part 001: Technical
specification
EN 4604-002, Aerospace series — Cable, electrical, for signal transmission — Part 002: General
1)
TR 6058, Aerospace series — Cable code identification list
2)
ASTM-B566, Standard specification for copper-clad aluminium wire
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 3475-100 and the following
apply.
3.1
Epsilon (ε)
value of dielectric constant
4 Required characteristics
4.1 Material, construct
...