EN ISO 10276:2021

SLOVENSKI STANDARD
01-oktober-2021
Jedrska energija - Tehnologija goriv - Ovojni sistemi za pakete, ki se uporabljajo za
prevoz radioaktivnih snovi (ISO 10276:2019)
Nuclear energy - Fuel technology - Trunnion systems for packages used to transport
radioactive material (ISO 10276:2019)
Kerntechnik - Brennstofftechnologie - Lastanschlagpunkte für Transportbehälter für
abgebrannte Brennstoffelemente (ISO 10276:2019)
Énergie nucléaire - Technologie du combustible - Systèmes de tourillons pour colis de
transport de matières radioactives (ISO 10276:2019)
Ta slovenski standard je istoveten z: EN ISO 10276:2021
ICS:
27.120.30 Cepljivi materiali in jedrska Fissile materials and nuclear
gorivna tehnologija fuel technology
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 10276
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2021
EUROPÄISCHE NORM
ICS 27.120.30
English Version
Nuclear energy - Fuel technology - Trunnion systems for
packages used to transport radioactive material (ISO
10276:2019)
Énergie nucléaire - Technologie du combustible - Kerntechnik - Brennstofftechnologie -
Systèmes de tourillons pour colis de transport de Tragzapfensysteme für Transportbehälter für
matières radioactives (ISO 10276:2019) radioaktives Material (ISO 10276:2019)
This European Standard was approved by CEN on 25 July 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10276:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO 10276:2019 has been prepared by Technical Committee ISO/TC 85 "Nuclear energy,
nuclear technologies, and radiological protection” of the International Organization for Standardization
(ISO) and has been taken over as EN ISO 10276:2021 by Technical Committee CEN/TC 430 “Nuclear
energy, nuclear technologies, and radiological protection” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2022, and conflicting national standards
shall be withdrawn at the latest by February 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10276:2019 has been approved by CEN as EN ISO 10276:2021 without any modification.

INTERNATIONAL ISO
STANDARD 10276
Second edition
2019-12
Nuclear energy — Fuel technology —
Trunnion systems for packages used
to transport radioactive material
Énergie nucléaire — Technologie du combustible — Systèmes de
tourillons pour colis de transport de matières radioactives
Reference number
ISO 10276:2019(E)
©
ISO 2019
ISO 10276:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 10276:2019(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms, abbreviated terms, symbols and definitions . 1
3.1 Terms and definitions . 1
3.2 Symbols . 4
3.3 Abbreviations . 4
4 Regulatory requirements . 4
4.1 General . 4
4.2 Relevant regulations. 4
5 Design . 4
5.1 General . 4
5.2 Design methodology. 6
5.3 Materials . 6
5.3.1 Material selection . 6
5.3.2 Mechanical properties . 7
5.4 Design loads . 7
5.4.1 Assembly state . 7
5.4.2 Tie-down . 8
5.4.3 Lifting and/or tilting . . 9
5.4.4 Load cycles for fatigue analysis . 9
5.5 Methods of analysis and design criteria .10
5.5.1 General.10
5.5.2 Strength analysis using analytical methods .10
5.5.3 Strength analysis using FEA methods .11
5.5.4 Brittle fracture evaluation .12
5.5.5 Fatigue analysis .12
5.6 Other requirements and recommendations .12
6 Manufacture .13
6.1 General .13
6.2 Assembly .14
6.3 Inspection during manufacture and assembly .14
6.3.1 Dimensional and visual inspection .14
6.3.2 Non-destructive examination .14
6.4 Testing during manufacture and assembly .15
6.4.1 Scope of testing .15
6.4.2 Chemical analysis .15
6.4.3 Mechanical testing of material properties .15
6.4.4 Static testing .16
7 Maintenance .17
7.1 General .17
7.2 Maintenance schedule .17
7.3 Periodic inspection .
...