EN ISO 13628-8:2006

SLOVENSKI STANDARD
01-maj-2007
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD1DþUWRYDQMHLQGHORYDQMH
SRGYRGQLKSURL]YRGQLKVLVWHPRYGHO9PHVQLNLGDOMLQVNRYRGHQLKYR]LO529
]DXSRUDERYSRGYRGQLKSURL]YRGQLKVLVWHPLK,62
Petroleum and natural gas industries - Design and operation of subsea production
systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production
systems (ISO 13628-8:2002)
Erdöl- und Erdgasindustrie - Konstruktion und Betrieb von Unterwasser-
Produktionssystemen - Teil 8: Schnittstellen ferngelenkter Fahrzeuge (ROV) mit
Unterwasser-Produktionssystemen (ISO 13628-8:2002)
Industries du pétrole et du gaz naturel - Conception et exploitation des systemes de
production immergés - Partie 8: Véhicules commandés a distance pour l'interface avec

les matériels immergés (ISO 13628-8:2002)
Ta slovenski standard je istoveten z: EN ISO 13628-8:2006
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 13628-8
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2006
ICS 75.180.10
English Version
Petroleum and natural gas industries - Design and operation of
subsea production systems - Part 8: Remotely Operated Vehicle
(ROV) interfaces on subsea production systems (ISO 13628-
8:2002)
Industries du pétrole et du gaz naturel - Conception et Erdöl- und Erdgasindustrie - Konstruktion und Betrieb von
exploitation des systèmes de production immergés - Partie Unterwasser-Produktionssystemen - Teil 8: Schnittstellen
8: Véhicules commandés à distance pour l'interface avec ferngelenkter Fahrzeuge (ROV) mit Unterwasser-
les matériels immergés (ISO 13628-8:2002) Produktionssystemen (ISO 13628-8:2002)
This European Standard was approved by CEN on 13 November 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13628-8:2006: E
worldwide for CEN national Members.

Foreword
The text of ISO 13628-8:2002 has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 13628-
8:2006 by Technical Committee CEN/TC 12 "Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries", the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2007, and conflicting national
standards shall be withdrawn at the latest by June 2007.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 13628-8:2002 has been approved by CEN as EN ISO 13628-8:2006 without any
modifications.
INTERNATIONAL ISO
STANDARD 13628-8
First edition
2002-12-15
Petroleum and natural gas industries —
Design and operation of subsea
production systems —
Part 8:
Remotely Operated Vehicle (ROV)
interfaces on subsea production systems
Industries du pétrole et du gaz naturel — Conception et exploitation
des systèmes de production immergés —
Partie 8: Véhicules commandés à distance pour l'interface avec
les matériels immergés
Reference number
ISO 13628-8:2002(E)
©
ISO 2002
ISO 13628-8:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

© ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2002 — All rights reserved

ISO 13628-8:2002(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope. 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 1
3.1 Terms and definitions. 1
3.2 Abbreviated terms. 2
4 Intervention philosophy and functional requirements. 2
4.1 General. 2
4.2 Intervention by ROV. 3
4.3 ROV intervention task configurations . 4
4.4 Subsea facilities system design. 10
5 Design performance . 13
5.1 General. 13
5.2 Materials. 13
5.3 Load capability. 13
5.4 Operating force or torque. 13
5.5 Lifting devices . 13
5.6 Quality control. 13
5.7 Temperature ratings . 14
5.8 Colours and marking . 14
6 Design considerations. 14
6.1 General. 14
6.2 Conceptual design. 14
6.3 Detailed design. 16
6.4 Desired design features . 18
6.5 Undesirable design features. 20
7 ROV interfaces and subsea systems . 21
8 Operational considerations . 24
9 Indicator systems. 24
10 Material selection. 25
10.1 General. 25
10.2 Selection criteria . 25
11 Documentation . 25
11.1 General. 25
11.2 Equipment design. 26
11.3 Testing. 26
11.4 Information feedback. 26
12 ROV interfaces . 26
12.1 General. 26
12.2 Stabilization . 26
12.3 Handles for use with manipulators . 32
12.4 Handles for use with TDUs. 34
12.5 Rotary (low torque) interface . 35
12.6 Rotary (high-torque) interface . 37
12.7 Linear (push) interface — Types A and C.38
ISO 13628-8:2002(E)
12.8 Linear (push) interface type B.41
12.9 Rotary docking .42
12.10 Hot stab hydraulic connection type A — 69,0 MPa (10 000 psi) working pressure.45
12.11 Hot stab hydraulic connection type B.46
12.12 Rotary fluid coupling.49
12.13 CCO interface.51
12.14 Lifting mandrels.
...