prEN 17988-3
(Main)Circular design of fishing gear and aquaculture equipment - Part 3: Technical requirements and guidelines
Circular design of fishing gear and aquaculture equipment - Part 3: Technical requirements and guidelines
This document specifies technical requirements and recommendations for the
components of fishing gear and aquaculture equipment containing plastics.
This document establishes the material principles and processes that enhance
the circularity and recycling of components and the materials comprising the
components, taking into account the impact of such requirements on utility.
The technical requirements for the design of fishing gear and aquaculture
equipment focus on:
- Development and selection of materials and components;
- Manufacture, assembly and disassembly;
- Use and maintenance;
- Repair, re-manufacturing and refurbishment;
- Storage, transport; and
- End-of-life including recycling.
This document excludes design aspects related to enhancement of the
capture of fisheries.
Kreislaufwirtschaft von Fischfanggeräten und Aquakulturausrüstungen - Teil 3: Technische Anforderungen
Dieses Dokument legt die technischen Anforderungen an Komponenten von Fischfanggeräten und Aquakulturausrüstungen (im Folgenden als „Fanggeräte“ bezeichnet) fest, die Kunststoffe enthalten. Es legt die wesentlichen Grundsätze und Prozesse fest, die die Kreislauffähigkeit und das Recycling der Kunststoffkomponenten von Fanggeräten und der Materialien, aus denen die Komponenten des Fanggeräts bestehen, verbessern, wobei die Auswirkungen solcher Anforderungen auf den Gebrauch der Fanggeräte berücksichtigt werden. Die technischen Anforderungen für das Design von Fanggeräten konzentrieren sich auf folgende Elemente:
Entwicklung und Auswahl von Materialien und Komponenten;
Verringerung der Verwendung von Kunststoff-Neumaterial;
Herstellung/Zusammenbau/Zerlegung;
Nutzung, Wartung, Reparatur, Wiederaufbereitung und Aufarbeitung;
Lagerung, Transport; und
Ende der Nutzungsdauer einschließlich Recycling und Upcycling.
Ausgenommen von diesem Dokument sind Gestaltungsaspekte im Zusammenhang mit der Verbesserung der Erfassung von Fischereien. Es sei denn, ein solches Design reduziert den Nutzen des Fanggeräts für die Fang- oder Aquakulturtechniken oder das Management.
Krožna zasnova ribolovnega orodja in opreme za ribogojstvo - 3. del: Tehnične zahteve
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 17988-3:2023
01-september-2023
Krožna zasnova ribolovnega orodja in opreme za ribogojstvo - 3. del: Tehnične
zahteve
Circular design of fishing gear and aquaculture equipment - Part 3: Technical
requirements
Kreislaufwirtschaft von Fischfanggeräten und Aquakulturausrüstungen - Teil 3:
Technische Anforderungen
Ta slovenski standard je istoveten z: prEN 17988-3
ICS:
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
65.150 Ribolov in ribogojstvo Fishing and fish breeding
oSIST prEN 17988-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17988-3:2023
---------------------- Page: 2 ----------------------
oSIST prEN 17988-3:2023
DRAFT
EUROPEAN STANDARD
prEN 17988-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2023
ICS
English Version
Circular design of fishing gear and aquaculture equipment
- Part 3: Technical requirements
Technische Anforderungen an kreislauforientiertes
Design von Fischfanggeräten
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 466.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17988-3:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17988-3:2023
prEN 17988-3:2023 (E)
Contents Page
Introduction . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Gear performance . 6
5 Innovation . 8
6 Logistics . 9
7 Using materials . 9
7.1 Mixed materials . 9
7.2 Multi-material . 9
Bibliography .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.