prEN 6049-004

SLOVENSKI STANDARD
01-december-2022
Aeronavtika - Električni kabli, namestitev - Zaščitna obojka iz metaaramidnih
vlaken - 004. del: Opletena, cevasta, dobro raztegljiva - Standard za proizvod
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres
- Part 004: Braided, tubular, high expandable - Product standard
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-
Aramidfasern - Teil 004: Geflecht, röhrenförmig, hochdehnbar - Produktnorm
Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-
aramides - Partie 004 : Tresse, tubulaire, très expansible - Norme de produit
Ta slovenski standard je istoveten z: prEN 6049-004
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2022
ICS 49.060 Will supersede EN 6049-004:2019
English Version
Aerospace series - Electrical cables, installation -
Protection sleeve in meta-aramid fibres - Part 004:
Braided, tubular, high expandable - Product standard
Série aérospatiale - Câbles électriques, installation - Luft- und Raumfahrt - Elektrische Leitungen,
Gaine de protection en fibres méta-aramides - Partie Installation - Schutzschläuche aus Meta-Aramidfasern -
004 : Tresse, tubulaire, très expansible - Norme de Teil 004: Geflecht, röhrenförmig, hochdehnbar -
produit Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 6049-004:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Required characteristics . 5
4.1 Composition, dimensions and mass . 5
4.1.1 Composition of the tows . 5
4.1.2 Composition, dimensions and mass of the sleeve . 5
4.2 Colour and materials . 7
4.2.1 Colour . 7
4.2.2 Materials . 7
4.3 Mechanical properties . 7
4.3.1 Sun light exposure . 7
4.3.2 Temperature range . 7
4.3.3 Resistance to fluids . 7
4.3.4 Water absorption . 7
4.3.5 Mould growth . 7
4.3.6 Tensile strength of tows . 7
5 Test methods . 7
6 Designation . 9
7 Marking . 9

European foreword
This document (prEN 6049-004:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 6049-004:2019.
1 Scope
This document defines the characteristics of high expandable braided tubular mechanical protection
sleeves for electrical cable and cable bundles made from meta-aramid fibres and provided with a water
repelled protection.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited
...