prEN 13763-1
(Main)Explosives for civil uses - Detonators and detonating cord relays - Part 1: Requirements
Explosives for civil uses - Detonators and detonating cord relays - Part 1: Requirements
This document specifies the requirements for electric detonators, non-electric detonators, plain detonators, electronic detonators, electronic initiation systems, surface connectors, leading wires, shock tubes, coupling accessories and detonating cord relays.
This document specifies classification for electric detonators.
This document does not cover devices and accessories for reliable and safe function of detonators and relays; for this, see EN 13763 26:2004.
Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 1: Anforderungen
Dieses Dokument legt die Anforderungen an elektrische Zünder, nicht-elektrische Zünder, Sprengkapseln, elektronische Zünder, elektronische Zündsysteme, Oberflächenverbinder, Zünderdrähte, Zündschläuche, Verbinder und Sprengschnurverzögerer fest.
Dieses Dokument legt die Klassifizierung von elektrischen Zündern fest.
Dieses Dokument behandelt keine Geräte und Zubehörteile, die für die zuverlässige und sichere Funktionsweise von Zündern und Verzögerungselementen zuständig sind; hierzu siehe EN 13763 26:2004.
Explosifs à usage civil - Détonateurs et relais pour cordeau détonant - Partie 1 : Exigences
Le présent document spécifie les exigences relatives aux détonateurs électriques et non électriques, aux charges de détonateurs, aux détonateurs électroniques, aux systèmes d’amorçage électronique, aux connecteurs de surface, aux fils d’amorce, aux tubes à transmission d’ondes de choc, aux manchons d’accouplement et aux relais pour cordeau détonant.
Il spécifie également la classification des connecteurs électriques.
Le présent document ne couvre pas les dispositifs et les accessoires pour la fiabilité et la sécurité de fonctionnement des détonateurs et des relais (voir l’EN 13763 26:2004).
Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 1. del: Zahteve
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 13763-1:2021
01-november-2021
Nadomešča:
SIST EN 13763-1:2004
Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 1. del: Zahteve
Explosives for civil uses - Detonators and relays - Part 1: Requirements
Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 1:
Anforderungen
Explosifs à usage civil - Détonateurs et relais - Partie 1 : Exigences
Ta slovenski standard je istoveten z: prEN 13763-1
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
oSIST prEN 13763-1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13763-1:2021
---------------------- Page: 2 ----------------------
oSIST prEN 13763-1:2021
DRAFT
EUROPEAN STANDARD
prEN 13763-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2021
ICS 71.100.30 Will supersede EN 13763-1:2004
English Version
Explosives for civil uses - Detonators and detonating cord
relays - Part 1: Requirements
Explosifs à usage civil - Détonateurs et relais - Partie 1 : Explosivstoffe für zivile Zwecke - Zünder und
Exigences Verzögerungselemente - Teil 1: Anforderungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 321.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13763-1:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13763-1:2021
prEN 13763-1:2021 (E)
Contents Page
European foreword . 3
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Requirements . 8
4.1 General. 8
4.2 Thermal stability at elevated temperatures . 12
4.3 Sensitiveness to impact . 12
4.4 Resistance to abrasion . 12
4.5 Resistance to cutting damage . 13
4.6 Resistance to cracking of insulation in low temperatures . 13
4.7 Mechanical strength . 13
4.8 Resistance to vibr
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.