EN 13558:2003

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Spezifizierung von schlagzäh-modifizierten extrudierten Acrylplatten für Duschwannen für den HausgebrauchSpécifications relatives aux feuilles en acrylique extrudées a résistance au choc modifiée pour receveurs de douche a usage domestiqueSpecifications for impact modified extruded acrylic sheets for shower trays for domestic purposes91.140.70Sanitarne napraveSanitary installationsICS:Ta slovenski standard je istoveten z:EN 13558:2003SIST EN 13558:2004en01-maj-2004SIST EN 13558:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13558September 2003ICS 91.140.70English versionSpecifications for impact modified extruded acrylic sheets forshower trays for domestic purposesSpécifications relatives aux feuilles en acrylique extrudéesà résistance au choc modifiée pour receveurs de douche àusage domestiqueSpezifizierung von schlagzäh-modifizierten extrudiertenAcrylplatten für Duschwannen für den HausgebrauchThis European Standard was approved by CEN on 27 June 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13558:2003 ESIST EN 13558:2004

3%.4.3 Heavy metal contentsLimit values for heavy metal contents of impact modified extruded sheets for shower trays are given in theEuropean Directive 91/338/EEC.Informative note : 91/338/CEE: Council Directive of 19 June 1991 amending for the tenth time Directive 76/769/CEE TheApproximation of the laws, regulations and administrative provisions of the member states relating to restriction of the marketingand use of certain dangerous substances and preparations.4.4 ColourThe impact modified extruded sheets shall be transparent or coloured. In the case of coloured sheet, the colourantshall be incorporated during the manufacture of the sheet and the colour shall be throughout the thickness of thematerial. Colour standards shall be agreed between sheet manufacturer and fabricator.4.5 Thermal stabilityWhen tested according to the method given in 5.2 the impact modified extruded sheet shall show no evidence ofblistering.4.6 Colour fastness4.6.1 Resistance to UV lightWhen tested in apparatus complying with the requirements of the xenon arc lamp method of ISO 4892 for 250 hthe colour change noted in the impact modified extruded sheet shall be recorded in terms of the grey scale forassessing colour change specified in ISO 105-A02. The fastness rating shall be not less than grade 3.The xenon lamp shall only be used when its age is between the limits stated by the manufacturer of the lamp to bethe useful life of the lamp or, where the useful life is not state
...