Guidance on the application of CE marking and preparation of Declaration of Performance for sanitary appliances

This document is primary a guidance and shows instructions, explanations and examples for preparation of Declarations of Performance as well as for CE marking in accordance with 305/2011 EC. The guidance is expecially intended for harmonized standards of CEN/TC 163 e.g. EN 997, EN 12764, EN 13310, EN 13407, EN 14055, EN 14296, EN 14428, EN 14516, EN 14527, EN 14528 and EN 14688.
Products covered by these harmonized standards and therefore the CPR are WCs and WC suites, wirlpool baths, kitchen sinks, wall-hung urinals, WC and urinals flushing cisterns, communal washing troughs, shower enclosures, baths for domestic purposes, shower trays for domestic purposes, bidets and wash basins.
The relationship of the above mentioned standards with EU Construction Products Regulation can be found in the informative Annex ZA of the respective standard.
This document is guidance only and has no mandatory function. Legal requirements are stated in 305/2011 EC and complementary delegated acts of EC e.g. 148/2014 EC and 574/2014 EC.
European legislation e.g. 305/2011 EC and delegated acts could be found at http://eur-lex.europa.eu/legal-content/EN/TXT/?qid=1492068177606&uri=CELEX:32011R0305 .
At the webpages of the European Commission DG GROWTH an overview of existing legislation for 305/2011 EC, the so called construction product Regulation (CPR), can be found. The webpage can be found at https://ec.europa.eu/growth/sectors/construction/product-regulation_en .

Leitfaden zur Anwendung der CE-Kennzeichnung und Vorbereitung der Leistungserklärung für Sanitärausstattungsgegenstände

Dieses Dokument dient in erster Linie als Leitfaden und enthält Anweisungen, Erklärungen und Beispiele für die Vorbereitung von Leistungserklärungen sowie für die CE-Kennzeichnung in Übereinstimmung mit der Verordnung (EU) Nr. 305/2011. Die Leitlinien sind insbesondere für die Verwendung mit den harmonisierten Normen des CEN/TC 163 bestimmt, wie z. B. EN 997, EN 12764, EN 13310, EN 13407, EN 14055, EN 14296, EN 14428, EN 14516, EN 14527, EN 14528 und EN 14688.
Produkte, die der Anwendung dieser Normen, und somit der Bauproduktenverordnung unterliegen, sind WC-Becken und WC-Anlagen, Whirlwannen, Küchenspülen, wandhängende Urinale, Spülkästen für WC-Becken und Urinale, Reihenwaschanlagen, Duschabtrennungen, Badewannen für den Hausgebrauch, Duschwannen für den Hausgebrauch, Sitzwaschbecken und Waschbecken.
Der Zusammenhang der oben genannten Normen mit der EU-Bauproduktenverordnung kann dem informativen Anhang ZA der jeweiligen Norm entnommen werden.
Dieses Dokument dient ausschließlich als Leitfaden; seine Verwendung ist nicht obligatorisch. Rechtsvorschriften sind in der Verordnung (EU) Nr. 305/2011 und in den ergänzenden delegierten Rechtsakten der Europäischen Kommission, z. B. der Durchführungsverordnung (EU) Nr. 148/2014 und der delegierten Verordnung (EU) Nr. 574/2014, formuliert.
Dokumente der EU-Gesetzgebung, z. B. die Verordnung (EU) Nr. 305/2011 und delegierte Rechtsakte sind unter folgender URL verfügbar:
http://eur-lex.europa.eu/legal-content/EN/TXT/?qid=1492068177606&uri=CELEX:32011R0305
Auf den Internetseiten der Generaldirektion WACHSTUM der Europäischen Kommission ist ein Überblick über die bestehende Gesetzgebung zur Verordnung (EU) Nr. 305/2011, der sogenannten Bauproduktenverordnung (BauPVO), zu finden. Diese Internetseiten sind unter folgender URL verfügbar: https://ec.europa.eu/growth/sectors/construction/product-regulation_en

Recommandations relatives à l’application du marquage CE et à la préparation de la déclaration des performances pour les appareils sanitaires

Le présent document fournit principalement des recommandations, des instructions, des explications et
des exemples pour l’élaboration des déclarations des performances ainsi que pour le marquage CE
conformément au Règlement (UE) N° 305/2011. Les recommandations contenues dans le présent
document sont en particulier destinées aux normes harmonisées du CEN/TC 163, telles que les EN 997,
EN 12764, EN 13310, EN 13407, EN 14055, EN 14296, EN 14428, EN 14516, EN 14527, EN 14528 et
EN 14688.
Les produits couverts par ces normes harmonisées et, par voie de conséquence, par le RPC sont les
cuvettes de WC et les cuvettes à réservoir attenant, les baignoires avec système de brassage d’eau, les
éviers de cuisine, les urinoirs muraux, les réservoirs de chasse d’eau pour WC et urinoirs, les lavabos
collectifs, les parois de douche, les baignoires à usage domestique, les receveurs de douche à usage
domestique, les bidets et les lavabos.
Les relations entre les normes mentionnées ci-dessus et le Règlement UE sur les produits de
construction sont indiquées dans l’Annexe ZA, informative, de la norme respective.
Le présent document est uniquement fourni à titre d’indication et ne revêt aucun caractère obligatoire.
Les prescriptions légales stipulées dans le Règlement (UE) N° 305/2011 et les actes délégués
complémentaires de l’UE (par exemple les Règlements (UE) N° 148/2014 et N° 574/2014) s’appliquent.
La législation européenne (par exemple le Règlement UE N° 305/2011) et les actes délégués sont
disponibles à l’adresse : http://eur-lex.europa.eu/legal-content/EN/TXT/?qid=1492068177606&uri=
CELEX:32011R0305.
Les pages Internet de la DG Croissance de la Commission européenne donnent une vue d’ensemble de la
législation existante pour le Règlement UE N° 305/2011, baptisé « Règlement sur les Produits de
Construction (RPC) ». Ces pages sont disponibles à l’adresse : https://ec.europa.eu/growth/sectors/
construction/product-regulation_de.

Navodilo za uporabo CE-označevanja in priprava izjave o lastnostih za sanitarne naprave

Pri tem dokumentu gre primarno za smernice; v dokumentu so prikazana navodila, razlage in primeri za pripravo izjave o zmogljivosti ter oznake CE skladno z uredbo 305/2011 ES. Smernice veljajo zlasti za usklajene standarde CEN/TC 163, npr. EN 997, EN 12764, EN 13310, EN 13407, EN 14055, EN 14296, EN 14428, EN 14516, EN 14527, EN 14528 in EN 14688.
Proizvodi, ki jih zajemajo ti usklajeni standardi in posledično CPR, so straniščne školjke in z njimi povezane naprave, masažne kadi, kuhinjska korita, stenski pisoarji, cisterne za izpiranje straniščnih školjk in pisoarjev, komunalna korita, tuš kabine, kadi za domačo uporabo, kadi za prhanje za domačo uporabo, bideji in umivalniki.
Razmerje med zgoraj navedenimi standardi in Uredbo EU o gradbenih proizvodih lahko najdete v informativnem dodatku ZA posameznega standarda.
Ta dokument predstavlja le smernice in ne vključuje obveznosti. Pravne zahteve, navedene v uredbi 305/2011 ES ter dopolnilni delegirani akti ES, npr. 148/2014 ES in 574/2014 ES.

General Information

Status
Published
Publication Date
03-Apr-2018
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
04-Apr-2018
Due Date
09-Nov-2018
Completion Date
04-Apr-2018

Buy Standard

Technical report
TP CEN/TR 17221:2018
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2018
1DYRGLOR]DXSRUDER&(R]QDþHYDQMDLQSULSUDYDL]MDYHRODVWQRVWLK]DVDQLWDUQH
QDSUDYH
Guidance on the application of CE marking and preparation of Declaration of
Performance for sanitary appliances
Leitfaden zur Anwendung der CE-Kennzeichnung und Vorbereitung der
Leistungserklärung für Sanitärausstattungsgegenstände
Recommandations relatives à l’application du marquage CE et à la préparation de la
déclaration des performances pour les appareils sanitaires
Ta slovenski standard je istoveten z: CEN/TR 17221:2018
ICS:
91.140.70 Sanitarne naprave Sanitary installations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN/TR 17221
TECHNICAL REPORT
RAPPORT TECHNIQUE
April 2018
TECHNISCHER BERICHT
ICS 91.140.70
English Version
Guidance on the application of CE marking and
preparation of Declaration of Performance for sanitary
appliances
Recommandations relatives à l'application du Leitfaden zur Anwendung der CE-Kennzeichnung und
marquage CE et à la préparation de la déclaration des Vorbereitung der Leistungserklärung für
performances pour les appareils sanitaires Sanitärausstattungsgegenstände

This Technical Report was approved by CEN on 9 March 2018. It has been drawn up by the Technical Committee CEN/TC 163.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 17221:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 General . 7
4 Declaration of Performance . 8
5 Guide for CE marking of sanitary appliances . 14
6 Guide to designations for sanitaryware . 16
6.1 General . 16
6.2 WC pans and WC suites according EN 997 . 17
6.3 Whirlpool baths according EN 12764 . 19
6.4 Kitchen sinks according EN 13310 . 20
6.5 Wall hung urinals according EN 13407 . 21
6.6 WC and urinal flushing cisterns according EN 14055 . 22
6.7 Communal washing troughs according EN 14296 . 24
6.8 Shower enclosure according EN 14428 . 25
6.9 Baths for domestic purposes according EN 14516 . 26
6.10 Shower trays for domestic purposes according EN 14527 . 27
6.11 Bidets according EN 14528 . 28
6.12 Wash basins according EN 14688 . 29
7 Typical CE - label examples for sanitaryware . 30
7.1 General . 30
7.2 WC pans and WC suites according EN 997 . 30
7.3 Whirlpool Baths according EN 12764 . 31
7.4 Kitchen sinks according EN 13310 . 32
7.5 Wall hung urinals according EN 13407 . 32
7.6 WC and urinal flushing cisterns according EN 14055 . 33
7.7 Communal washing troughs according EN 14296 . 34
7.8 Shower enclosure according EN 14428 . 35
7.9 Baths for domestic purposes according EN 14516 . 35
7.10 Shower trays for domestic purposes according EN 14527 . 36
7.11 Bidets according EN 14528 . 36
7.12 Wash basins according EN 14688 . 37
8 REACH information. 38
9 Information on dangerous substances . 39
10 Frequently Asked Questions (FAQ) . 39
10.1 Use of a post box address . 39
10.2 Does the CE label need to include the year of publication of the standard on the
label? . 39
10.3 How should packs that contain multiple CE compliant products be labelled? . 39
10.4 Marking of glass and curved glass in shower enclosure / bath screens . 40
10.5 Does the CE label need a ‘Made in XXX’ country of origin mark? . 40
10.6 Are all versions of published standards suitable for use for CE marking? . 40
10.7 When a new product standard is cited in the OJEU, does the CE label and DoP
document need to be updated? . 40
Bibliography . 41

European foreword
This document (CEN/TR 17221:2018) has been prepared by Technical Committee CEN/TC 163
“Sanitary appliances”, the secretariat of which is held by UNI.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document is guidance only and has no mandatory function. Legal requirements are stated in
305/2011 EC and complementary delegated acts of EC e.g. 148/2014 EC and 574/2014 EC.

Introduction
Harmonized standards for Sanitary Appliances have been available for some time. CE marking of
construction products started with the Construction Products Directive (CPD) 89/106 EC. This directive
was replaced by 305/2011 EC “Construction Products Regulation” (CPR) in July 2013. The introduction
of the CPR legislation implied a new legal framework mandating CE marking for compliant products and
the supply of Declaration of Performance (DoP) documents when placing compliant products on the
market.
Currently available harmonized standards may not show the actual legal situation according to the
Construction Products Regulation (CPR). Nevertheless, it is essential that the products when placed on
the market follow the latest legal requirements detailed from the European Commission (EC).
It is allowed to use harmonized standards only after the citation of the standards in the European
Official Journal [OJEU] (followed by the citation in national official Journals).
At present the harmonized standards cited in the OJEU are reporting older product CE marking details,
requesting a Declaration of Conformity (DoC), while e.g. the revised standards, which include the
reference to the Declaration of Performance (DoP) in accordance with the CPR, are still waiting for
citation in the OJEU. This situation can easily occur due to time delays between the publication of a
regulation and the necessary revision of the underlying standards.
This document has the aim to show the current CPR requirements and examples for DoP and CE
marking procedure of sanitary appliances. This guide aims to help understanding the actual legal
requirements in terms of Declaration of Performance and CE marking that need to be used for sanitary
appliances.
1 Scope
This document is primary a guidance and shows instructions, explanations and examples for
preparation of Declarations of Performance as well as for CE marking in accordance with 305/2011 EC.
The guidance is expecially intended for harmonized standards of CEN/TC 163 e.g. EN 997, EN 12764,
EN 13310, EN 13407, EN 14055, EN 14296, EN 14428, EN 14516, EN 14527, EN 14528 and EN 14688.
Products covered by these harmonized standards and therefore the CPR are WCs and WC suites,
wirlpool baths, kitchen sinks, wall-hung urinals, WC and urinals flushing cisterns, communal washing
troughs, shower enclosures, baths for domestic purposes, shower trays for domestic purposes, bidets
and wash basins.
The relationship of the above mentioned standards with EU Construction Products Regulation can be
found in the informative Annex ZA of the respective standard.
This document is guidance only and has no mandatory function. Legal requirements are stated in
305/2011 EC and complementary delegated acts of EC e.g. 148/2014 EC and 574/2014 EC.
European legislation e.g. 305/2011 EC and delegated acts could be found at http://eur-
lex.europa.eu/legal-content/EN/TXT/?qid=1492068177606&uri=CELEX:32011R0305 .
At the webpages of the European Commission DG GROWTH an overview of existing legislation for
305/2011 EC, the so called construction product Regulation (CPR), can be found. The webpage can be
found at https://ec.europa.eu/growth/sectors/construction/product-regulation_en .
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 997, WC pans and WC suites with integral trap
EN 12764, Sanitary appliances — Specification for whirlpool baths
EN 13310, Kitchen sinks — Functional requirements and test methods
EN 13407, Wall-hung urinals — Functional requirements and test methods
EN 14055, WC and urinal flushing cisterns
EN 14296, Sanitary appliances — Communal washing troughs
EN 14428, Shower enclosures — Functional requirements and test methods
EN 14516, Baths for domestic purposes
EN 14527, Shower trays for domestic purposes
EN 14528, Bidets — Functional requirements and test methods
EN 14688, Sanitary appliances — Wash basins — Functional requirements and test methods
3 General
This document is a guidance paper for products complying with harmonized standards of CEN/TC 163.
The bases for this guidance are the requirements laid out including specific delegated acts of the CPR.
The EC 305/2011 “Construction Products Regulation” (CPR) lays down harmonized rules for marking
construction products in the EU. The Regulation provides a common technical language to assess the
performance of construction products. It ensures that reliable information is available to
manufacturers, public authorities, market surveillance and consumers, etc. In this manner the
performance of products f
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.