EN ISO 5173:2010/A1:2011
(Amendment)Destructive tests on welds in metallic materials - Bend tests - Amendment 1 (ISO 5173:2009/Amd 1:2011)
Destructive tests on welds in metallic materials - Bend tests - Amendment 1 (ISO 5173:2009/Amd 1:2011)
2011-03-02 EMA: // final draft received in ISO/CS (see notification of 2011-03-01 in dataservice).
MINOR AMENDMENT!!! MINOR AMENDMENT!!! MINOR AMENDMENT!!! MINOR AMENDMENT!!!
Zerstörende Prüfungen von Schweißnähten an metallischen Werkstoffen - Biegeprüfungen - Änderung 1 (ISO 5173:2009/Amd 1:2011)
Essais destructifs des soudures sur matériaux métalliques - Essais de pliage - Amendement 1 (ISO 5173:2009/Amd 1:2011)
Porušitveno preskušanje zvarnih spojev na kovinskih materialih - Upogibni preskusi - Dopolnilo 1 (ISO 5173:2009/Amd 1:2011)
Ta mednarodni standard določa metodo za opravljanje prečnih, sprednjih in stranskih upogibnih preskusov na preskusnih vzorcih, vzetih iz soležnih zvarov, soležnih zvarov z oblogo (razdeljenih v zvare v ploščah za oblogo in navare) in oblog brez soležnih zvarov, z namenom oceniti preoblikovalnost in/ali odsotnost pomanjkljivosti na ali v bližini površine preskusnega vzorca. Prav tako podaja mere preskusnega vzorca. Poleg tega ta mednarodni standard določa metodo za opravljanje vzdolžnih upogibnih preskusov na korenu in sprednji strani, ki se uporabljajo namesto prečnih upogibnih preskusov za heterogene sklope, kadar imajo osnovni materiali in/ali kovina za polnjenje znatno razliko v fizikalnih in mehanskih lastnostih glede upogibanja. Ta mednarodni standard se uporablja za kovinske materiale v vseh oblikah izdelkov z zvarnimi spoji, ki so spojeni s kakršnimkoli postopkom obločnega varjenja.
General Information
- Status
- Withdrawn
- Publication Date
- 31-Oct-2011
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121 - Welding
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 25-Jan-2023
- Completion Date
- 28-Jan-2026
Relations
- Replaced By
EN ISO 5173:2023 - Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2023) - Effective Date
- 18-Jan-2023
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Amends
EN ISO 5173:2010 - Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009) - Effective Date
- 26-Feb-2011
- Revised
prEN ISO 5173 - Destructive tests on welds in metallic materials - Bend tests (ISO/DIS 5173:2017) - Effective Date
- 02-Sep-2015
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN ISO 5173:2010/A1:2011 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Destructive tests on welds in metallic materials - Bend tests - Amendment 1 (ISO 5173:2009/Amd 1:2011)". This standard covers: 2011-03-02 EMA: // final draft received in ISO/CS (see notification of 2011-03-01 in dataservice). MINOR AMENDMENT!!! MINOR AMENDMENT!!! MINOR AMENDMENT!!! MINOR AMENDMENT!!!
2011-03-02 EMA: // final draft received in ISO/CS (see notification of 2011-03-01 in dataservice). MINOR AMENDMENT!!! MINOR AMENDMENT!!! MINOR AMENDMENT!!! MINOR AMENDMENT!!!
EN ISO 5173:2010/A1:2011 is classified under the following ICS (International Classification for Standards) categories: 25.160.40 - Welded joints and welds. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 5173:2010/A1:2011 has the following relationships with other standards: It is inter standard links to EN ISO 5173:2023, EN 13480-8:2024, EN 10253-2:2021, EN 14276-1:2020, EN ISO 5173:2010, prEN ISO 5173. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 5173:2010/A1:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2013
Porušitveno preskušanje zvarnih spojev na kovinskih materialih - Upogibni
preskusi - Dopolnilo 1 (ISO 5173:2009/Amd 1:2011)
Destructive tests on welds in metallic materials - Bend tests - Amendment 1 (ISO
5173:2009/Amd 1:2011)
Zerstörende Prüfungen von Schweißnähten an metallischen Werkstoffen -
Biegeprüfungen - Änderung 1 (ISO 5173:2009/Amd 1:2011)
Essais destructifs des soudures sur matériaux métalliques - Essais de pliage -
Amendement 1 (ISO 5173:2009/Amd 1:2011)
Ta slovenski standard je istoveten z: EN ISO 5173:2010/A1:2011
ICS:
25.160.40 Varjeni spoji in vari Welded joints
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 5173:2010/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2011
ICS 25.160.40
English Version
Destructive tests on welds in metallic materials - Bend tests -
Amendment 1 (ISO 5173:2009/Amd 1:2011)
Essais destructifs des soudures sur matériaux métalliques - Zerstörende Prüfungen von Schweißnähten an
Essais de pliage - Amendement 1 (ISO 5173:2009/Amd metallischen Werkstoffen - Biegeprüfungen - Änderung 1
1:2011) (ISO 5173:2009/Amd 1:2011)
This amendment A1 modifies the European Standard EN ISO 5173:2010; it was approved by CEN on 31 October 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5173:2010/A1:2011: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 5173:2010/A1:2011) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2012, and conflicting national standards shall be withdrawn at the
latest by May 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are boun
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...