iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12101-10:2005

(Main)

Smoke and heat control systems - Part 10: Power supplies

Smoke and heat control systems - Part 10: Power supplies

This European Standard specifies requirements and gives test methods for primary and secondary electrical and pneumatic power supply equipment, designed for use in smoke and heat control systems in buildings. It also provides for the evaluation of conformity of such equipment to the requirements of this European Standard.
NOTE   A summary of functions is given in Annex A.

Rauch- und Wärmefreihaltung - Teil 10: Energieversorgung

Diese Europäische Norm spezifiziert die Anforderungen und gibt Prüfverfahren, für primäre und sekundäre elektrische und pneumatische Energieversorgungseinrichtungen, die für den Einsatz in Anlagen zur Rauch- und Wärmefreihaltung in Gebäuden konzipiert sind. Sie dient auch zur Konformitätsbewertung von solchen Einrichtungen in Bezug auf die Anforderungen dieser Europäische Norm.
ANMERKUNG   Eine Zusammenfassung der Funktionen ist im Anhang A aufgeführt.

Systèmes pour le contrôle des fumées et de la chaleur - Partie 10 : Equipement d'alimentation en énergie

Cette Norme européenne spécifie les exigences et indique les méthodes d�essai applicables à un équipement
d'alimentation en énergie électrique et pneumatique, principale et secondaire, conçu pour être installé dans des
systèmes de contrôle des fumées et de la chaleur dans les bâtiments. Il permet également d�évaluer la conformité
dudit équipement aux exigences de la présente Norme européenne.
NOTE Un résumé des fonctions est donné dans l�Annexe A.

Sistemi za nadzor dima in toplote – 10. del: Oskrba z energijo

General Information

Status
Published
Publication Date
11-Oct-2005
Withdrawal Date
29-Apr-2006
ICS
13.220.99 - Other standards related to protection against fire
Technical Committee
CEN/TC 191 - Fixed firefighting systems
Drafting Committee
CEN/TC 191/SC 1/WG 7 - Power supplies
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
05-Jun-2023
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/109 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on fire alarm/detection, fixed firefighting, fire and smoke control and explosion suppression products
Ref Project
SIST EN 12101-10:2005 - Smoke and heat control systems - Part 10: Power supplies

Relations

Corrected By
EN 12101-10:2005/AC:2007 - Smoke and heat control systems - Part 10: Power supplies
Effective Date
22-Dec-2008

Buy Standard

EN 12101-10:2005EN 12101-10:2005
PreviousNext
Standard
EN 12101-10:2005
English language
51 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Smoke and heat control systems - Part 10: Power suppliesSistemi za nadzor dima in toplote – 10. del: Oskrba z energijoSystemes pour le contrôle des fumées et de la chaleur - Partie 10 : Equipement d'alimentation en énergieRauch- und Wärmefreihaltung - Teil 10: EnergieversorgungTa slovenski standard je istoveten z:EN 12101-10:2005SIST EN 12101-10:2005en13.220.20ICS:SLOVENSKI
STANDARDSIST EN 12101-10:200501-december-2005

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12101-10October 2005ICS 13.220.99 English VersionSmoke and heat control systems - Part 10: Power suppliesSystèmes pour le contrôle des fumées et de la chaleur -Partie 10 : Equipement d'alimentation en énergieRauch- und Wärmefreihaltung - Teil 10: EnergieversorgungThis European Standard was approved by CEN on 26 August 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12101-10:2005: E

Summary of functions.45 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive.46 ZA.1 Scope and relevant characteristics.46 ZA.2 Procedure for attestation of conformity of power supply equipment.47 ZA.2.1 System of attestation of conformity.47 ZA.2.2 EC Certificate and Declaration of conformity.48 ZA.3 CE marking and labelling.49

Part 1: Specification for smoke barriers,
Part 2: Specification for natural smoke and heat exhaust ventilators,
Part 3: Specification for powered smoke and heat exhaust ventilators,
Part 4: Fire and smoke control installations – Kits,
Part 6: Pressure differential systems – Kits,
Part 7: Smoke control ducts,
Part 8: Specifications for smoke control dampers,
Part 9: Control panels,
Part 10: Power supplies. EN 12101 is included in a series of European Standards planned to cover also:  Gas extinguishing systems (EN 12094 and EN ISO 14520),  Sprinkler systems (EN 12259),  Powder systems (EN 12416),  Explosion protection systems (EN 26184),  Foam systems (EN 13565),  Hose systems (EN 671),  Water spray systems. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TS 12101-11:2022(Main)
Smoke and heat control systems - Part 11: Horizontal flow powered ventilation systems for enclosed car parks
SIST-TS CEN/TS 12101-11:2022

This document gives minimum design, installation and commissioning requirements for powered smoke and heat control systems for enclosed car parks using horizontal flow powered ventilation, with or without sprinkler protection, on one or more levels, for cars and light commercial vehicles (max 3,5 t), to reach the design objectives outlined in this document .
This document is applicable for car parks with vehicles powered by petrol, diesel, electricity, CNG or LPG.
NOTE 1   For the purpose of this document for smoke ventilation systems, it is assumed that cars powered by electricity, CNG (compressed natural gas) or LPG (liquefied petroleum gas) will have similar HRR to vehicles powered by petrol or diesel.
NOTE 2   Cars powered by hydrogen are not covered by this document.
This document only covers traditional car parks that are with cars parked alongside each other, with common car access lanes. It does not cover other forms of car parking systems, such as stacking systems.
This document does not cover requirements for day‐to‐day ventilation.
Any other risks than fire from cars are not covered by this document.

  • Technical specification
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12101-6:2022(Main)
Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits
SIST EN 12101-6:2022

This document applies to pressure differential system kits and components, positioned on the market and intended to operate as part of a pressure differential system. The purpose of a pressure differential system is to prevent protected spaces from smoke spread by using pressure difference and airflow. This document specifies characteristics and test methods for components and kits for pressure differential systems to produce and control the required pressure differential and airflow between protected and unprotected space.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12101-13:2022(Main)
Smoke and heat control systems - Part 13: Pressure differential systems (PDS) - Design and calculation methods, installation, acceptance testing, routine testing and maintenance
SIST EN 12101-13:2022

This document gives calculation methods, guidance and requirements for the design, installation, acceptance testing, routine testing and maintenance for pressure differential systems (PDS).
PDSs are designed to hold back smoke at a leaky physical barrier in a building, such as a door (either open or closed) or other similarly restricted openings and to keep tenable conditions in escape and access routes depending on the application.
It covers systems intended to protect means of escape e.g. staircases, corridors, lobbies, as well as systems intended to provide a protected firefighting space (bridgehead) for the fire services.
It provides details on the critical features and relevant procedures for the installation.
It describes the commissioning procedures and acceptance testing criteria required to confirm that the calculated design is achieved in the building.
This document gives rules, requirements and procedures to design PDS for buildings up to 60 m.
For buildings taller than 60 m the same requirements are given (e.g. Table 1), but additional methods of calculation and verification are necessary. Requirements for such methods and verification are given in Annex D, but the methods fall outside the scope of this document [e.g. Additional mathematical analysis and/or Computational Fluid Dynamics (CFD)].
Routine testing and maintenance requirements are also defined in this document.
In the absence of national requirements and under expected ambient and outside conditions, the requirements in Table 1 are fulfilled by the PDS.

  • Standard
    118 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12101-2:2017(Main)
Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators
SIST EN 12101-2:2017

This European Standard applies to natural smoke and heat exhaust ventilators (NSHEV) operating as part of smoke and heat exhaust systems (NSHEVS), placed on the market. This standard specifies requirements and gives test methods for natural smoke and heat exhaust ventilators which are intended to be installed in smoke and heat control systems in buildings.

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12101-3:2015(Main)
Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
SIST EN 12101-3:2015

This European Standard specifies the products characteristics of powered smoke and heat control ventilators (fans) intended to be used as part of a powered smoke and heat control ventilation system in construction works.
It provides test and assessment methods of the characteristics and the compliance criteria of the test assessment results.
This European Standard applies to the following:
a)   fans for smoke and heat control ventilation;
b)   impulse/jet fans for smoke and heat control ventilation;

  • Standard
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12101-7:2011(Main)
Smoke and heat control systems - Part 7: Smoke duct sections
SIST EN 12101-7:2011

This European Standard applies to smoke control duct sections, placed on the market and intended to operate as part of a pressure differential system or smoke and heat exhaust system. This standard specifies requirements and gives reference to the test methods defined for smoke control duct sections and their associated components (for example, hangers and other items proven at the time of testing), which are intended to be installed in such systems in buildings. It also provides for the evaluation of conformity of the products to the requirements of this standard. Furthermore, marking and information on installation and maintenance of these products are also given in this European Standard.
To avoid duplication, reference is made to a variety of other standards. To this end, this standard is to be read in conjunction with EN 1366-8, EN 1366-9 and EN 1366-1, for details of the fire resistance testing and EN 13501-4 for corresponding classification.
This standard has not considered in detail the detrimental and/or corrosive effects that may be caused by process chemicals present in the atmosphere, which are drawn through the system intentionally or inadvertently.
This European Standard also governs associated components used together with smoke control duct sections such as turning vanes and silencers, with the exception of natural and powered smoke ventilators and smoke control dampers, which are covered by separate standards.
Ducts for use other than in smoke and heat exhaust/control systems are not covered by this standard.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12101-8:2011(Main)
Smoke and heat control systems - Part 8: Smoke control dampers
SIST EN 12101-8:2011

This European Standard applies to smoke control dampers, placed on the market and intended to operate as part of a pressure differential system or smoke and heat control system. This standard specifies requirements and gives reference to the test methods defined for smoke control dampers and their associated components, such as actuators which are intended to be installed in such systems in buildings. It also provides for the evaluation of conformity of these products to the requirements of this standard. Furthermore, provision on marking and information on installation and maintenance of these products are also given.
This European Standard distinguish between two categories of smoke control dampers, i.e. single compartment smoke control dampers and multi-compartment fire resisting smoke control dampers.
Smoke control dampers covered by this European Standard can be installed into smoke control system ducts or onto the ducts´ surface. They can be installed also into a wall, floor or ceiling/roof elements or onto the surface of these elements.
To avoid duplication, reference is made to a variety of other standards. To this end, this standard is to be read in conjunction with EN 13501-4, prEN 1366-10 and EN 1366-2, for details of the furnace testing.
This standard does not consider in detail the detrimental and/or corrosive effects that may be caused by process chemicals present in the atmosphere, which are drawn through the system intentionally or inadvertently.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 12101-4:2009(Main)
Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heat ventilation
SIST-TP CEN/TR 12101-4:2009

This Technical Report applies to SHEVS when installed in a building. This Technical Report specifies the ability of the system to meet the required performances of the SHEVS as specified by the design of the system. This Technical Report is to help to translate the detailed engineering plan into an installed system, but it does not state how the design is made. This Technical Report also covers requirements for components and compatibility between components to ensure that the requirements on the installed system will be met. This Technical report includes requirements for the assembly, installation, commissioning, function testing, maintenance, periodic servicing and routine testing of SHEVS.

  • Technical report
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12101-10:2005/AC:2007(Corrigendum)
Smoke and heat control systems - Part 10: Power supplies
SIST EN 12101-10:2005/AC:2007

TC - Modification to 5.2.5.2 and 5.2.5.3

  • Corrigendum
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 12101-5:2005(Main)
Smoke and heat control systems - Part 5: Guidelines on functional recommendations and calculation methods for smoke and heat exhaust ventilation systems
SIST-TP CEN/TR 12101-5:2005

This Technical Report gives recommendations and guidance on functional and calculation methods for smoke and heat exhaust ventilation systems for steady-state design fires. It is intended for a variety of building types and applications, including single-storey buildings, mezzanine floors, warehouses with palletized or racked storage, shopping malls, atria and complex buildings, car parks, places of entertainment and public assembly and un-compartmented space within multi-storey buildings.
This Technical Report does not include any functional recommendations for design parameters where the primary purpose of the SHEVS is to assist fire-fighting.
NOTE   Such functional recommendations need to be agreed with the fire service responsible for the building in question. The calculation procedures set out in the annexes of this Technical Report can be used to design the SHEVS to meet whatever recommendations have been agreed.
This Technical Report does not cover the following:
-   smoke clearance, where smoke is exhausted from a building after the fire has been suppressed;
-   cross-ventilation, where wind-induced or fan-induced air currents sweep smoke through and out of the building, usually as part of fire-fighting operational procedures;
-   ventilation of stairwells, which usually represents a special application of smoke clearance and which does not necessarily protect the continued use of the stairwell;
-   fully-involved fires.

  • Technical report
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day