Infusion equipment for medical use - Part 5: Burette infusion sets for single use, gravity feed (ISO 8536-5:2004)

ISO 8536-5:2004 specifies requirements for types of single-use, gravity feed burette infusion sets of 50 ml, 100 ml and 150 ml nominal capacity for medical use in order to ensure compatibility of use with containers for infusion solutions and intravenous equipment.
ISO 8536-5:2004 also provides guidance on specifications relating to the quality and performance of materials.
In some countries, national pharmacopoeia or other national regulations are legally binding and take precedence over ISO 8536-5:2004.

Infusionsgeräte zur medizinischen Verwendung - Teil 5: Infusionsgeräte mit Dosierbehälter für Schwerkraftinfusionen zur einmaligen Verwendung (ISO 8536-5:2004)

Dieser Teil von ISO 8536 legt Anforderungen für Typen von Infusionsgeräten der Nennvolumen 50 ml, 100 ml und 150 ml mit Dosierbehälter für Schwer¬kraftinfusionen zur einmaligen Verwendung zur medizinischen Verwendung fest, um die Kompatibilität mit Behältern für Infusionslösungen und intravenösen Zugangsmitteln sicherzustellen.
Dieser Teil von ISO 8536 liefert auch eine Anleitung zu Festlegungen hinsichtlich der Qualität und Leistungs-fähigkeit der in Infusionsgeräten verwendeten Werkstoffe.
ANMERKUNG   In einigen Ländern sind das nationale Arzneibuch oder sonstige nationale Bestimmungen gesetzlich bindend und haben Vorrang vor diesem Teil von ISO 8536.

Matériel de perfusion à usage médical - Partie 5: Appareils non réutilisables de perfusion à burette, à alimentation par gravité (ISO 8536-5:2004)

L'ISO 8536-5:2004 spécifie les exigences applicables aux appareils non réutilisables de perfusion à burette, à alimentation par gravité, d'une capacité nominale de 50 ml, 100 ml et 150 ml, à usage médical, afin d'assurer la compatibilité d'emploi entre les récipients pour les solutions de perfusion et les appareils intraveineux.
L'ISO 8536-5:2004 donne également des lignes directrices sur les spécifications relatives à la qualité et aux performances des matériaux utilisés dans les appareils de perfusion.

Infuzijska oprema za uporabo v medicini - 5. del: Infuzijski seti z dozirnikom za primere težje infuzije za enkratno uporabo, delujoči na osnovi gravitacije (ISO 8536-5:2004)

Ta del standarda ISO 8536 določa zahteve za infuzijske sete z dozirnikom za primere težje infuzije za enkratno uporabo, delujoče na osnovi gravitacije, z nominalno kapaciteto 50 ml, 100 ml in 150 ml za uporabo v medicini za zagotavljanje združljivosti z vsebniki za infuzijske raztopine in intravenozno opremo. Ta del standarda ISO 8536 prav tako ponuja napotke glede specifikacij v zvezi s kakovostjo in lastnostmi materialov za infuzijske sete.

General Information

Status
Withdrawn
Publication Date
08-Nov-2011
Withdrawal Date
05-Feb-2013
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
06-Feb-2013
Completion Date
06-Feb-2013

Relations

Effective Date
13-Feb-2013
Effective Date
09-Feb-2026

Get Certified

Connect with accredited certification bodies for this standard

BSI Group

BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.

UKAS United Kingdom Verified

TÜV Rheinland

TÜV Rheinland is a leading international provider of technical services.

DAKKS Germany Verified

TÜV SÜD

TÜV SÜD is a trusted partner of choice for safety, security and sustainability solutions.

DAKKS Germany Verified

Sponsored listings

Frequently Asked Questions

EN ISO 8536-5:2011 is a standard published by the European Committee for Standardization (CEN). Its full title is "Infusion equipment for medical use - Part 5: Burette infusion sets for single use, gravity feed (ISO 8536-5:2004)". This standard covers: ISO 8536-5:2004 specifies requirements for types of single-use, gravity feed burette infusion sets of 50 ml, 100 ml and 150 ml nominal capacity for medical use in order to ensure compatibility of use with containers for infusion solutions and intravenous equipment. ISO 8536-5:2004 also provides guidance on specifications relating to the quality and performance of materials. In some countries, national pharmacopoeia or other national regulations are legally binding and take precedence over ISO 8536-5:2004.

ISO 8536-5:2004 specifies requirements for types of single-use, gravity feed burette infusion sets of 50 ml, 100 ml and 150 ml nominal capacity for medical use in order to ensure compatibility of use with containers for infusion solutions and intravenous equipment. ISO 8536-5:2004 also provides guidance on specifications relating to the quality and performance of materials. In some countries, national pharmacopoeia or other national regulations are legally binding and take precedence over ISO 8536-5:2004.

EN ISO 8536-5:2011 is classified under the following ICS (International Classification for Standards) categories: 11.040.20 - Transfusion, infusion and injection equipment. The ICS classification helps identify the subject area and facilitates finding related standards.

EN ISO 8536-5:2011 has the following relationships with other standards: It is inter standard links to EN ISO 8536-5:2013, ISO 8536-4:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN ISO 8536-5:2011 is associated with the following European legislation: EU Directives/Regulations: 93/42/EEC; Standardization Mandates: M/023. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN ISO 8536-5:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2012
,QIX]LMVNDRSUHPD]DXSRUDERYPHGLFLQLGHO,QIX]LMVNLVHWL]GR]LUQLNRP]D
SULPHUHWHåMHLQIX]LMH]DHQNUDWQRXSRUDERGHOXMRþLQDRVQRYLJUDYLWDFLMH ,62

Infusion equipment for medical use - Part 5: Burette infusion sets for single use, gravity
feed (ISO 8536-5:2004)
Infusionsgeräte zur medizinischen Verwendung - Teil 5: Infusionsgeräte mit
Dosierbehälter für Schwerkraftinfusionen zur einmaligen Verwendung (ISO 8536-5:2004)
Matériel de perfusion à usage médical - Partie 5: Appareils non réutilisables de perfusion
à burette, à alimentation par gravité (ISO 8536-5:2004)
Ta slovenski standard je istoveten z: EN ISO 8536-5:2011
ICS:
11.040.20 Transfuzijska, infuzijska in Transfusion, infusion and
injekcijska oprema injection equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 8536-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2011
ICS 11.040.20
English Version
Infusion equipment for medical use - Part 5: Burette infusion
sets for single use, gravity feed (ISO 8536-5:2004)
Matériel de perfusion à usage médical - Partie 5: Appareils Infusionsgeräte zur medizinischen Verwendung - Teil 5:
non réutilisables de perfusion à burette, à alimentation par Infusionsgeräte mit Dosierbehälter für
gravité (ISO 8536-5:2004) Schwerkraftinfusionen zur einmaligen Verwendung (ISO
8536-5:2004)
This European Standard was approved by CEN on 15 October 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8536-5:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EC Directive 93/42/EEC on medical devices .4

Foreword
The text of ISO 8536-5:2004 has been prepared by Technical Committee ISO/TC 76 “Transfusion, infusion
and injection, and blood processing equipment for medical and pharmaceutical use” of the International
Organization for Standardization (ISO) and has been taken over as EN ISO 8536-5:2011 by Technical
Committee CEN/TC 205 “Non-active medical devices” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2012, and conflicting national standards shall be withdrawn at the
latest by May 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 8536-5:2004 has been approved by CEN as a EN ISO 8536-5:2011 without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EC Directive 93/42/EEC on medical devices
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 93/42/EEC on medical devices.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the clauses of this
standard given in table ZA.1 confers, within the limits of the scope of this standard, a presumption of
conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard
and Directive 93/42/EEC on medical devices
Clause(s)/sub-clause(s) of this Essential Requirements (ERs) Qualifying remarks/Notes
EN of Directive 93/42/EEC
3.2 7.2, 8.1
3.3 7.6
4 13.3
5 1, 2, 3
6.1 9.1, 12.7.1
6.2.1 12.8
6.2.2 7.6
6.2.3 7.6
6.3 10
6.4 10
7 7
8 7.1, 7.2, 7.5, 8.4 Presumption of conformity with
the Essential Requirements
relating to the biological
evaluation can only be provided
if the manufacturer chooses to
apply the ISO 10993 series of
standards. However, the part of
ER 7.5 relating to phthalates is
not specifically addressed in the
EN ISO 10993 series.
continued
Table ZA.1 (continued)
Clause(s)/sub-clause(s) of this Essential Requirements (ERs) Qualifying remarks/Notes
EN of Directive 93/42/EEC
9 13 The part of ER 13.3 a) relating to
the authorized representative is
not addressed.
ERs 13.3 f) and 13.6 h) relating
to single-use are not fully
addressed.
ER 13.6 q) is not addressed.
10 5, 8.3
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
INTERNATIONAL ISO
STANDARD 8536-5
Second edition
2004-02-01
Infusion equipment for medical use —
Part 5:
Burette infusion sets for single use,
gravity feed
Matériel de perfusion à usage médical —
Partie 5: Appareils non réutilisables de perfusion à burette, à
alimentation par gravité
Reference number
ISO 8536-5:2004(E)
©
ISO 2004
ISO 8536-5:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please i
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...