EN ISO 19956:2004
(Main)Footwear - Test methods for heels - Fatigue resistance (ISO 19956:2004)
Footwear - Test methods for heels - Fatigue resistance (ISO 19956:2004)
ISO 19956:2004 specifies a test method for determining the ability of heels of ladies' shoes to withstand the repeated small impacts imposed by normal walking. Although intended primarily for plastic heels, the procedure is also usable for testing steel heel dowels on their own.
While the test method is applicable to all types of high heels of any construction, it is particularly useful for injection-moulded plastic heels that incorporate a steel dowel reinforcement.
Schuhe - Prüfverfahren für Absätze - Ermüdungswiderstand (ISO 19956:2004)
Chaussures - Méthodes d'essai relatives aux talons - Résistance à la fatigue (ISO 19956:2004)
L'ISO 19956 spécifie une méthode d'essai pour déterminer l'aptitude des talons de chaussures pour femmes à supporter les petits chocs répétés imposés par la marche normale. Bien que destinée en premier lieu aux talons en plastique, le mode opératoire est également utilisable pour l'essai des goupilles de talon en acier.
La méthode d'essai est applicable à tous les types de talons hauts, quelle que soit leur construction, mais elle est particulièrement utile pour les talons en plastique moulés par injection, qui incorporent une goupille de renfort en acier.
Obutev – Preskusne metode za pete – Odpornost proti utrujanju (ISO 19956:2004)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2005
Obutev – Preskusne metode za pete – Odpornost proti utrujanju (ISO 19956:2004)
Footwear - Test methods for heels - Fatigue resistance (ISO 19956:2004)
Schuhe - Prüfverfahren für Absätze - Ermüdungswiderstand (ISO 19956:2004)
Chaussures - Méthodes d'essai relatives aux talons - Résistance a la fatigue (ISO
19956:2004)
Ta slovenski standard je istoveten z: EN ISO 19956:2004
ICS:
61.060 Obuvala Footwear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 19956
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2004
ICS 61.060
English version
Footwear - Test methods for heels - Fatigue resistance (ISO
19956:2004)
Chaussures - Méthodes d'essai relatives aux talons - Schuhe - Prüfverfahren für Absätze -
Résistance à la fatigue (ISO 19956:2004) Ermüdungswiderstand (ISO 19956:2004)
This European Standard was approved by CEN on 2 March 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19956:2004: E
worldwide for CEN national Members.
Contents page
Foreword.3
1 Scope .4
2 Terms and definitions .4
3 Apparatus and material.4
4 Sampling and conditioning.6
5 Test method.6
6 Expression of results .7
7 Test report .7
Foreword
This document (EN ISO 19956:2004) has been prepared by Technical Committee CEN /TC 309 "Footwear", the
secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 216 "Footwear".
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by March 2005, and conflicting national standards shall be withdrawn at the latest by
March 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
1 Scope
This European Standard specifies a test method for determining the ability of heels of ladies’ shoes to withstand the
repeated small impacts imposed by normal walking. Although intended primarily for plastics heels, the procedure is
also usable for testing steel heel dowels on their own.
NOTE While the test method is applicable to all types of high heels of any construction, it is particularly useful for injection-
moulded plastics heels which incorporate a steel dowel reinforcement. The shape of some heels is such that they have a high
fatigue resistance. It is usually considered unnecessary to test such heels for fatigue resistance.
2 Terms and definitions
For the purposes of this European Standard, the following term and definition apply.
fatigue resistance
resistance of a heel, under specified conditions, to repeated loading cycles.
3 Apparatus and material
3.1 The following apparatus and material shall be used:
3.2 Heel fatigue-testing apparatus, incorporating a motor-driven pendulum which can deliver blows to a test
specimen assembly, each blow having an energy of 0,68 J, at th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.