iTeh Standards logo
EURUSD
Your shopping cart is empty.
CEN

EN 725-5:2007/AC:2007

(Corrigendum)

Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution

Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution

TC - Modifications in Table B.1, 1st column of the E + F versions

Hochleistungskeramik - Prüfverfahren für keramische Pulver - Teil 5: Bestimmung der Teilchengrößenverteilung

Céramiques techniques avancées - Méthodes d'essais des poudres céramiques - Partie 5: Détermination de la distribution granulométrique

Sodobna tehnična keramika - Preskusne metode za keramične praške - 5. del: Ugotavljanje zrnavosti

General Information

Status
Published
Publication Date
31-Jul-2007
ICS
81.060.30 - Advanced ceramics
Technical Committee
CEN/TC 184 - Advanced technical ceramics
Drafting Committee
CEN/TC 184 - Advanced technical ceramics
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Aug-2007
Completion Date
01-Aug-2007
Mandate
M/BC/CEN/90/4 - Request concerning the realisation of a standardization programme in the field of advanced technical ceramics
Ref Project
SIST EN 725-5:2007/AC:2007 - Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution

Relations

Corrects
EN 725-5:2007 - Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution
Effective Date
22-Dec-2008
EN 725-5:2007/AC:2007EN 725-5:2007/AC:2007
PreviousNext
Corrigendum
EN 725-5:2007/AC:2007
English and French language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distributionCéramiques techniques avancées - Méthodes d'essais des poudres céramiques - Partie 5: Détermination de la distribution granulométriqueHochleistungskeramik - Prüfverfahren für keramische Pulver - Teil 5: Bestimmung der TeilchengrößenverteilungTa slovenski standard je istoveten z:EN 725-5:2007/AC:2007SIST EN 725-5:2007/AC:2007en,fr81.060.30Sodobna keramikaAdvanced ceramicsICS:SLOVENSKI
STANDARDSIST EN 725-5:2007/AC:200701-oktober-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 725-5:2007/ACAugust 2007Août 2007August 2007ICS 81.060.30English versionVersion FrançaiseDeutsche FassungAdvanced technical ceramics - Methods of test for ceramic powders - Part5: Determination of particle size distributionCéramiques techniques avancées -Méthodes d'essais des poudrescéramiques - Partie 5: Détermination de ladistribution granulométriqueHochleistungskeramik - Prüfverfahren fürkeramische Pulver - Teil 5: Bestimmung derTeilchengrößenverteilungThis corrigendum becomes effective on 1 August 2007 for incor
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

CEN
EN 15365:2025(Main)
Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold grip method
SIST EN 15365:2026

This document specifies the conditions for the determination of the tensile creep deformation and failure behaviour of single filaments of ceramic fibres at high temperature and under test conditions that prevent changes to the material as a result of chemical reaction with the test environment.
This document applies to continuous ceramic filaments taken from tows, yarns, braids and knittings, which have strains to fracture less than or equal to 5 %.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17162:2025(Main)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of monolithic ceramics at room temperature - Determination of compressive strength (ISO 17162:2014)
SIST EN ISO 17162:2026

This document specifies a method for the determination of nominal compressive strength of advanced monolithic technical ceramic materials at room temperature.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3169:2025(Main)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of impurities in aluminium oxide powders using inductively coupled plasma-optical emission spectrometry (ISO 3169:2023)
SIST EN ISO 3169:2026

This document specifies methods for the chemical analysis of impurities present in aluminium oxide powders used as a raw material for fine ceramics.
Aluminium oxide powders are decomposed by acid pressure decomposition, acid decomposition or alkali fusion. The calcium, chromium, copper, iron, magnesium, manganese, potassium, silicon, sodium, titanium, zinc and zirconium contents in the test solution are determined by an inductively coupled plasma-optical emission spectrometer (ICP-OES).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14627:2025(Main)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method (ISO 14627:2012)
SIST EN ISO 14627:2026

ISO 14627:2012 describes a test method that covers the determination of fracture resistance of silicon nitride bearing balls at room temperature by the indentation fracture (IF) method, as specified in ISO 26602.
ISO 14627:2012 is intended for use with monolithic silicon nitride ceramics for bearing balls. It does not include other ceramic materials.
ISO 14627:2012 is for material comparison and quality assurance.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19630:2025(Main)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature (ISO 19630:2025)
SIST EN ISO 19630:2026

This document specifies the conditions for determination of the tensile properties of single filaments of ceramic fibre such as the tensile strength, Young modulus and fracture strain.
This document applies to continuous ceramic filaments taken from tows, yarns, braids and knittings, which have strain to fracture less than or equal to 5 %.
This document does not apply to carbon fibres that exhibit a nonlinear stress-strain curve. This document does not apply to checking the homogeneity of strength properties of fibres, or to assessing the effects of volume under stress. Methods of estimation of strength statistical parameters are indicated.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17138:2025(Main)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of flexural strength (ISO 17138:2025)
SIST EN ISO 17138:2026

This document specifies a test method for the determination of the flexural strength of ceramic matrix composite materials with continuous fibre reinforcement, under three-point or four-point bend at room temperature. This document is applicable to all ceramic matrix composites with a continuous fibre reinforcement, unidirectional (1D), bidirectional (2D), and tridirectional xD with (2 < x ≤ 3) as defined in ISO 19634, loaded along one principal axis of reinforcement.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4255:2025(Main)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of axial tensile properties of tubes (ISO 4255:2025, Corrected version 2025-12)
SIST EN ISO 4255:2025

This document specifies the conditions for determination of the axial tensile properties of ceramic matrix composite (CMC) tubes with continuous fibre-reinforcement at elevated temperature in air, vacuum and inert gas atmospheres. The applicability of this document is specific to tubular geometries because fibre architecture and specimen geometry factors in composite tubes are distinctly different from those in flat specimens.
This document provides information on the axial tensile properties and stress-strain response in temperature, such as axial tensile strength, axial tensile strain at failure and elastic constants. The information can be used for material development, control of manufacturing (quality insurance), material comparison, characterization, reliability and design data generation for tubular components.
This document addresses, but is not restricted to, various suggested test piece fabrication methods. This document is primarily applicable to ceramic matrix composite tubes with a continuous fibrous-reinforcement: unidirectional (1D, filament winding and tape lay-up), bi-directional (2D, braid and weave) and multi-directional (xD, with x > 2), tested along the tube axis.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20505:2025(Main)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of the interlaminar shear strength and shear modulus of continuous-fibre-reinforced composites by the compression of double-notched test pieces and by the Iosipescu test (ISO 20505:2023)
SIST EN ISO 20505:2025

This document specifies a method for the determination of interlaminar shear strength at ambient temperature by the compression of a double-notched test piece and a method for the determination of interlaminar shear strength and modulus at ambient temperature by the Iosipescu test. This document applies to all ceramic matrix composites with a continuous fibre reinforcement, having unidirectional (1D), bidirectional (2D) and multidirectional (xD, with x > 2) fibre architecture, where a major part of reinforcements is a stack of plies.
This document is applicable to material development, material comparison, quality assurance, characterization, reliability and design data generation. The simpler compression test method of a double-notched test piece is applicable only when the shear strength has to be measured.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14544:2025(Main)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of compressive properties (ISO 14544:2025)
SIST EN ISO 14544:2025

This document specifies procedures for determination of the compressive behaviour of ceramic matrix composite materials with continuous fibre reinforcement at elevated temperature in air, vacuum and inert gas atmospheres. This document applies to all ceramic matrix composites with a continuous fibre reinforcement, uni-directional (1D), bidirectional (2D) and multi-directional (xD, with x > 2), tested along one principal axis of reinforcement or off axis conditions for 2D and xD materials. This document also applies to carbon-fibre-reinforced carbon matrix composites (also known as carbon/carbon or C/C). Two cases of testing are distinguished: compression between platens and compression using grips.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14574:2025(Main)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties (ISO 14574:2025)
SIST EN ISO 14574:2025

This document specifies procedures for determination of the tensile behaviour of ceramic matrix composite materials with continuous fibre reinforcement at elevated temperature in air, vacuum and inert gas atmospheres.
This method applies to all ceramic matrix composites with a continuous fibre reinforcement, uni-directional (1D), bidirectional (2D) and multi-directional (xD, with x> 2), tested along one principal axis of reinforcement or off axis conditions for 2D and xD materials. This method also applies to carbon-fibre-reinforced carbon matrix composites (also known as carbon/carbon or C/C).
NOTE            In most cases, ceramic matrix composites to be used at high temperature in air are coated with an anti-oxidation coating.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day