EN 4884:2022

SLOVENSKI STANDARD
01-marec-2023
Aeronavtika - Jeklo X3CrNiMoAl (1.4534) - Indukcijsko taljeno v vakuumu in
pretaljeno s taljivo elektrodo - Topilno žarjena in izločevalno utrjena - Palice za
obdelavo - a ali D ≤ 200 mm - 1200 MPa ≤ Rm ≤ 1350 MPa
Aerospace series - Steel X3CrNiMoAl (1.4534) - Vacuum induction melted and
consumable electrode remelted - Solution treated and precipitation treated - Bars for
machining - a or D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 350 MPa
Luft- und Raumfahrt - Stahl X3CrNiMoAl (1.4534) - Vakuuminduktionserschmolzen und
mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und
ausscheidungsgehärtet - Stangen für die Bearbeitung - a oder D ≤ 200 mm - 1 200 MPa
≤ Rm ≤ 1 350 MPa
Série aérospatiale - Acier X3CrNiMoAl (1.4534) - Élaboré sous vide par induction et
refondu à l'électrode consommable - Mis en solution et précipité - Barres pour usinage -
a ou D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 350 MPa
Ta slovenski standard je istoveten z: EN 4884:2022
ICS:
49.025.10 Jekla Steels
77.140.60 Jeklene palice in drogovi Steel bars and rods
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4884
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 49.025.10
English Version
Aerospace series - Steel X3CrNiMoAl (1.4534) - Vacuum
induction melted and consumable electrode remelted -
Solution treated and precipitation treated - Bars for
machining - a or D  200 mm - 1 200 MPa  Rm  1 350
MPa
Série aérospatiale - Acier X3CrNiMoAl (1.4534) - Luft- und Raumfahrt - Stahl X3CrNiMoAl (1.4534) -
Élaboré sous vide par induction et refondu à l'électrode Vakuuminduktionserschmolzen und mit
consommable - Mis en solution et précipité - Barres selbstverzehrender Elektrode umgeschmolzen -
Lösungsgeglüht und ausscheidungsgehärtet - Stangen
pour usinage - a ou D  200 mm - 1 200 MPa  Rm  1
350 MPa für die Bearbeitung - a oder D  200 mm - 1 200 MPa 
Rm  1 350 MPa
This European Standard was approved by CEN on 22 August 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4884:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

European foreword
This document (EN 4884:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this
document has received the approval of the National Associations and the Official Services of the
member countries of ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2023, and conflicting national standards shall be
withdrawn at the latest by June 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such
patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries
...