EN 1892:2005
(Main)Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties
This document specifies the conditions for determination of tensile properties of ceramic matrix composite materials with continuous fibre reinforcement for temperatures up to 2 000 °C under vacuum or a gas atmosphere which is inert to the material under test.
NOTE The use of these environments is aimed at avoiding changes of the material to be tested due to chemical reaction with its environment during the test.
This document applies to all ceramic matrix composites with a continuous fibre reinforcement, unidirectional (1D), bidirectional (2D), and tridirectional (xD, with 2 < x £ 3), loaded along one principal axis of reinforcement.
Hochleistungskeramik - Mechanische Eigenschaften von keramischen Verbundwerkstoffen bei hoher Temperatur in inerter Atmosphäre - Bestimmung der Eigenschaften unter Zug
Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à haute température sous atmosphère neutre - Détermination des caractéristiques en traction
Le présent document fixe les conditions de détermination des propriétés en traction des matériaux composites
à matrice céramique et à renfort continu pour des températures allant jusqu'à 2 000 °C sous vide ou sous une
atmosphère gazeuse qui soit neutre vis-à-vis du matériau essayé.
NOTE L'utilisation de ces environnements permet d'éviter que le matériau ne subisse des changements dus à une
réaction chimique avec l'environnement pendant l'essai.
Le présent document s'applique à tous les composites à matrice céramique à renfort continu, unidirectionnel
(1D), bidirectionnel (2D), et tridirectionnel (xD, avec 2 < ´ £ 3) sollicités suivant un axe principal de renfort.
Sodobna tehnična keramika – Mehanske lastnosti keramičnih kompozitov pri visoki temperaturi v pogojih inertne atmosfere – Ugotavljanje nateznih lastnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 1892:2005
01-september-2005
1DGRPHãþD
SIST ENV 1892:2000
6RGREQDWHKQLþQDNHUDPLND±0HKDQVNHODVWQRVWLNHUDPLþQLKNRPSR]LWRYSUL
YLVRNLWHPSHUDWXULYSRJRMLKLQHUWQHDWPRVIHUH±8JRWDYOMDQMHQDWH]QLKODVWQRVWL
Advanced technical ceramics - Mechanical properties of ceramic composites at high
temperature under inert atmosphere - Determination of tensile properties
Hochleistungskeramik - Mechanische Eigenschaften von keramischen
Verbundwerkstoffen bei hoher Temperatur in inerter Atmosphäre - Bestimmung der
Eigenschaften unter Zug
Céramiques techniques avancées - Propriétés mécaniques des céramiques composites
a haute température sous atmosphere neutre - Détermination des caractéristiques en
traction
Ta slovenski standard je istoveten z: EN 1892:2005
ICS:
81.060.30 Sodobna keramika Advanced ceramics
SIST EN 1892:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 1892:2005
---------------------- Page: 2 ----------------------
SIST EN 1892:2005
EUROPEAN STANDARD
EN 1892
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2005
ICS 81.060.30 Supersedes ENV 1892:1996
English version
Advanced technical ceramics - Mechanical properties of ceramic
composites at high temperature under inert atmosphere -
Determination of tensile properties
Céramiques techniques avancées - Propriétés mécaniques Hochleistungskeramik - Mechanische Eigenschaften von
des céramiques composites à haute température sous keramischen Verbundwerkstoffen bei hoher Temperatur in
atmosphère neutre - Détermination des caractéristiques en inerter Atmosphäre - Bestimmung der Eigenschaften unter
traction Zug
This European Standard was approved by CEN on 15 March 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1892:2005: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 1892:2005
EN 1892:2005 (E)
Contents
Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms, definitions and symbols.4
4 Principle.6
5 Apparatus .6
6 Test specimens.8
7 Test specimen preparation.15
8 Test procedures.15
9 Calculation of results .17
10 Test report .19
Annex A (informative) Test specimen for us
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.