EN 812:1997
(Main)Industrial bump caps
Industrial bump caps
This European Standard specifies physical and performance requirements, methods of test and marking requirements for industrial bump caps. Industrial bump caps are intended to provide protection to the wearer against the effects of striking his head against hard, stationary objects with sufficient severity to cause laceration or other superficial injuries. They are not intended to provide protection against the effects of falling or thrown objects, or moving or suspended loads. NOTE : An industrial bump cap should not be confused with an industrial safety helmet as specified in EN 397.
Industrie-Anstoßkappe
Diese Europäische Norm legt physikalische Anforderungen und Leistungsanforderungen, Prüfverfahren und die Kennzeichnung von Industrie- Anstoßkappen fest. Industrie-Anstoßkappen dienen dem Kopfschutz des Trägers, wenn der Kopf so stark gegen harte, feststehende Gegenstände prallt, daß es zu einer Platzwunde oder anderen oberflächlichen Verletzungen bis hin zur Selbst-betäubung kommt. Anstoßkappen bieten keinen Schutz gegen die Wirkung fallender oder geworfener Gegenstände, oder sich bewegender oder herabhängender Lasten.
Casquettes anti-heurt pour l'industrie
La présente norme européenne spécifie les exigences physiques et de performance, les méthodes d'essai et les exigences de marquage des casquettes anti-heurt pour l'industrie. Les casquettes anti-heurt pour l'industrie sont destinées à protéger le porteur lorsque sa tête vient heurter des objets durs et immobiles avec suffisamment de force pour provoquer des lacérations ou autres blessures superficielles. Elles ne sont pas destinées à protéger des effets des projections ou chutes d'objets ou des charges en suspension ou en mouvement.
Lahke industrijske čelade za varovanje pred udarci
General Information
- Status
- Withdrawn
- Publication Date
- 21-Oct-1997
- Withdrawal Date
- 31-Jan-2012
- Technical Committee
- CEN/TC 158 - Head protection
- Drafting Committee
- CEN/TC 158/WG 1 - Industrial safety helmets
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Feb-2012
- Completion Date
- 01-Feb-2012
- Ref Project
SIST EN 812:1998 - Industrial bump caps
Relations
- Replaced By
EN 812:2012 - Industrial bump caps - Effective Date
- 08-Feb-2012
- Effective Date
- 08-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
NSF International
Global independent organization facilitating standards development and certification.
Kiwa BDA Testing
Building and construction product certification.
Sponsored listings
Frequently Asked Questions
EN 812:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Industrial bump caps". This standard covers: This European Standard specifies physical and performance requirements, methods of test and marking requirements for industrial bump caps. Industrial bump caps are intended to provide protection to the wearer against the effects of striking his head against hard, stationary objects with sufficient severity to cause laceration or other superficial injuries. They are not intended to provide protection against the effects of falling or thrown objects, or moving or suspended loads. NOTE : An industrial bump cap should not be confused with an industrial safety helmet as specified in EN 397.
This European Standard specifies physical and performance requirements, methods of test and marking requirements for industrial bump caps. Industrial bump caps are intended to provide protection to the wearer against the effects of striking his head against hard, stationary objects with sufficient severity to cause laceration or other superficial injuries. They are not intended to provide protection against the effects of falling or thrown objects, or moving or suspended loads. NOTE : An industrial bump cap should not be confused with an industrial safety helmet as specified in EN 397.
EN 812:1997 is classified under the following ICS (International Classification for Standards) categories: 13.340.10 - Protective clothing. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 812:1997 has the following relationships with other standards: It is inter standard links to EN 812:2012, EN 812:1997/A1:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 812:1997 is associated with the following European legislation: EU Directives/Regulations: 89/686/EEC; Standardization Mandates: M/BC/CEN/90/2. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 812:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1998
/DKNHLQGXVWULMVNHþHODGH]DYDURYDQMHSUHGXGDUFL
Industrial bump caps
Industrie-Anstoßkappe
Casquettes anti-heurt pour l'industrie
Ta slovenski standard je istoveten z: EN 812:1997
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...