EN 4675:2011
(Main)Aerospace series - Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) - Rm ≥ 1 300 MPa - Bars - De < 110 mm
Aerospace series - Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) - Rm ≥ 1 300 MPa - Bars - De < 110 mm
This standard specifies the requirements relating to:
Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0,4Fe)
Rm >or= 1 300 MPa
Bars
De
Luft- und Raumfahrt - Titan Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) - Rm ≥ 1 300 MPa - Stangen - De < 110 mm
Diese Norm legt die Anforderungen an
Titan Ti-P63002 (Ti5Al5Mo5V3Cr0,4Fe) Rm >/= 1 300 MPa Stangen De zur Anwendung in der Luft- und Raumfahrt fest.
Série aérospatiale - Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) - Rm ≥ 1 300 MPa - Barres - De < 110 mm
Aeronavtika - Titan Ti-P63002 (Ti5Al5Mo5V3Cr0,4Fe) - Rm ≥ 1300 MPa - Palice - De < 110 mm
Ta standard določa zahteve, ki se nanašajo na:
titan Ti-P63002 (Ti5Al5Mo5V3Cr0,4Fe),
Rm ≥ = 1300 MPa
palice
De < 110 mm
za uporabo v aeronavtiki.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 4675:2011SIST EN 4675:2011en01-december-2011SIST EN 4675:2011SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4675
June 2011 ICS 49.025.30 English Version
Aerospace series - Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) -Rm ≥ 1 300 MPa - Bars - De < 110 mm
Série aérospatiale - Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) - Rm ≥ 1 300 MPa - Barres - De < 110 mm
Luft- und Raumfahrt - Titan Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) - Rm ≥ 1 300 MPa - Stangen -De < 110 mm This European Standard was approved by CEN on 9 October 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4675:2011: ESIST EN 4675:2011
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.