prEN 13938-3
(Main)Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of deflagration to detonation transition
Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of deflagration to detonation transition
This document specifies a method to determine the tendency of a propellant to undergo transition from deflagration to detonation (DDT). It applies to propellants of a grain size up to 8 mm. This method does not apply to black powder and rocket propellant.
NOTE 1 Due to the nature of the shape of grains (heterogeneous), the combustion of the rocket propellant can cause a crack of the grain causing an explosion of the rocket motor.
NOTE 2 Black powders properties differ significantly from propellant and explosives because black powders are capable of maintaining stable combustion at high velocities without experiencing deflagration - detonation transition.
Explosivstoffe für zivile Zwecke - Treibladungspulver und Raketentreibstoffe - Teil 3: Bestimmung des Überganges der Deflagration in die Detonation
Dieses Dokument legt ein Verfahren für die Bestimmung der Neigung eines Treibmittels, von der Deflagration in die Detonation überzugehen (DTT, en: transition from deflagration to detonation), fest. Es gilt für Treibladungspulver mit einer Korngröße bis zu 8 mm. Dieses Verfahren gilt nicht für Schwarzpulver und Raketentreibstoff.
ANMERKUNG 1 Aufgrund der natürlichen Form der Körner (heterogen) können bei der Verbrennung von Raketentreibstoff Risse im Korn entstehen, die eine Explosion des Raketenantriebsmittels zur Folge haben.
ANMERKUNG 2 Die Eigenschaften von Schwarzpulver unterscheiden sich deutlich von den Eigenschaften des Treibladungspulvers und der Explosivstoffe, da Schwarzpulver in der Lage ist, eine stabile Verbrennung bei hohen Geschwindigkeiten aufrechtzuerhalten, ohne dass es zu einem Übergang der Deflagration in die Detonation kommt.
Explosifs à usage civil - Poudres propulsives et propergols pour fusées - Partie 3 : Méthode de détermination du passage de la déflagration à la détonation
Le présent document décrit une méthode permettant de déterminer la tendance d'une poudre propulsive à transiter de la déflagration à la détonation (TDD). Cette méthode s'applique aux poudres propulsives dont les grains peuvent atteindre jusqu'à 8 mm, mais ne s'applique pas à la poudre noire ou au propergol pour fusées.
NOTE 1 Au vu de la forme des grains (hétérogène), la combustion du propergol pour fusées peut provoquer une fissure du bloc entraînant une explosion du moteur de la fusée.
NOTE 2 Les propriétés des poudres noires diffèrent considérablement entre les poudres propulsives et les explosifs, car les poudres noires sont capables de maintenir une combustion stable à des vitesses élevées sans transition déflagration détonation.
Eksplozivi za civilno uporabo - Smodniki in raketna goriva - 3. del: Ugotavljanje prehoda deflagracije v detonacijo
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 13938-3:2021
01-april-2021
Eksplozivi za civilno uporabo - Smodniki in raketna goriva - 3. del: Ugotavljanje
prehoda deflagracije v detonacijo
Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of
deflagration to detonation transition
Explosivstoffe für zivile Zwecke - Treibladungspulver und Raketentreibstoffe - Teil 3:
Bestimmung des Überganges der Deflagration in die Detonation
Explosifs à usage civil - Poudre propulsive et propergol - Partie 3: Méthode de
détermination du passage de la déflagration à la détonation
Ta slovenski standard je istoveten z: prEN 13938-3
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
oSIST prEN 13938-3:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13938-3:2021
---------------------- Page: 2 ----------------------
oSIST prEN 13938-3:2021
DRAFT
EUROPEAN STANDARD
prEN 13938-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 71.100.30 Will supersede EN 13938-3:2003
English Version
Explosives for civil uses - Propellants and rocket
propellants - Part 3: Determination of deflagration to
detonation transition
Explosifs à usage civil - Poudres propulsives et Explosivstoffe für zivile Zwecke - Treibladungspulver
propergols pour fusées - Partie 3 : Méthode de und Raketentreibstoffe - Teil 3: Bestimmung des
détermination du passage de la déflagration à la Überganges der Deflagration in die Detonation
détonation
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 321.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13938-3:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13938-3:2021
prEN 13938-3:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 4
6 Preparation of test sample . 6
7 Procedure . 6
8 Test report . 8
Annex ZA (informative)
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.