prEN 4474

SLOVENSKI STANDARD
oSIST prEN 4474:2023
01-maj-2023
Aeronavtika - Organski premazi, pigmentirani z aluminijem - Premazne metode
Aerospace series - Aluminium pigmented organic coatings - Coating methods
Luft- und Raumfahrt - Aluminiumpigmentierte organische Beschichtungen -
Beschichtungsverfahren
Série aérospatiale - Revêtements alumino-organiques - Méthodes d’application
Ta slovenski standard je istoveten z: prEN 4474
ICS:
49.025.20 Aluminij Aluminium
49.040 Prevleke in z njimi povezani Coatings and related
postopki, ki se uporabljajo v processes used in aerospace
letalski in vesoljski industriji industry
oSIST prEN 4474:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4474:2023

---------------------- Page: 2 ----------------------
oSIST prEN 4474:2023


DRAFT
EUROPEAN STANDARD
prEN 4474
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2023
ICS 49.040 Will supersede EN 4474:2016
English Version

Aerospace series - Aluminium pigmented organic coatings
- Coating methods
Série aérospatiale - Revêtements alumino-organiques - Luft- und Raumfahrt - Aluminiumpigmentierte
Méthodes d'application organische Beschichtungen - Beschichtungsverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4474:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4474:2023
prEN 4474:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Equipment . 5
4.1 For application by dipping . 5
4.2 For application by spraying . 5
4.3 For curing. 5
5 Surface preparation . 5
6 Coating application . 5
6.1 General.
...