EN 2821:2024

SLOVENSKI STANDARD
oSIST prEN 2821:2021
01-september-2021
Aeronavtika - Jeklo X5CrNiCu15 5 (1.4545) - Pretaljeno s talilno elektrodo - Žarjeno
v topilu in utrjeno - Palice za obdelavo - a ali D ≤ 200 mm - Rm ≥ 1310 MPa
Aerospace series - Steel X5CrNiCu15 5 (1.4545) - Consumable electrode remelted -
Solution treated and precipitation treated - Bars for machining - a or D ≤ 200 mm - Rm ≥
1 310 MPa
Luft- und Raumfahrt - Stahl X5CrNiCu15 5 (1.4545) - Mit selbstverzehrender Elektrode
umgeschmolzen - Lösungsgeglüht und ausscheidungsgehärtet - Stangen zur spanenden
Bearbeitung - a oder D ≤ 200 mm - Rm ≥ 1 310 MPa
Série aérospatiale - Acier X5CrNiCu15 5 (1.4545) - Refondu à l'électrode consommable -
Mis en solution et vieilli - Barres pour usinage - a ou D ≤ 200 mm - Rm ≥ 1 310 MPa
Ta slovenski standard je istoveten z: prEN 2821
ICS:
49.025.10 Jekla Steels
oSIST prEN 2821:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 2821:2021
oSIST prEN 2821:2021
DRAFT
EUROPEAN STANDARD
prEN 2821
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2021
ICS 49.025.10 Will supersede EN 2821:2007
English Version
Aerospace series - Steel X5CrNiCu15 5 (1.4545) -
Consumable electrode remelted - Solution treated and
precipitation treated - Bars for machining - a or D ≤ 200
mm - Rm ≥ 1 310 MPa
Série aérospatiale - Acier X5CrNiCu15 5 (1.4545) - Luft- und Raumfahrt - Stahl X5CrNiCu15 5 (1.4545) -
Refondu à l'électrode consommable - Mis en solution et Mit selbstverzehrender Elektrode umgeschmolzen -
Lösungsgeglüht und ausscheidungsgehärtet - Stangen
vieilli - Barres pour usinage - a ou D ≤ 200 mm - Rm ≥ 1
310 MPa zur spanenden Bearbeitung - a oder D ≤ 200 mm - Rm
≥ 1 310 MPa
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2821:2021 E
worldwide for CEN national Members.

oSIST prEN 2821:2021
prEN 2821:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

oSIST prEN 2821:2021
prEN 2821:2021 (E)
European foreword
This document (prEN 2821:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe – Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 2821:2007.
oSIST pr
...