Industrial valves - Gearbox for valves (ISO 22109:2020)

This document provides basic requirements for gearboxes to operate industrial valves for manual and automated on/off and modulating duties, this includes manual override gearboxes. It includes guidelines for classification, design and methods for conformity assessment.
It does not cover gear systems which are integral part in the design of valves and subsea gearboxes.
Other requirements or conditions of use different from those indicated in this document are agreed between the purchaser and the manufacturer or supplier (first party), prior to order.

Industriearmaturen - Armaturengetriebe (ISO 22109:2020)

Dieses Dokument enthält Grundanforderungen an Getriebe für die Betätigung von Industriearmaturen für manuelles und automatisiertes Öffnen/Schließen und Regelbetrieb, einschließlich Getriebe für Handnotbetätigung. Es enthält Leitlinien für Klassifizierung, Ausgestaltung und Verfahren zur Konformitätsbewertung.
Es deckt keine Getriebe ab, die fester Bestandteil der Armaturenkonstruktion und für subsea-Anwendungen vorgesehen sind.
Andere Anforderungen oder Anwendungsbedingungen als die in diesem Dokument angegebenen werden vor Auftragserteilung zwischen Käufer und Hersteller oder Lieferant (erste Partei) vereinbart.

Robinetterie industrielle - Réducteur pour appareil de robinetterie (ISO 22109:2020)

Le présent document fournit des exigences de base pour que les réducteurs puissent faire fonctionner des appareils de robinetterie industrielle utilisés pour des fonctions manuelles et automatisées de marche/arrêt et de régulation, ce qui inclut les dispositifs de commande de secours. Il comprend des lignes directrices pour la classification, la conception ainsi que des méthodes d'évaluation de la conformité.
Il ne couvre pas les systèmes d'engrenages, lesquels font intégralement partie de la conception des appareils de robinetterie et des réducteurs immergés.
Des exigences ou conditions d'utilisation autres que celles citées dans le présent document font l'objet d'un accord entre l'acheteur et le fabricant ou le fournisseur (première partie), avant la commande.

Industrijski ventili - Gonila za ventile (ISO 22109:2020)

Ta dokument vsebuje osnovne zahteve za gonila, ki se uporabljajo za upravljanje industrijskih ventilov za ročna in avtomatizirana opravila vklopa/izklopa ter modulacije, kar vključuje tudi ročne zaustavitve gonila. Vključuje smernice za razvrščanje, oblikovanje in metode ugotavljanja skladnosti. Ne zajema gonilnih sistemov, ki so sestavni del zasnove ventilov in podvodnih gonil. Kupec in proizvajalec ali dobavitelj (prva stranka) se pred naročilom dogovorita o drugih zahtevah ali pogojih uporabe, ki niso navedeni v tem dokumentu.

General Information

Status
Published
Publication Date
28-Jan-2020
Withdrawal Date
30-Jul-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
29-Jan-2020
Completion Date
29-Jan-2020

Buy Standard

Standard
EN ISO 22109:2020
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2020
Industrijski ventili - Gonila za ventile (ISO 22109:2020)
Industrial valves - Gearbox for valves (ISO 22109:2020)
Industriearmaturen - Armaturengetriebe (ISO 22109:2020)
Robinetterie industrielle - Réducteur pour appareil de robinetterie (ISO 22109:2020)
Ta slovenski standard je istoveten z: EN ISO 22109:2020
ICS:
23.060.01 Ventili na splošno Valves in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 22109
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2020
EUROPÄISCHE NORM
ICS 23.060.01
English Version
Industrial valves - Gearbox for valves (ISO 22109:2020)
Robinetterie industrielle - Réducteur pour appareil de Industriearmaturen - Armaturengetriebe (ISO
robinetterie (ISO 22109:2020) 22109:2020)
This European Standard was approved by CEN on 3 January 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22109:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 22109:2020) has been prepared by Technical Committee ISO/TC 153 "Valves"
in collaboration with Technical Committee CEN/TC 69 “Industrial valves” the secretariat of which is
held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2020, and conflicting national standards shall be
withdrawn at the latest by July 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 22109:2020 has been approved by CEN as EN ISO 22109:2020 without any modification.

INTERNATIONAL ISO
STANDARD 22109
First edition
2020-01
Industrial valves — Gearbox for valves
Robinetterie industrielle — Réducteur pour appareil de robinetterie
Reference number
ISO 22109:2020(E)
©
ISO 2020
ISO 22109:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

ISO 22109:2020(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
4.1 General . 2
4.2 Kind of operation . 2
4.3 Kind of rotation . 2
5 Design requirements . 2
5.1 Endurance . 2
5.2 Structural integrity . 4
5.3 Self-locking/braking . 4
5.4 Mechanical advantage . 4
5.4.1 General. 4
5.4.2 Manual gearboxes and manual override gearboxes . 4
5.4.3 Automated gearboxes . 5
5.5 Environmental conditions . 5
5.5.1 General. 5
5.5.2 Altitude . 5
5.5.3 Enclosure protection . 5
5.5.4 Corrosion protection . 5
5.5.5 Vibration, shock and seismic conditions . 6
5.6 Gearbox attachment . 6
5.6.1 Part-turn gearboxes . 6
5.6.2 Multi-turn gearboxes . . 6
5.7 Primary closing direction . 7
5.8 Other requirements . 7
5.8.1 Manual operation . 7
5.8.2 Position indicator for part-turn gearboxes . 7
5.8.3 End stop for part-turn gearboxes . 7
5.8.4 Gearing lubricant . 7
5.8.5 Noise . 7
6 Optional equipment . 7
7 Type and production test . 8
7.1 General . 8
7.2 Type tests . 8
7.3 Control of production process . 8
8 Marking . 9
8.1 Mandatory markings . . 9
8.2 Optional markings . 9
9 Documentation .10
9.1 General .10
9.2 Mandatory documentation .10
9.3 Optional documentation .10
10 Packaging .10
Annex A (normative) Endurance test procedure .11
Annex B (informative) Load profiles .12
Bibliography .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.