prEN ISO 14343
(Main)Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO/DIS 14343:2024)
Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO/DIS 14343:2024)
ISO 14343:2017 specifies requirements for classification of wire electrodes, strip electrodes, wires and rods for gas-shielded metal arc welding, gas tungsten arc welding, plasma arc welding, submerged arc welding, electroslag welding and laser beam welding of stainless and heat-resisting steels. The classification of the wire electrodes, strip electrodes, wires and rods is based upon their chemical composition.
This document is a combined specification providing for classification utilizing a system based upon nominal composition (system A), or utilizing a system based upon alloy type (system B).
a) Paragraphs which carry the label "classification according to nominal composition" and the suffix letter "A", or "ISO 14343-A", are applicable only to products classified according to system A;
b) Paragraphs which carry the label "classification according to alloy type" and the suffix letter "B", or "ISO 14343-B", are applicable only to products classified according to system B.
c) Paragraphs which carry neither label nor suffix letter are applicable to products that can be classified according to either system A or B or both.
Schweißzusätze - Drahtelektroden, Bandelektroden, Drähte und Stäbe zum Lichtbogenschweißen von nichtrostenden und hitzebeständigen Stählen - Einteilung (ISO/DIS 14343:2024)
Produits consommables pour le soudage - Fils-électrodes, électrodes en feuillard, fils d'apport et baguettes de soudage pour le soudage à l'arc des aciers inoxydables et des aciers résistant aux températures élevées - Classification (ISO/DIS 14343:2024)
ISO 14343:2017 spécifie les exigences relatives à la classification des fils-électrodes, électrodes en feuillard, fils d'apport et baguettes de soudage, pour le soudage à l'arc avec électrode fusible sous protection gazeuse, le soudage à l'arc sous protection gazeuse avec électrode de tungstène (soudage TIG), le soudage plasma, le soudage à l'arc sous flux, le soudage sous laitier (électroconducteur) et le soudage laser des aciers inoxydables et des aciers résistant aux températures élevées. La classification des fils-électrodes, électrodes en feuillard, fils d'apport et baguettes de soudage est basée sur leur composition chimique.
Le présent document permet l'usage de deux systèmes parallèles de classification, par composition nominale (système A) et/ou par type d'alliage (système B).
a) Les paragraphes qui portent la mention «classification d'après la composition nominale» et la lettre «A», ou «ISO 14343-A», ne sont applicables qu'aux produits classifiés selon le système A;
b) les paragraphes qui portent la mention «classification d'après le type d'alliage» et la lettre «B», ou «ISO 14343-B», ne sont applicables qu'aux produits classifiés selon le système B;
c) les paragraphes qui ne portent aucune mention et aucune lettre sont applicables aux produits classifiés soit d'après le système A, soit d'après le système B, soit d'après les systèmes A et B.
Dodajni in pomožni materiali za varjenje - Žične elektrode, tračne elektrode, žice in palice za obločno varjenje nerjavnih in ognjeodpornih jekel - Razvrstitev (ISO/DIS 14343:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 14343:2024
01-junij-2024
Dodajni in pomožni materiali za varjenje - Žične elektrode, tračne elektrode, žice in
palice za obločno varjenje nerjavnih in ognjeodpornih jekel - Razvrstitev (ISO/DIS
14343:2024)
Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding
of stainless and heat resisting steels - Classification (ISO/DIS 14343:2024)
Schweißzusätze - Drahtelektroden, Bandelektroden, Drähte und Stäbe zum
Lichtbogenschweißen von nichtrostenden und hitzebeständigen Stählen - Einteilung
(ISO/DIS 14343:2024)
Produits consommables pour le soudage - Fils-électrodes, électrodes en feuillard, fils
d'apport et baguettes de soudage pour le soudage à l'arc des aciers inoxydables et des
aciers résistant aux températures élevées - Classification (ISO/DIS 14343:2024)
Ta slovenski standard je istoveten z: prEN ISO 14343
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
oSIST prEN ISO 14343:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 14343:2024
---------------------- Page: 2 ----------------------
oSIST prEN ISO 14343:2024
DRAFT
International
Standard
ISO/DIS 14343
ISO/TC 44/SC 3
Welding consumables — Wire
Secretariat: ANSI
electrodes, strip electrodes,
Voting begins on:
wires and rods for arc welding of
2024-04-24
stainless and heat resisting steels —
Voting terminates on:
Classification
2024-07-17
Produits consommables pour le soudage — Fils-électrodes,
électrodes en feuillard, fils d'apport et baguettes de soudage pour
le soudage à l'arc des aciers inoxydables et des aciers résistant
aux températures élevées — Classification
ICS: ISO ics
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 14343:2024(en)
© ISO 2024
---------------------- Page: 3 ----------------------
oSIST prEN ISO 14343:2024
DRAFT
ISO/DIS 14343:2024(en)
International
Standard
ISO/DIS 14343
ISO/TC 44/SC 3
Welding consumables — Wire
Secretariat: ANSI
electrodes, strip electrodes,
Voting begins on:
wires and rods for arc welding of
stainless and heat resisting steels —
Voting terminates on:
Classification
Produits consommables pour le soudage — Fils-électrodes,
électrodes en feuillard, fils d'apport et baguettes de soudage pour
le soudage à l'arc des aciers inoxydables et des aciers résistant
aux températures élevées — Classification
ICS: ISO ics
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 14343:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii
---------------------- Page: 4 ----------------------
oSIST prEN ISO 14343:2024
ISO/DIS 14343:2024(en)
Contents Page
Foreword .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.